Filter by brand
- BRDRC 4
DurvientDurvient 115- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 1
- Volkswagen 17
VW (Red) RCD 360 Pro II
Important: The VW RCD model is ONLY available for "PRE-ORDER" and will take about 25-30 days from the order date.
We recommend upgrading to our advanced Android head unit instead:
7" Android Car Stereo for Volkswagen / Skoda
.
W21W T20 DRL White
Original price was: ₹1,750.00.₹1,349.00Current price is: ₹1,349.00.Set of 2
Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
Door Trim Ciip for VW Skoda Part no. 3CN868243
Original price was: ₹600.00.₹449.00Current price is: ₹449.00.Pack of 10
Door Trim Clip Panel Retainer (Part no. 3CN868243) For VW, Audi, Skoda
- OEM Fit: Direct replacement for 3CN868243 on Volkswagen, Skoda, and Audi.
- Durable Nylon Construction: Flexible, wear-resistant for daily use.
- Integrated Sealer: Improves grip and reduces vibration or rattle.
- Easy Install: Push-fit design suitable for 8mm holes - no special tools needed.
- Pack Includes: 10 clips for front/rear door or quarter panel trim.
50 x Green Heat Shrinking Sleeves
Original price was: ₹800.00.₹589.00Current price is: ₹589.00.Packs
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
OEM Dual Tone Horn Set for Volkswagen Skoda Audi
OEM Dual Tone Horn Set - Direct replacement for Audi, Volkswagen, and Skoda vehicles. Features high and low tone discs with pre-attached mounting bracket.
- Complete Set: High + low tone horns included
- Wide Compatibility: Fits Virtus, Slavia, Kylaq, Taigun, Polo, Rapid, Octavia, A3, A4, etc.
- Durable Build: IP67 waterproof, salt spray tested
- Easy Installation: Metal bracket pre-attached
10A Micro Fuse (Pack of 10)
₹229.00Pack of 10
Upgrade your vehicle’s electrical protection with the Micro Fuse APS LP Low Profile Fuse Kit. Compact, durable, and color-coded, these fuses are ideal for modern vehicles and marine systems.
- Low-Profile Design: Fits tight spaces in fuse panels.
- Wide Voltage Range: Compatible with 9V-32V systems.
- Durable Construction: Zinc terminals and heat-resistant housing.
- Color-Coded: Quick identification of amp ratings.
- Versatile Use: Cars, trucks, SUVs, and boats.
9453F Propeller Blades for DJI Mavic 3 Classic, Cine, Pro Cine
Optimize your DJI Mavic 3’s flight experience with the 9453F DJI Mavic 3 Blades Low-Noise Propellers. Designed for stability and reduced noise, these vibrant orange blades ensure smooth, efficient flights.
- Low-Noise Performance: Aerodynamic design for quieter operation.
- Quick-Release: Tool-free installation in seconds.
- Durable Material: Polycarbonate construction resists wear.
- High Visibility: Orange tips for easy tracking.
- Universal Fit: Compatible with all Mavic 3 Series drones.
150W D5S D Series HID to LED Kit 4300K Warm White
⚠️ D5S HID to LED Conversion Notice
This product is a D-Series LED replacement for D5S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Skoda (Green) RCD 360 Pro II
Important: The Skoda RCD model has been discontinued and is no longer available.
We recommend upgrading to our advanced Android head unit instead:
7" Android Car Stereo for Volkswagen / Skoda
.
Super Bright 10 LED T10 White
Replace dim halogens with these T10 LED bulbs for brighter cabin, license plate, or trunk lighting. 34mm size, 6000K white, and plug-and-play installation.
- 360° Illumination: 10 LEDs for uniform brightness.
- Canbus-Compatible: No error codes in most vehicles.
- Durable Build: Shockproof and vibration-resistant.
- Easy Install: Direct replacement for halogen bulbs.
- Wide Fitment: Compatible with T10, W5W, W10W Sockets.
150W H1 6000K White
Original price was: ₹7,000.00.₹4,399.00Current price is: ₹4,399.00.Pair
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
16-12 AWG In-Line Fuse Holder with Regular Fuse
Protect your electrical circuits with the Waterproof In-Line Fuse Holder. Featuring a 16 AWG wire and a 15A ATC/ATO blade fuse, this durable fuse holder is perfect for cars, boats, and industrial applications.
- Waterproof Design: Tight-fitting lid prevents water and dust ingress.
- 16 AWG Wire: Heavy-duty red wire for reliable connections.
- 15A Fuse Included: Protects circuits from overloading.
- Wide Compatibility: Works with ATC/ATO blade fuses (1A-15A).
- Easy Installation: Simple loop design for quick setup.
130W H4, HS1, H19 6000K
Original price was: ₹6,500.00.₹3,499.00Current price is: ₹3,499.00.Pair
130 Watt High-Performance LED Headlight for cars and bikes offer high brightness, 1:1 halogen compatibility, and a Canbus error-free driver for seamless installation. Perfect for all weather conditions!
- High Performance Series High Powered LED Headlight Bulb Fog Lamp Cornering LampBulbs for Cars and Bikes
- 1:1 design compared to halogen. NO Blindspot, NO scattered beam
- Available in 6000K White 120~130W/pair (60~65W per bulb) power consumption Heavy duty 3570 LED Chips
- In line canbus error free LED driver for highend cars. Suitable with 99% of the cars on the road
- Low profile and Plug and Play, no modification needed
Micro Fuse APS LP Low Profile Fuse Kit – Compact Blade Fuses for Cars, Trucks, and Marine Applications
₹229.00Pack of 10
Select options
This product has multiple variants. The options may be chosen on the product page
Upgrade your vehicle’s electrical protection with the Micro Fuse APS LP Low Profile Fuse Kit. Compact, durable, and color-coded, these fuses are ideal for modern vehicles and marine systems.
- Low-Profile Design: Fits tight spaces in fuse panels.
- Wide Voltage Range: Compatible with 9V-32V systems.
- Durable Construction: Zinc terminals and heat-resistant housing.
- Color-Coded: Quick identification of amp ratings.
- Versatile Use: Cars, trucks, SUVs, and boats.
PQ ISO to Quadlock Cable (without Tech Support)
Original price was: ₹3,600.00.₹2,199.00Current price is: ₹2,199.00.Pc
150W D4S/D4R D Series HID to LED Kit 4300K Warm White
⚠️ D4S/D4R HID to LED Conversion Notice
This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
