Filter by brand
Rear Footwell Kit for VW Skoda
SIngle to Dual Horn Splitter Harness for Skoda Volkswagen
Single to Dual Horn Harness - Complete plug-and-play kit to convert your single horn setup to dual horns without cutting factory wires.
- Complete Kit: 1 male + 2 female connectors pre-assembled with 1.2 meter long wiring harness.
- No Modification: Plug-and-play installation.
- Dual Conversion: Converts single connection to dual outputs.
- Compatible with: Skoda Kylaq, Kushaq, Slavia, Rapid. Volkswagen Polo, Taigun, Virtus, Vento etc.
- Connector Type: 4D0 971 992 male and female connectors.
Important Purchase Notice
This is a non-returnable product. Please verify compatibility with your installer, dealer, or electrician before placing the order.
Order only after confirming the correct connector and use case for your vehicle.
Black – Style D (match the key fob design)
Canbus Error Free T15 W16W/WY16W LED Bulb – Turn Signal, Reverse & Parking Lights (360° Illumination, No Hyperflash)
Upgrade your vehicle’s lighting with the Canbus Error Free T15 W16W/WY16W LED Bulb. Featuring 360° illumination and no hyperflash, this bulb is perfect for turn signals, reverse lights, and parking lights.
- Canbus Error-Free: Prevents dashboard warnings and hyperflashing.
- 360° Illumination: Ensures visibility from all angles.
- Energy Efficient: 9W power consumption for reduced energy use.
- Plug-and-Play: Matches halogen bulb size for easy installation.
- Durable Cooling: Aluminum heat sink for extended lifespan.
- Wide Compatibility: Compatible with 90% of the vehicles without Error and hyper flashes.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
50 x Green Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
TE Connectivity 1534334-1 Crimp Terminal for VAG BCM J519 T73A T73C Connector Pins
TE Connectivity 1534334-1 – Genuine AMP MCP 1.5K female receptacle terminal. Designed for 1.5 mm² wire. Used in VAG BCM J519 73-pin connectors (pins 64, 65, 67–72) for lighting circuits.
- Part Number: 1534334-1
- Type: Receptacle (Female)
- Wire Size: 1.5 mm² (15-17 AWG)
- Current Rating: 12–13A
- Application: BCM J519 T73a and T73c connectors
150W H3 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
1 x 2.8mm Male Connector 191972712
9W Orange/Amber T15 W16W for Indicators Turn Signal, Parking
Upgrade your vehicle’s lighting with the T15 W16W/WY16W Canbus Error-Free LED Bulb. Featuring 48 advanced 2016 SMD LEDs, it delivers bright, energy-efficient illumination for turn signals, reverse lights, and parking lights.
- 48x 2016 SMD LEDs: Brighter and more efficient than traditional LEDs.
- Canbus Error-Free: No hyperflashing or dashboard warnings.
- 360° Illumination: Ensures visibility from all angles.
- Plug-and-Play: Direct replacement for T15 W16W/WY16W halogen bulbs.
- Durable Cooling: Thick aluminum heat sink for extended lifespan.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
License Plate Mounted Reversed Backup Camera for Slavia, Kushaq, Kylaq
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
OBD II Extension Cable Angled Connector, 30 CM
The 30 CM OBD II Extension Cable offers effortless connectivity for diagnostic tools and GPS trackers. Its flat ribbon design and 90-degree angle ensure durability and flexibility for tight installations.
- 16-pin male-to-female connector for OBD II devices.
- Flat, ribbon-like cable for easy routing.
- Supports all OBD II protocols, including CAN.
- 90-degree angle reduces wear on ports and tools.
- Compact 30 CM length perfect for tight spaces.
150W H8, H9, H11, H16 6000K White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
25A Mini Fuse (Pack of 10)
Protect your vehicle’s electrical system with the Mini Fuse ATM APM Fuse Kit. Designed for European cars, this kit includes color-coded fuses in multiple amperage ratings for easy identification and quick replacement.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy to identify and replace.
- Durable Materials: Zinc alloy and non-conductive plastic.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Mercedes, and more.
- Secure Storage: Includes a labeled storage box.
Polo/Vento/Rapid Anti-Glare ORVM Mirror Glass (Type1 2010-2014)
Reverse Camera with Boot Latch Button for Skoda Karoq, Kodiaq (Gen1)
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
License Plate Mounted Reversed Backup Camera for Volkswagen Vento
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.