Filter by brand
- BRDRC 4
DurvientDurvient 104- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 4
- TE Connectivity 3
- Volkswagen 15
12V DC Power Relay Filter Rearview Backup Camera Rectifier
Fix unstable power issues in your backup camera with 12V DC Power Relay Filter Rearview Backup Camera Rectifier. Stabilizes voltage to prevent flickering or black screens during reversing.
- Stable 12V Output: Eliminates screen distortion.
- Universal Fit: Works with most 12V backup cameras.
- Durable & Waterproof: Built for long-term use.
- Tool-Free Installation: Connects to reversing light and camera in minutes.
New & Improved P21/5W BAY15D Canbus Error Free 1157 LED for Brakes and Parking Lights
Bright, energy-efficient, and error-free P21/5W BAY15D LED for brakes and parking lights, offering 360-degree illumination for enhanced visibility.
- Canbus Error-Free P21/5W BAY15D LED Bulb
- 44 High-Quality 3030 LED Chips
- Energy Efficient with Plug-and-Play Installation
- Commonly used in Maruti Suzuki, Honda, Kia, Hyundai, etc.
- 360-Degree Brightness for Dual-Function Brake and Tail/Parking
Anti Glare IRVM (Mount no. 67) with Reverse Camera & DIsplay for Volkswagen Skoda with Rain Sensor
Lanyard for RC-N1, 2, 3...
Keep your DJI RC-N1, RC-N2, or RC-N3 remote controller secure with this double mounting point lanyard for DJI RC. Designed for stability and comfort, it features adjustable length and durable nylon construction.
- Double Mounting Points: Improves stability and reduces neck strain.
- Adjustable Length: Fits users of different heights (40-67.5 cm).
- Lightweight Nylon: Soft, breathable, and durable for all-day comfort.
- Compatibility: Works with DJI RC-N1, RC-N2, RC-N3, and RC-N1C.
Auto Dimming IRVM for Tata Indica, Indigo, Indigo Marina, Bolt, Manza
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
RS3 Fog Projector (Only Tri Color with White Laser)
Enhance nighttime driving safety with the RS3 3-Inch Bi-LED Dual Laser Fog Projector. Featuring dual lasers, a 6000K Daylight White beam, and IP65 waterproofing, it’s built for unmatched visibility and durability.
- Multi-Color Options: Chose from ONLY white or Tri-Color options to fit your requirement.
- Dual Laser Spotlights: Precision beams for long-range visibility.
- Indian Road Legal: Right-hand or Flat Cut-out drive beam pattern compliant with regulations.
- Universal Fit: Fits cars and bikes with 3-inch fog lamp assemblies.
- IP65 Rated: Waterproof and dustproof for all weather.
Male & Female Connector Part no. 3B0 972 712, 3B0 972 702
Intelligent LED Headlight Canbus Decoder Error-Free, Anti-Flicker for H7/H8/H11/HB3/H4/H18/H19 Headlights
Resolve LED headlight errors and flickering with the Intelligent LED Headlight Canbus Decoder. Compatible with H7/H18, H8, H11, HB3, and H4/H19 bulbs, this plug-and-play decoder ensures error-free performance for your vehicle’s lighting system.
- Error-Free Operation: Eliminates dashboard warnings and flickering.
- Wide Compatibility: Supports H7/H18, H8, H11, HB3, H4/H19/HS1, and cross-compatible bulb types.
- High Power Handling: Up to 60W and 5A current.
- Plug-and-Play: No tools or modifications needed.
- Durable Build: High-quality plastic and copper components.
Folding Landing Gear for DJI Mini 5 Pro
Foldable Extended Landing Gear for DJI Mini 5 Pro – Raises your drone by 25mm to keep it clean and protected on rough ground. Snaps on without tools and folds for easy storage.
- 25mm Lift: Keeps camera and sensors away from dirt, sand, and water
- Tool-Free: Quick-release snap-on design
- Lightweight: Only 24g – minimal impact on flight
- Foldable: Compact for travel and storage
Door Trim Ciip for VW Skoda Part no. 3CN868243
Door Trim Clip Panel Retainer (Part no. 3CN868243) For VW, Audi, Skoda
- OEM Fit: Direct replacement for 3CN868243 on Volkswagen, Skoda, and Audi.
- Durable Nylon Construction: Flexible, wear-resistant for daily use.
- Integrated Sealer: Improves grip and reduces vibration or rattle.
- Easy Install: Push-fit design suitable for 8mm holes - no special tools needed.
- Pack Includes: 10 clips for front/rear door or quarter panel trim.
6030F Propeller Blades for DJI Mini 4 Pro
Upgrade your DJI Mini 4 Pro Bladeswith durable polycarbonate blades. This complete kit ensures balanced flight, reduced noise, and easy installation.
- Polycarbonate Build: Lightweight and vibration-resistant.
- Full Set: Includes 8 blades, screws, and a screwdriver.
- Exclusive Compatibility: For DJI Mini 4 Pro only.
- Visibility: Orange-tipped blades for easy tracking.
- Critical Note: Replace all four blades together.
Auto Dimming IRVM for Kia Sonet, Seltos, Syros
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
PQ ISO to Quadlock Cable (without Tech Support)
ISO to MQB Quadlock Connector Cable For Plug-and-Play Upgrade for RCD360 Pro, Discover Media & MIB Systems
Upgrade your Volkswagen’s infotainment system effortlessly with the ISO to MQB Quadlock Connector Cable. This plug-and-play adapter ensures seamless compatibility with RCD360 Pro, Discover Media, and MIB systems.
- Plug-and-Play: No wiring modifications needed.
- High Compatibility: Supports RCD360 Pro, Discover Media, and MIB.
- Durable Build: ABS housing and copper wiring for reliability.
- Extendable Canbus: Flexible installation for complex setups.
- Lossless Signal: Crisp audio and stable connectivity.
Easy to Use T-Tap Connector Quick Splice Electrical Terminals for Automotive, Marine, and Home Wiring
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
DJI Mini 5 Pro Propeller Blades (Pack of 4)
Low-noise blades for DJI Mini 5 Pro Propellers - 6028F blades for smooth, stable flight.
-
- Made for Mini 5 Pro: Sized and balanced for the Mini 5 Pro drone.
- Low noise: Blade profile helps reduce flight noise.
- Durable plastic: Tough yet flexible material resists cracks.
- Quick-release: Tool-free install and removal.
- Full set: 4 blades, enough for one drone.
