Daily Shipping
Daily dispatch
Express Shipping
Pay as you need
Brand Warranty
Hassle Free Warranty
Expert Support
Just a chat/call away
Premium Products
Handpicked for you
SALE PRODUCTS
Automotive Grade Load Resistor – 6 Ohm, 25W/50W, Fix LED Hyperflash & Fast Blinking
Fix LED hyperflash and fast blinking with the 6 Ohm Load Resistor. Available in 25W and 50W options, this durable aluminum resistor ensures smooth turn signal operation and easy installation.
- Hyperflash Fix: Corrects fast blinking and dashboard warnings.
- Durable Build: Aluminum casing with cooling grooves.
- Easy Installation: Includes quick splice connectors for tool-free setup.
- Wide Compatibility: Works with 12V vehicles and industrial systems.
- Options Available: 25W or 50W to match your power needs.
Warm White T10 W5W LED
Upgrade your vehicle’s lighting with the Ultra-Compact T10 Canbus LED Bulbs. These error-free, energy-efficient bulbs are perfect for replacing halogens in cabin lighting, license plates, and parking lights.
- Canbus Error-Free: No flickering or dashboard warnings.
- Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
- Plug-and-Play: Matches halogen size (9x23mm).
- Multi-Use: Ideal for interiors, license plates, and more.
- Energy Saver: Uses 80% less power than halogens.
10 x Blue T-Tap Connectors
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
Soft Silicone Protective Cover DJI RC-N1, N2, N3 – Enhanced Grip and Drop Protection
Grab Soft Silicone Cover DJI RC-N1, N2, or N3 remote controller with this soft silicone cover. Designed for non-display controllers, it offers enhanced grip, drop protection, and easy cleaning.
- Enhanced Grip: Non-slip silicone texture for secure handling.
- Drop Protection: Absorbs shocks to prevent damage.
- Precision Fit: Full access to buttons, ports, and switches.
- Easy to Clean: Resists dirt, dust, and oil.
- Compatibility: DJI RC-N1, N2, N3 (Non-Display Controllers).
OEM Dual Tone Horn Set for Volkswagen Skoda Audi
OEM Dual Tone Horn Set - Direct replacement for Audi, Volkswagen, and Skoda vehicles. Features high and low tone discs with pre-attached mounting bracket.
- Complete Set: High + low tone horns included
- Wide Compatibility: Fits Virtus, Slavia, Kylaq, Taigun, Polo, Rapid, Octavia, A3, A4, etc.
- Durable Build: IP67 waterproof, salt spray tested
- Easy Installation: Metal bracket pre-attached
Important: VW branding will appear scratched out due to import restrictions on VAG branded product imports.
TE 1534334-1 Pin for BCM J519 MQB Platform T73 Terminal (Pack of 8)
TE Connectivity 1534334-1 – Genuine AMP MCP 1.5K female receptacle terminal. Designed for 1.5 mm² wire. Used in VAG BCM J519 73-pin connectors (pins 64, 65, 67–72) for lighting circuits.
- Part Number: 1534334-1
- Type: Receptacle (Female)
- Wire Size: 1.5 mm² (15-17 AWG)
- Current Rating: 12–13A
- Application: BCM J519 T73a and T73c connectors
Laura (Manual AC) Stereo Frame Fascia
Upgrade your Skoda’s stereo system with the Double Din Facia RCD Stereo Frame. Designed for Skoda Yeti, Laura, and Octavia models, this facia ensures a seamless fit for RCD330, RCD340, RCD360, and RCD880 head units.
- Compatibility: Upgrades RCD510/Swing/Bolero to modern multimedia systems.
- Perfect Fit: Seamlessly integrates with your dashboard.
- Durable ABS Plastic: Resists wear and maintains a sleek look.
- Tool-Free Installation: No modifications required.
- Sleek Design: Black/silver finish enhances your car’s interior.
Reverse Camera with Boot Latch Button for Volkswagen Virtus, Taigun (Boot Latch size 111mm)
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
D4S D4R HID to LED Conversion Kit (Plug and Play)
The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.
- High Brightness: 15000LM/Pair for superior illumination
- Easy Installation: Plug & Play, no modifications needed
- Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
- Durable: Lifespan over 50,000 hours, IP68 waterproof
- Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets
Important: Works with stock HID Ballast only. Ensure ballast is in working condition.
Cruise Control Wiring Harness for Volkswagen Skoda Cars (PQ25)
PQ25 Cruise Control Harness – Complete wiring solution for retrofitting cruise control to VW Polo, Vento, Ameo, Jetta, and Skoda Fabia, Rapid. Requires compatible combination switch (6RA 953 513G) and BCM 6R0 937 087 or higher.
- Vehicle Platform: PQ25 (VW, Skoda)
- Required BCM: 6R0 937 087 or higher
- Compatible Switch: 6R0 953 521C/6RA 953 513G/6RA 953 513G
- Functions: SET, ACCELERATE, DECELERATE, RESUME
- Coding Required: VCDS / Diagnostic interface 38772
WARNING: We are supplying only the required part. Installation support or technical guidance is not included. Any information provided in this post is intended solely for reference purposes. It is the customer’s responsibility to verify compatibility, required tools, installation procedure, and correct fitment before proceeding.
OBD II Extension Cable Angled Connector, 30 CM
The 30 CM OBD II Extension Cable offers effortless connectivity for diagnostic tools and GPS trackers. Its flat ribbon design and 90-degree angle ensure durability and flexibility for tight installations.
- 16-pin male-to-female connector for OBD II devices.
- Flat, ribbon-like cable for easy routing.
- Supports all OBD II protocols, including CAN.
- 90-degree angle reduces wear on ports and tools.
- Compact 30 CM length perfect for tight spaces.
TE Connectivity 1534334-1 Crimp Terminal for VAG BCM J519 T73A T73C Connector Pins
TE Connectivity 1534334-1 – Genuine AMP MCP 1.5K female receptacle terminal. Designed for 1.5 mm² wire. Used in VAG BCM J519 73-pin connectors (pins 64, 65, 67–72) for lighting circuits.
- Part Number: 1534334-1
- Type: Receptacle (Female)
- Wire Size: 1.5 mm² (15-17 AWG)
- Current Rating: 12–13A
- Application: BCM J519 T73a and T73c connectors
Grey Prop Holder Mini 4 Pro
Protect your drone's propellers and sensors with this specialized Propeller Holder for DJI Mini 4 Pro. Featuring an adjustable silicone strap and quick-release design, it ensures secure storage and transport.
- Adjustable Fit: Silicone strap accommodates propeller variations.
- Sensor Protection: Shields obstacle avoidance and filler lights.
- Quick-Release: Effortless installation and removal.
- Compact Design: Easy to carry without added bulk.
- Compatibility: Designed exclusively for DJI Mini 4 Pro.
10 x Red T-Tap Connectors
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
Wireless Android Auto Apple CarPlay Adapter
Easily convert your car's wired CarPlay/Android Auto into the wireless carplay & android auto with this 2-IN-1 Mini USB Dongle Adapter. Plug & play design with automatic connection and compatibility with most car models.
- 2-IN-1 Functionality: Converts factory-wired CarPlay & Android Auto to wireless.
- Flushed USB: No more protuding dongle, flushed design allow concealing, reduces accidental damages.
- Effortless Installation: Simple plug & play design, no additional apps or drivers needed.
- Wide Compatibility: Works with over 95% of cars equipped with factory-wired CarPlay & Android Auto.
- Seamless Experience: Automatic wireless connection after initial setup.
- FOTA Online Updates: Supports firmware updates via FOTA for continuous improvements.
Lanyard for RC-N1, 2, 3...
Keep your DJI RC-N1, RC-N2, or RC-N3 remote controller secure with this double mounting point lanyard for DJI RC. Designed for stability and comfort, it features adjustable length and durable nylon construction.
- Double Mounting Points: Improves stability and reduces neck strain.
- Adjustable Length: Fits users of different heights (40-67.5 cm).
- Lightweight Nylon: Soft, breathable, and durable for all-day comfort.
- Compatibility: Works with DJI RC-N1, RC-N2, RC-N3, and RC-N1C.
Lanyard for DJI RC2/RC1/RC Pro Smart Remote Controllers
Upgrade your drone setup with the DJI Smart RC Neck Strap Lanyard. Featuring adjustable length and universal compatibility, it ensures hands-free convenience and secure controller handling for DJI Mini 4 Pro, Air 3, and Mavic 3.
- Adjustable Length: 76 cm to 140 cm for a customized fit.
- Premium Build: Silk nylon and stainless steel for durability.
- Universal Compatibility: Fits DJI Smart RC, RC2, and RC Pro.
- C-Type Ring: Easy storage without disassembly.
- Lightweight Design: Reduces neck strain during long flights.
RS3 3-Inch Bi-LED Dual Laser Fog Projector – White/Tri Color, IP65 Waterproof (Cars and Bikes)
Enhance nighttime driving safety with the RS3 3-Inch Bi-LED Dual Laser Fog Projector. Featuring dual lasers, a 6000K Daylight White beam, and IP65 waterproofing, it’s built for unmatched visibility and durability.
- Multi-Color Options: Chose from ONLY white or Tri-Color options to fit your requirement.
- Dual Laser Spotlights: Precision beams for long-range visibility.
- Indian Road Legal: Right-hand or Flat Cut-out drive beam pattern compliant with regulations.
- Universal Fit: Fits cars and bikes with 3-inch fog lamp assemblies.
- IP65 Rated: Waterproof and dustproof for all weather.
DJI RC Premium Lanyard
Keep your DJI controller secure and comfortable with the Premium Neck Strap. Designed for DJI RC, RC2, and RC Pro, this adjustable lanyard reduces hand fatigue and ensures worry-free flying.
- Adjustable Length: Customizable from 125 to 160 cm.
- Secure Hook Buckle: Zinc alloy clasp for reliable attachment.
- Comfortable Design: Soft nylon webbing and PU suede.
- Easy Installation: Includes screws with silicone gaskets.
- Wide Compatibility: Works with DJI RC, RC2, RC Pro, and more.
Latest Updates, News & Articles
Catch up with whats new and trending.
Motor Accessories
Auto Parts
Connectors & Tools
Vehicle Electronics
Headlights
Internal & External Lights
Stereo & Displays
Drone Accessories
Drone Parts