Compare

Quick view

Add to wishlist

DJI Mini 5 Pro Propeller Blades (Pack of 4)

Pack of 4 Blades

Add to cart

Low-noise blades for DJI Mini 5 Pro Propellers - 6028F blades for smooth, stable flight.

- Made for Mini 5 Pro: Sized and balanced for the Mini 5 Pro drone.
- Low noise: Blade profile helps reduce flight noise.
- Durable plastic: Tough yet flexible material resists cracks.
- Quick-release: Tool-free install and removal.

Full set: 4 blades, enough for one drone.

Soft Silicone Protective Cover DJI RC-N1, N2, N3 – Enhanced Grip and Drop Protection

Cover

Select options

Grab Soft Silicone Cover DJI RC-N1, N2, or N3 remote controller with this soft silicone cover. Designed for non-display controllers, it offers enhanced grip, drop protection, and easy cleaning.

Enhanced Grip: Non-slip silicone texture for secure handling.
Drop Protection: Absorbs shocks to prevent damage.
Precision Fit: Full access to buttons, ports, and switches.
Easy to Clean: Resists dirt, dust, and oil.
Compatibility: DJI RC-N1, N2, N3 (Non-Display Controllers).

T15 W16W/WY16W Canbus Error-Free LED Bulb – 2016 SMD LEDs, 360° Illumination, Plug-and-Play

Rated 5.00 out of 5

Set of 2

Select options

Upgrade your vehicle’s lighting with the T15 W16W/WY16W Canbus Error-Free LED Bulb. Featuring 48 advanced 2016 SMD LEDs, it delivers bright, energy-efficient illumination for turn signals, reverse lights, and parking lights.

48x 2016 SMD LEDs: Brighter and more efficient than traditional LEDs.
Canbus Error-Free: No hyperflashing or dashboard warnings.
360° Illumination: Ensures visibility from all angles.
Plug-and-Play: Direct replacement for T15 W16W/WY16W halogen bulbs.
Durable Cooling: Thick aluminum heat sink for extended lifespan.
Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).

SIngle to Dual Horn Splitter Harness for Skoda Volkswagen

Rated 4.83 out of 5

Harness

Add to cart

Important Purchase Notice

This is a non-returnable product. Please verify compatibility with your installer, dealer, or electrician before placing the order.

Order only after confirming the correct connector and use case for your vehicle.

Single to Dual Horn Harness - Complete plug-and-play kit to convert your single horn setup to dual horns without cutting factory wires.

Complete Kit: 1 male + 2 female connectors pre-assembled with 1.2 meter long wiring harness.
No Modification: Plug-and-play installation.
Dual Conversion: Converts single connection to dual outputs.
Compatible with: Skoda Kylaq, Kushaq, Slavia, Rapid. Volkswagen Polo, Taigun, Virtus, Vento etc.
Connector Type: 4D0 971 992 male and female connectors.

Polo/Vento Auto Switch (Internal Sensor)

Rated 5.00 out of 5

Qty

Add to cart

📦 Pre-Order Notice

This product is available for pre-order with an estimated delivery time of 20-25 days from your order date.

By placing a pre-order, you'll secure your unit from our upcoming shipment and receive priority processing. Your payment will only be processed when your order is ready to ship.

We'll keep you updated throughout the process via email & whatsapp. Thank you for your patience and understanding!

Red Joystick for RC2, RC1/Smart RC

Rated 5.00 out of 5

Set

Add to cart

Upgrade your DJI controller with the Remote Control Rocker Joystick for DJI RC, RC2, RC Pro. These CNC precision aluminum thumbsticks offer enhanced control, durability, and comfort for DJI Mini 3, Mini 4 Pro, Air 3, and Mavic 3 controllers.

Precision CNC Design: High-quality aluminum for superior control.
Anti-Skid Knurling: Secure grip for precise navigation.
Rustproof Durability: CNC anodized aluminum for long-lasting use.
Perfect Fit: Compatible with DJI Smart RC1 and RC2 controllers.
Lightweight and Portable: Easy to carry without compromising quality.

H4 Mini Projector With Sharp Cut-Out 35W H4, HS1, H19 6000K White, 300% Brighter for Cars & Motorcycles

Rated 4.88 out of 5

Pc

Select options

The H4 Mini Projector LED Headlight offers sharp cut-out beam control, bright 6000K light, and a long lifespan. Compatible with cars and motorcycles, it’s a reliable upgrade for superior visibility.

300% Brighter Than Halogen Bulbs: 35W power with CSP chips ensures exceptional brightness.
Sharp Beam Cut-Off: Avoids glare for oncoming drivers.
Efficient Heat Dissipation: Aviation-grade aluminum housing and cooling fan extend lifespan.
Easy Installation: Plug-and-play design for H4/HS1/H19 sockets.
Durable and Waterproof: IP65 rating ensures performance in all weather conditions.

Step-by-Step installation guide available here: Teambhp, courtesy: Atharva M.

Silver – Virtus, Slavia, Taigun, Kushaq, Golf, Octavia

Rated 5.00 out of 5

Set

Add to cart

For Volkswagen Virtus, Taigun, Skoda Slavia, Kushaq

50 x Red Heat Shrinking Sleeves

Packs

Add to cart

The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.

All-in-One Solution: Combines soldering, sealing, and insulation.
IP67 Waterproof: Ensures maximum water and corrosion resistance.
High-Quality Materials: Polyolefin tubing and hot melt adhesive.
Easy to Use: No additional tools required; heat shrink technology.
Wide Compatibility: Available in multiple sizes for various wire gauges (click here).

Metal Bracket for Flip Lid Logo Emblem Camera

Rated 4.83 out of 5

Set

Add to cart

Metal Plate and 3 X Screws. Only 2 screws can be mounted on Polo.

VAG Horn Female Connector

Rated 4.86 out of 5

Pc

Add to cart

OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.

OEM Fit: Direct replacement 4D0 971 992 connectors
Dual Options: Available as male or female connectors
Pre-Wired: 6-inch harness for easy installation
High Power: 100W capacity for all horn types

Red T10/T15 LED

Rated 4.84 out of 5

Set

Add to cart

Upgrade your vehicle’s lighting with the W5W W16W Canbus T10 T15 Canbus LED Bulbs. Featuring 26 double-sided 4014 LED chips, these bulbs deliver intense brightness, energy efficiency, and error-free operation for a variety of automotive lighting needs.

High-Intensity Illumination: 26 LED chips for superior brightness.
Error-Free Design: Built-in resistors eliminate Canbus errors.
Energy Efficient: Consumes only 5 watts per bulb.
Compact Size: Fits standard automotive light housings.
Versatile Use: Ideal for parking, cabin, and license plate lights.
NOTE: Please ensure that the light housing has a minimum clearance of 26mm from the socket to accommodate the fitment of this long LED.

Canbus Error-Free White DRL LED for Daytime Running Lights – Build to Order (Only DRL, 🚫 No Indicator)

Set of 2

Select options

Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.

Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
Durable & Efficient: Long-lasting construction with minimal power draw.
Easy Installation: Rubber grommet and plug-and-play design for seamless setup.

Transparent Car Windshield Parking Ticket Holder Acrylic Note and Card Organizer

Rated 5.00 out of 5

Select options

Organize your car windshield with the Transparent Parking Ticket Holder. This acrylic clip securely displays parking tickets, notes, or cards without blocking your view.

Discreet Design: Fully transparent and low-profile.
Easy Installation: Adhesive tape (no residue).
Multi-Use: Holds tickets, cards, or shopping lists.
Durable Material: Shatter-resistant acrylic plastic.
Universal Fit: Works on glass, fridges, or doors.

Lanyard for DJI RC2/RC1/RC Pro Smart Remote Controllers

Rated 4.80 out of 5

Set

Add to cart

Upgrade your drone setup with the DJI Smart RC Neck Strap Lanyard. Featuring adjustable length and universal compatibility, it ensures hands-free convenience and secure controller handling for DJI Mini 4 Pro, Air 3, and Mavic 3.

Adjustable Length: 76 cm to 140 cm for a customized fit.
Premium Build: Silk nylon and stainless steel for durability.
Universal Compatibility: Fits DJI Smart RC, RC2, and RC Pro.
C-Type Ring: Easy storage without disassembly.
Lightweight Design: Reduces neck strain during long flights.

Anti Glare IRVM (Mount no. 29) with Reverse Camera & DIsplay for Tata Mahindra Citroen

Set

Add to cart

Compatibility table

Car manufacturer	Car models
Tata	Altroz, Aria, Bolt, Harrier, Hexa, Indica, Indigo, Manza, Nano, Nexon, Nexon EV, Punch, Safari, Safari (2nd Gen), Tiago, Tiago EV, Tigor, Tigor EV, Zest
Citroen	C3, C5, C3 Aircross
Mahindra	Mahindra Thar (Facelifted), Bolero Neo, Scorpio, KUV100, TUV, Nuvosport, Quanto, Xylo (3rd Gen)

Sort by

Price filter

Compatibility table

Newsletter Subscribe

Follow Us

All About Us

Our Policies

Useful Links

Subscribe Newsletter

Secure Payment Options

"Extra saving" when checking out using UPI.

Sort by

Price filter

FILTER BY COLOR

Filter by brand

Automotive

DJI Accessories

Compatibility table

Newsletter Subscribe

Follow Us

All About Us

Our Policies

Useful Links

Subscribe Newsletter

Secure Payment Options

"Extra saving" when checking out using UPI.