Filter by brand
- BRDRC 4
DurvientDurvient 104- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 4
- TE Connectivity 3
- Volkswagen 15
Auto Dimming IRVM for Skoda Slavia, Kushaq, Kylaq (No Rain/Light Sensor)
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
160W D1S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
TE Connectivity 1534334-1 Crimp Terminal for VAG BCM J519 T73A T73C Connector Pins
TE Connectivity 1534334-1 – Genuine AMP MCP 1.5K female receptacle terminal. Designed for 1.5 mm² wire. Used in VAG BCM J519 73-pin connectors (pins 64, 65, 67–72) for lighting circuits.
- Part Number: 1534334-1
- Type: Receptacle (Female)
- Wire Size: 1.5 mm² (15-17 AWG)
- Current Rating: 12–13A
- Application: BCM J519 T73a and T73c connectors
160W HID to LED D-Series Headlight Kit – Warm White 4300K
160W D-Series HID to LED conversion – CSP 4070 LEDs in 4300K Warm White for OEM HID projector/reflector housings.
-
- D-Series fit: Suits D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, D8S housings.
- Direct wire: Red (+) and black (-) wires connect to the headlight power feed; ballast must be bypassed.
- High output: 160W per pair (80W each) with focused beam pattern.
- Cooling: Dual copper tubes and turbo fan for thermal control.
Male & Female Connector Part no. 3B0 972 712, 3B0 972 702
2 Pairs x H7 LED Brackets
Upgrade your vehicle’s lighting with the H7 LED Bracket Bulb Adapter. Designed for H7 reflector-based headlights, this durable bracket ensures secure installation of LED/HID bulbs in Volkswagen, Skoda, Audi, and Mercedes models.
- High-Tension Steel: Heat and corrosion-resistant for longevity.
- Plug-and-Play: No modifications to stock headlights.
- Wide Compatibility: Fits VW, Skoda, Audi, BMW, Mercedes.
- Lightweight Design: 5g per bracket for easy handling.
- Secure Fit: Keeps bulbs firmly locked in place.
Auto Dimming IRVM for Tata Tiago, Tiago EV, Tigor, Tigor EV,
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Professional Automotive Wiring Harness Tape – Flame-Retardant Felt Cloth Tape (19mm x 15M)
Upgrade your automotive wiring protection with Automotive Wiring Harness Tape flame-retardant felt cloth tape. Designed for high temps and easy installation, it reduces noise and ensures professional-grade durability.
- Heat-Resistant: Withstands up to 105°C for engine bay use.
- Strong Adhesive: No residue, secure bonding.
- Easy to Tear: No tools needed – tear by hand.
- Durable: Resists oil, abrasion, and moisture.
- Vibration Control: Minimizes coil whine and rattling.
1 x HS1, H4 LED for Motorcycle, Scooter
Upgrade your motorcycle or scooter’s lighting with the High-Performance Headlight LED for Motorcycle, Scooter. Featuring 6000K white light and 24 CSP 3570 chips, it delivers exceptional brightness and reliability for night rides.
- 6000K White Light: Bright, clear illumination for enhanced visibility.
- 24 CSP Chips: Reliable performance for low and high beams.
- Plug-and-Play: Easy installation with HS1, H4, H19, and HB2/9003 connectors.
- Durable Build: Aviation-grade aluminum with heat dissipation.
- Error Prevention: Built-in smart chip prevents bulb-out errors.
RS3 3-Inch Bi-LED Dual Laser Fog Projector – White/Tri Color, IP65 Waterproof (Cars and Bikes)
Enhance nighttime driving safety with the RS3 3-Inch Bi-LED Dual Laser Fog Projector. Featuring dual lasers, a 6000K Daylight White beam, and IP65 waterproofing, it’s built for unmatched visibility and durability.
- Multi-Color Options: Chose from ONLY white or Tri-Color options to fit your requirement.
- Dual Laser Spotlights: Precision beams for long-range visibility.
- Indian Road Legal: Right-hand or Flat Cut-out drive beam pattern compliant with regulations.
- Universal Fit: Fits cars and bikes with 3-inch fog lamp assemblies.
- IP65 Rated: Waterproof and dustproof for all weather.
Premium Ultra Compact T10 Canbus LED Bulb – W5W WY5W Halogen Replacement for Automotive Lighting
Upgrade your vehicle’s lighting with the Ultra-Compact T10 Canbus LED Bulbs. These error-free, energy-efficient bulbs are perfect for replacing halogens in cabin lighting, license plates, and parking lights.
- Canbus Error-Free: No flickering or dashboard warnings.
- Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
- Plug-and-Play: Matches halogen size (9x23mm).
- Multi-Use: Ideal for interiors, license plates, and more.
- Energy Saver: Uses 80% less power than halogens.
OBD II Extension Cable Angled Connector, 30 CM
The 30 CM OBD II Extension Cable offers effortless connectivity for diagnostic tools and GPS trackers. Its flat ribbon design and 90-degree angle ensure durability and flexibility for tight installations.
- 16-pin male-to-female connector for OBD II devices.
- Flat, ribbon-like cable for easy routing.
- Supports all OBD II protocols, including CAN.
- 90-degree angle reduces wear on ports and tools.
- Compact 30 CM length perfect for tight spaces.
50 x Blue T-Tap Connectors
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
White T10 W5W LED
Upgrade your vehicle’s lighting with the Ultra-Compact T10 Canbus LED Bulbs. These error-free, energy-efficient bulbs are perfect for replacing halogens in cabin lighting, license plates, and parking lights.
- Canbus Error-Free: No flickering or dashboard warnings.
- Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
- Plug-and-Play: Matches halogen size (9x23mm).
- Multi-Use: Ideal for interiors, license plates, and more.
- Energy Saver: Uses 80% less power than halogens.
10A Mini Fuse (Pack of 10)
Protect your vehicle’s electrical system with the Mini Fuse ATM APM Fuse Kit. Designed for European cars, this kit includes color-coded fuses in multiple amperage ratings for easy identification and quick replacement.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy to identify and replace.
- Durable Materials: Zinc alloy and non-conductive plastic.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Mercedes, and more.
- Secure Storage: Includes a labeled storage box.
TE 962883-1 & TE 964274-2 Crimp Terminal Pair (Male & Female) – 2.8×0.8mm Automotive Connectors for VW, BMW, Audi, Honda
Upgrade your automotive wiring with the TE 962883-1 & TE 964274-2 Crimp Terminal Pair. This male and female set ensures secure, OE-standard connections for VW, Audi, BMW, and Honda vehicles.
- Dual Variations: Male and female terminals sold separately (10 pieces per pack).
- OE Quality: Precision fit for reliable electrical connections.
- 24A Rating: Handles low-power systems like audio and lighting.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Honda models.
- Compact Design: 2.8x0.8mm tab for exact fitment.
