160W HID to LED D-Series Headlight Kit – Warm White 4300K
Original price was: ₹7,000.00.₹5,499.00Current price is: ₹5,499.00. Pair
160W D-Series HID to LED conversion – CSP 4070 LEDs in 4300K Warm White for OEM HID projector/reflector housings.
-
- D-Series fit: Suits D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, D8S housings.
- Direct wire: Red (+) and black (-) wires connect to the headlight power feed; ballast must be bypassed.
- High output: 160W per pair (80W each) with focused beam pattern.
- Cooling: Dual copper tubes and turbo fan for thermal control.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 18 × 15 × 5 cm |
 Brand | Durvient |
 Color | Warm White |
 Color Temperature | 4300K |
 Compatible With | HID Bulb Replacement |
 Wattage | 160 |
 Socket/Connector | D1S, D2S/D2R, D3S/D8S, D4S/D4R, D5S |
 Quantity | Set of 2 (1 Pair) |
 Warranty | 18 Months |
 Return Policy | Exchange Only |
HID Socket Guide
| HID Socket | Voltage | Color Temp | Note |
| D1S | 90V | 6000°K | Output from HID Ballast |
| D2S | 90V | 6000°K | Output from HID Ballast |
| D3S/D8S | 12V | 6000°K | D3S and D8S are Cross Compatible, Output from HID Ballast |
| D4S/D4R | 48V | 6000°K | Works with stock HID Ballast |
| D5S | 12 | 6000°K | Works with stock HID Ballast |
160W HID to LED D-Series HID Conversion Kit – Warm White LED
Convert your factory D-Series HID setup to high-output LEDs with this 160W D-Series HID to LED Kit. CSP 4070 LEDs deliver strong, focused light while keeping a compact form factor suitable for OEM projector housings.
4300K Warm White for better performance all year around, whether in clear sky or bad weather for a clean, modern look. Heat is managed by dual copper tubes and a high-speed turbo fan for reliable, long-term use.
⚠️ HID to LED Conversion – D-Series Notice
This kit is a D-Series LED replacement for factory HID bulbs and does not plug into the OEM HID ballast.
- It does not include the D-Series block connector that normally plugs into the ballast.
- The LED runs on two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Watch this video to know more on how to connect the wires:
Key Features:
- D-Series conversion: Designed for D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, D8S OEM HID housings.
- High brightness: 160W per pair (80W per bulb) with 15-core CSP 4070 chips for a strong, focused beam.
- Color options: Available exclusively in 4300K Warm White
- Canbus support: Built-in decoder helps reduce flicker and check-light warnings in most vehicles.
- Efficient cooling: Dual copper tubes plus a turbo fan to move heat away from the LEDs.
Technical Specifications
| Specification | Details |
|---|---|
| Socket Compatibility | D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, D8S (direct-wire HID to LED conversion) |
| LED Type | 2 x 15-core CSP 4070 (55 mil) chips |
| Wattage | 160W per pair (80W per bulb) |
| Color Temperature | 4300K (Warm White) |
| Heat Management | Dual copper tubes + turbo fan |
| Voltage | 11–15V DC (ballast must be bypassed or disconnected) |
Bulb Cross Compatibility Reference Guide
| Bulb | Equivalent To |
|---|---|
| D-Series HID | D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, D8S (direct-wire HID to LED conversion, ballast bypass required) |
Product FAQ
Does this plug into my factory HID ballast?
No. This kit is direct-wire only. The red (+) and black (–) wires must be connected to the headlight power feed, and the OEM HID ballast must be bypassed or disconnected.
Which D-Series bulbs does this replace?
It is intended for D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, and D8S projector housings where there is space for the LED heat sink and fan.
Will my car show bulb errors after conversion?
The built-in Canbus support helps reduce errors and flicker, but some cars may still require additional resistors or decoders depending on how the original HID system is monitored.
Which color temperature should I choose?
4300K Warm White is closer to OEM HID color and works better in clear as well as poor weather conditions.
Do I need to remove factory fitted ballast?
No. You can leave the ballast disconnected but DO NOT remove as the ballast may be contributing in weatherproofing the headlight assembly.
Additional Information
- Packaging: We use eco-friendly and tamper-proof packaging to ensure your product arrives safely.
- Customer Service: For any queries or support, please visit our Contact Us page.
- FAQ Section: Have questions? Check out our FAQ page for more information on our products and services.
Product Tags
160W LED headlight, CSP 4070 LED, Canbus error-free headlight, 4300K warm white LED, D1S, D1R, D2S, D2R, D3S, D3R, D4S, D4R, D5S, D8S, D1H, D2H, 4300k hid
1 review for 160W HID to LED D-Series Headlight Kit – Warm White 4300K
Q & A
160W HID to LED D-Series Headlight Kit - Warm White 4300K
Related products
Black – Virtus, Slavia, Taigun, Kushaq, Golf, Octavia
Auto Dimming IRVM for Mahindra 7XO, XUV700, ScorpioN, Marazzo, XUV500
Important Fitment, Build-to-Order & Return Information
This Auto Dimming IRVM is designed specifically for Mahindra 7XO (till AX7), XUV700 (all variants), ScorpioN (all variants) and Marazzo (all variants). It can also be used on XUV500 when ordered after informing us about the vehicle so that we can dispatch compatible version applicable to models with rain/light sensor.
Each mirror is built to order and includes a fragile glass part. Due to the custom build process and the risk of damage during return shipping, cancellations, returns and exchanges are not allowed for wrong vehicle selection or change of mind.
Installation requires reusing the original Mahindra IRVM metal plate. Please scan the QR code on the side of the mount to watch the step-by-step video showing how to safely remove the plate from the stock mirror and transfer it to this auto-dimming mirror.
The Non-Returnable policy does not affect your warranty rights. If the mirror does not perform as expected or develops a fault, our support team is available to help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Upgrade your Mahindra SUV with the Auto Dimming IRVM for XUV700 / ScorpioN / Marazzo / 7XO. This mirror reduces night-time glare, uses dual light sensors, and is supplied with the wiring and hardware needed for a clean factory-like installation.
- Mahindra-specific fitment: Designed for XUV700 (all variants), ScorpioN, Marazzo and 7XO (till AX7); XUV500 owners should notify us after ordering.
- Auto-dimming: Adjusts to headlight glare automatically for clearer, more comfortable night driving.
- Dual sensors: Uses front and rear light sensors for smooth and accurate dimming response.
- Guided installation: Requires transfer of the original Mahindra IRVM metal plate; scan the mount QR code for the installation video.
- OEM Integration: Mirror shape and mount are tailored to Mahindra SUVs for a neat, factory-style appearance.
2 x Magnetic Puddle Lamp
Add style and safety to your car with the Magnetic Car Door Light. Featuring 7-color LED lighting, infrared sensor control, and a rechargeable battery, these waterproof lights are easy to install and perfect for most car models.
- 7-Color LED: Choose from white, blue, ice blue, red, green, yellow, or pink.
- Infrared Sensor: Automatically turns on/off with door movement.
- Rechargeable Battery: Lasts up to 30-60 days on a single charge.
- Waterproof Design: Durable for all-weather use.
- Easy Installation: Magnetic or adhesive mounting options.
Magnetic Car Door Light Infrared Sensor Controlled LED Puddle (Wireless, Waterproof, and Rechargeable)
Add style and safety to your car with the Magnetic Car Door Light. Featuring 7-color LED lighting, infrared sensor control, and a rechargeable battery, these waterproof lights are easy to install and perfect for most car models.
- 7-Color LED: Choose from white, blue, ice blue, red, green, yellow, or pink.
- Infrared Sensor: Automatically turns on/off with door movement.
- Rechargeable Battery: Lasts up to 30-60 days on a single charge.
- Waterproof Design: Durable for all-weather use.
- Easy Installation: Magnetic or adhesive mounting options.
D3S D3R D4S D4R Xenon HID Ballast For Audi Skoda Mercedes Volkswagen Part No. 8K0 941 597 C 8K0941597 E
- Material: aluminum alloy; Input Voltage: 12V; Output Voltage: 85V; Output Power: 35W; Lifetime expectancy: 2000H; Compatibility: D3S/D3R D4S/D4R; Fits: left or right headlight
- OEM Part Number : 8K0941597, 8K0941597E; Interchange Part Number : 8K0941597E, BAM92-143700, W003T20171, W003T22071
- Fits Audi, BMW, Mercedes, Volkswagen, Skoda, Lamborgini with D3S/D4S HID/Xenon Headlight
- Easy Installation : Direct Replacement, no coding/programming required
- Note: please check if the number of your previous xenon ballast is exactly the same as the number(s) stated in the listing, or through the amazonconfirmedfit to make sure weather it fit for your previous hid ballast
D Series LED Plug & Play HID to LED Conversion Kit – D1S D2S D3S D4S D5S D8S – 15000LM 6000K
The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.
- High Brightness: 15000LM/Pair for superior illumination
- Easy Installation: Plug & Play, no modifications needed
- Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
- Durable: Lifespan over 50,000 hours, IP68 waterproof
- Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets
Important: Works with stock HID Ballast only. Ensure ballast is in working condition.
Silver – Virtus, Slavia, Taigun, Kushaq, Golf, Octavia
D3S D8S HID to LED Conversion Kit (Plug and Play)
The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.
- High Brightness: 15000LM/Pair for superior illumination
- Easy Installation: Plug & Play, no modifications needed
- Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
- Durable: Lifespan over 50,000 hours, IP68 waterproof
- Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets
Important: Works with stock HID Ballast only. Ensure ballast is in working condition.
Motor Accessories
Auto Parts
Connectors & Tools
Vehicle Electronics
Headlights
Internal & External Lights
Stereo & Displays
Drone Accessories
Drone Parts
Ankit Bishnoi –
I ordered the Durvient 150W warm white LEDs for my Skoda Octavia MK3, and I’m really impressed with the performance. The brightness is excellent, and the throw is very good, giving much better visibility at night compared to stock bulbs. The warm white color looks premium and is comfortable for long drives.
The build quality of the product feels solid, and the LEDs seem well-made. Installation was easy, and they fit perfectly without any issues. Overall, a great upgrade for anyone looking for brighter and better-quality lights for their Octavia.
Highly recommended 👍