Filter by brand
R23 160W H4 H19 HS1 4300K Warm White
PS24W PSX24W DRL White
Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
10 x 2.8mm Male Pin
Upgrade your automotive wiring with the TE 962883-1 & TE 964274-2 Crimp Terminal Pair. This male and female set ensures secure, OE-standard connections for VW, Audi, BMW, and Honda vehicles.
- Dual Variations: Male and female terminals sold separately (10 pieces per pack).
- OE Quality: Precision fit for reliable electrical connections.
- 24A Rating: Handles low-power systems like audio and lighting.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Honda models.
- Compact Design: 2.8x0.8mm tab for exact fitment.
VAG Horn Female Connector
OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
- OEM Fit: Direct replacement 4D0 971 992 connectors
- Dual Options: Available as male or female connectors
- Pre-Wired: 6-inch harness for easy installation
- High Power: 100W capacity for all horn types
150W H4, HS1, H19 6000K White
160W D4S/D4R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Red Car Door Reflective Sticker
Enhance your vehicle’s safety with the Car Door Reflective Stickers. These high-visibility reflectors warn approaching vehicles when your car doors are open, reducing accident risks in low-light conditions.
- Enhanced Safety: Alerts drivers to open car doors.
- Multicolor Options: Available in Red, White, Yellow, and Green.
- Easy Installation: Peel-and-stick adhesive for quick setup.
- Durable Material: High-quality reflective plastic for longevity.
- Complete Coverage: Pack of 4 stickers for all car doors.
10 x 2.8mm Male + Female Pins
Upgrade your automotive wiring with the TE 962883-1 & TE 964274-2 Crimp Terminal Pair. This male and female set ensures secure, OE-standard connections for VW, Audi, BMW, and Honda vehicles.
- Dual Variations: Male and female terminals sold separately (10 pieces per pack).
- OE Quality: Precision fit for reliable electrical connections.
- 24A Rating: Handles low-power systems like audio and lighting.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Honda models.
- Compact Design: 2.8x0.8mm tab for exact fitment.
150W H7 H18 4300K Warm White
10 x Blue Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
10 x 2.8mm Female Pin
Upgrade your automotive wiring with the TE 962883-1 & TE 964274-2 Crimp Terminal Pair. This male and female set ensures secure, OE-standard connections for VW, Audi, BMW, and Honda vehicles.
- Dual Variations: Male and female terminals sold separately (10 pieces per pack).
- OE Quality: Precision fit for reliable electrical connections.
- 24A Rating: Handles low-power systems like audio and lighting.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Honda models.
- Compact Design: 2.8x0.8mm tab for exact fitment.
50 x Blue Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
150W H8, H9, H11, H16 6000K White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
160W D2S/D2R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
W21W T20 DRL White
Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
160W D1S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
