Filter by brand
- BRDRC 4
DurvientDurvient 104- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 4
- TE Connectivity 3
- Volkswagen 15
Auto Dimming IRVM for Mahindra TUV300, KUV100, Nuvosport, Quanto, Xylo
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
160W App Controlled Bluetooth Smart LED Headlight Bulb Kit for Cars (Tri Color 3000K/4300K/6000K)
Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.
- High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
- Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
- Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
- Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
- Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.
1 x Mini Fuse Tap
Power your car accessories safely with the Mini ATM/APM Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.
- Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
- High Capacity: Handles up to 32V and 30A for robust performance.
- Plug-and-Play: Includes a complimentary fuse for quick installation.
- Non-Invasive Design: No cutting or splicing required.
- Compatibility: Works with Mini (ATM/APM) blade fuses.
RCD340 360 RCD Stereo Frame for Skoda Yeti, Laura, Octavia, Superb – Upgrade to RCD330/RCD340/RCD360/RCD880
Upgrade your Skoda’s stereo system with the Double Din Facia RCD Stereo Frame. Designed for Skoda Yeti, Laura, and Octavia models, this facia ensures a seamless fit for RCD330, RCD340, RCD360, and RCD880 head units.
- Compatibility: Upgrades RCD510/Swing/Bolero to modern multimedia systems.
- Perfect Fit: Seamlessly integrates with your dashboard.
- Durable ABS Plastic: Resists wear and maintains a sleek look.
- Tool-Free Installation: No modifications required.
- Sleek Design: Black/silver finish enhances your car’s interior.
30A Regular/Standard Fuse (Pack of 10)
Protect your vehicle’s electrical system with the Regular Standard Fuse Kit. Featuring ATC, ATO, and APR fuses in a range of amperages, this kit is perfect for European cars and general-purpose applications.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy identification of fuse ratings.
- Durable Build: Zinc alloy terminals and non-conductive plastic.
- Wide Compatibility: Suitable for cars, trucks, SUVs, and boats.
- Easy Installation: Standard blade design for quick replacement.
Reverse Camera with Boot Latch Button for Skoda Slavia, Kushaq, Kylaq and more
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
144 LED Amber BA15S
Upgrade your vehicle’s lighting with the P21W BA15S 1156 LED Bulb. Featuring 144 SMD LEDs and error-free operation, it’s ideal for brakes, reverse lights, and indicators.
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- 21-25W Efficiency: Brighter than halogen, prevents dashboard errors.
- Error-Free Design: Built-in resistor prevents hyper-flashing.
- Dual Colors: White for reverse lights, Amber for brakes/indicators.
- Plug-and-Play: Direct replacement for halogen bulbs.
Auto Dimming IRVM for Jeep Compass (pre-2017 with IRVM on windshield)
160W D2S/D2R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Auto Dimming IRVM for Maruti Swift (2017 onwards)
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Easy to Use Regular Standard Fuse Kit – ATC/ATO/APR Fuses for European Cars (5A-30A, Color-Coded)
Protect your vehicle’s electrical system with the Regular Standard Fuse Kit. Featuring ATC, ATO, and APR fuses in a range of amperages, this kit is perfect for European cars and general-purpose applications.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy identification of fuse ratings.
- Durable Build: Zinc alloy terminals and non-conductive plastic.
- Wide Compatibility: Suitable for cars, trucks, SUVs, and boats.
- Easy Installation: Standard blade design for quick replacement.
Auto Dimming IRVM for Volkswagen Jetta (MK6, MK6.5)
100 x Blue Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
R23 160W H7 H18 4300K Warm White
Plug and Play Automatic Headlight Switch For VW Polo, Vento, Ameo, Skoda Rapid and More
Upgrade your Volkswagen or Skoda with the Automatic Headlight Switch. Featuring a high-precision light sensor and plug-and-play installation, it automates headlight operation for enhanced convenience and safety.
- Plug-and-Play: No wiring modifications required.
- Light Sensor: Automatically adjusts headlights based on ambient light.
- Three Modes: Tunnel (1s), Normal (3s), and Delay (5s).
- Durable Build: High-quality ABS plastic for longevity.
- Compatible Models: VW Polo, Vento, Ameo, Skoda Rapid, and more.
OEM 2-Pin Connector Part No. 3B0972702 & 3B0972712 For Audi, VW, Skoda
VW 2 Pin connector part numbers 3B0972702 and 3B0972712. Restore your VAG vehicle’s electrical systems with the OEM 2-Pin 1.5mm Connector. Designed for Audi, VW, Skoda, and Seat, this durable plug ensures reliable connections for sensors, lights, and more.
- OEM Fit: Replaces part numbers 3B0972702 and 3B0972712.
- Tin-Plated Copper: Resists oxidation for stable conductivity.
- Easy Installation: Crimp or solder-free setup.
- Wide Application: Sensors, lights, speakers, injectors.
- 14V/10A Rating: Safe for critical electrical systems.
