Filter by brand
100 x Blue Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
OEM VAG Horn Connectors – Male/Female 4D0 971 992 with 6-inch Wires for Volkswagen, Skoda, Audi
OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
- OEM Fit: Direct replacement 4D0 971 992 connectors
- Dual Options: Available as male or female connectors
- Pre-Wired: 6-inch harness for easy installation
- High Power: 100W capacity for all horn types
160W D4S/D4R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
160W D1S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
150W H1 6000K White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
150W LED Headlight Foglamp Kit with CSP 4070 LED Chip – Warm White 4300K / Cool Daylight 6000K
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
T5 W3W LED Bulbs For Dash, Backlight, Panel Lights
Upgrade your car’s interior lighting with T5 LED Bulbs W3W. This pair of 3030-chip LEDs offers 300 lumens of crisp white light for dashboards, buttons, and consoles. Easy to install and universally compatible.
- Bright: 6000K white light for clear visibility.
- Plug-and-Play: Swap bad bulb with LED without any modification.
- Universal Fit: Replaces T5 W3W and more.
- Durable: Shockproof, dustproof, and long-lasting.
10 x Red Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
Professional Automotive Wiring Harness Tape – Flame-Retardant Felt Cloth Tape (19mm x 15M)
Upgrade your automotive wiring protection with Automotive Wiring Harness Tape flame-retardant felt cloth tape. Designed for high temps and easy installation, it reduces noise and ensures professional-grade durability.
- Heat-Resistant: Withstands up to 105°C for engine bay use.
- Strong Adhesive: No residue, secure bonding.
- Easy to Tear: No tools needed – tear by hand.
- Durable: Resists oil, abrasion, and moisture.
- Vibration Control: Minimizes coil whine and rattling.
160W HID to LED D-Series Headlight Kit – Warm White 4300K
160W D-Series HID to LED conversion – CSP 4070 LEDs in 4300K Warm White for OEM HID projector/reflector housings.
-
- D-Series fit: Suits D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, D8S housings.
- Direct wire: Red (+) and black (-) wires connect to the headlight power feed; ballast must be bypassed.
- High output: 160W per pair (80W each) with focused beam pattern.
- Cooling: Dual copper tubes and turbo fan for thermal control.
150W H1 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
150W H4, HS1, H19 6000K White
Amber/Orange T10/T15 LED
Upgrade your vehicle’s lighting with the W5W W16W Canbus T10 T15 Canbus LED Bulbs. Featuring 26 double-sided 4014 LED chips, these bulbs deliver intense brightness, energy efficiency, and error-free operation for a variety of automotive lighting needs.
- High-Intensity Illumination: 26 LED chips for superior brightness.
- Error-Free Design: Built-in resistors eliminate Canbus errors.
- Energy Efficient: Consumes only 5 watts per bulb.
- Compact Size: Fits standard automotive light housings.
- Versatile Use: Ideal for parking, cabin, and license plate lights.
- NOTE: Please ensure that the light housing has a minimum clearance of 26mm from the socket to accommodate the fitment of this long LED.
50 x Red Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
TE 962883-1 & TE 964274-2 Crimp Terminal Pair (Male & Female) – 2.8×0.8mm Automotive Connectors for VW, BMW, Audi, Honda
Upgrade your automotive wiring with the TE 962883-1 & TE 964274-2 Crimp Terminal Pair. This male and female set ensures secure, OE-standard connections for VW, Audi, BMW, and Honda vehicles.
- Dual Variations: Male and female terminals sold separately (10 pieces per pack).
- OE Quality: Precision fit for reliable electrical connections.
- 24A Rating: Handles low-power systems like audio and lighting.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Honda models.
- Compact Design: 2.8x0.8mm tab for exact fitment.
Waterproof Heat Shrink Solder Sleeve Connector for Cable Insulation Wire Connector (Different Sizes)
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
