Filter by brand
- BRDRC 4
DurvientDurvient 104- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 4
- TE Connectivity 3
- Volkswagen 15
160W HID to LED D-Series Headlight Kit – Warm White 4300K
In stock
160W D-Series HID to LED conversion – CSP 4070 LEDs in 4300K Warm White for OEM HID projector/reflector housings.
-
- D-Series fit: Suits D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, D8S housings.
- Direct wire: Red (+) and black (-) wires connect to the headlight power feed; ballast must be bypassed.
- High output: 160W per pair (80W each) with focused beam pattern.
- Cooling: Dual copper tubes and turbo fan for thermal control.
Anti-Glare ORVM Mirror Glass for Jeep Compass (17-23)
In stock
Bright Miniature Design W5W W10W T10 Flicker Error-Free Canbus LED Bulb for Indicators and Lighting
In stock
DJI RC2 Hard Shell Cover
In stock
Protect and enhance your DJI Smart RC2 Controller with the 2-in-1 Protective Hard Cover Sunshade. Compatible with DJI Air 3S, Air 3, Flip, Mini 4 Pro, and Mini 3 Pro, this accessory combines durable protection with adjustable sunshade functionality for optimal visibility in all conditions.
- 2-in-1 Design: Combines hard shell protection and sunshade functionality in one accessory.
- Thumb Stick Convenience: No need to remove thumb sticks for storage or transport.
- Durable Construction: Hard plastic casing resists scratches, dust, and accidental damage.
- Adjustable Sunshade: Freely adjustable from 0-180° for optimal visibility in any lighting condition.
- Perfect Compatibility: Fits DJI Smart RC2 Cover for Air 3S, Air 3, Flip, Mini 4 Pro, and Mini 3 Pro drones.
Door Trim Ciip for VW Polo/Vento/Jetta Skoda Rapid/Fabia Laura/Superb Part no. 7L6 868 243
In stock
Door Trim Clip Panel Retainer (Part no. 7L6868243) For VW, Audi, Skoda
- OEM Fit: Direct replacement for 7L6 868 243 on Volkswagen, Skoda, and Audi.
- Durable Nylon Construction: Flexible, wear-resistant for daily use.
- Integrated Sealer: Improves grip and reduces vibration or rattle.
- Easy Install: Push-fit design suitable for 8mm holes - no special tools needed.
- Pack Includes: 10 clips for front/rear door or quarter panel trim.
Anti-Glare IRVM Rear View Mirror Reverse Camera Kit
In stock
Upgrade your vehicle’s rearview mirror with the 10.5" Anti-Glare IRVM. Featuring a 4.3" LCD screen and included reverse camera, this mirror enhances safety and visibility for all drivers.
- Anti-Glare Mirror: 10.5" rearview mirror with 4mm thick glass.
- Built-In LCD Screen: Displays reverse camera footage automatically.
- Automatic Brightness: Adjusts based on ambient light conditions.
- Dual Video Inputs: Connect GPS, DVD, or additional cameras.
- Universal Fit: Compatible with most vehicles. Select mount applicable to your car.
Versatile H7 LED Adapter Skoda Slavia Kushaq – Perfect Fit for Skoda, Ford, Citroen More
In stock
Easily upgrade your headlights with this durable ABS Mount h7 led adapter for Skoda Slavia, Kushaq headlights. Designed for Skoda Slavia, Kushaq, and Ford Citroen, it ensures a secure fit without modifications. Please verify compatibility before purchasing.
- Universal Fit: Compatible with Skoda Slavia, Kushaq, Ford Citroen, and other vehicles with matching headlight mounting.
- Durable Construction: Made from high-grade ABS plastic, ensuring heat and corrosion resistance.
- Secure Installation: Locks H7 LED bulbs firmly into your car’s stock headlight housing.
- No Modifications Needed: Install LED HID bulbs without damaging the original socket.
- Important Compatibility Check: Verify headlight socket before purchasing.
50 x Blue Heat Shrinking Sleeves
In stock
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
Lens Hood Gimbal Protector for DJI Mini 4 Pro
In stock
Protect your drone's lens and gimbal with the DJI Mini 4 Pro Lens Hood Anti-glare Sunshade. This lightweight, precision-designed accessory blocks stray light, enhances aerial photography, and adds 8mm of belly height for extra protection.
- Anti-Glare: Blocks stray light for clearer shots.
- Increased Protection: Adds 8mm belly height for gimbal and lens safety.
- Precision Fit: Designed for DJI Mini 4 Pro without affecting camera rotation.
- Lightweight: Weighs only 14g for portability.
- Quick Installation: One-step setup for hassle-free use.
TE 1534334-1 Pin for BCM J519 MQB Platform T73 Terminal (Pack of 8)
In stock
TE Connectivity 1534334-1 – Genuine AMP MCP 1.5K female receptacle terminal. Designed for 1.5 mm² wire. Used in VAG BCM J519 73-pin connectors (pins 64, 65, 67–72) for lighting circuits.
- Part Number: 1534334-1
- Type: Receptacle (Female)
- Wire Size: 1.5 mm² (15-17 AWG)
- Current Rating: 12–13A
- Application: BCM J519 T73a and T73c connectors
Auto Dimming IRVM for Maruti Swift (2017 onwards)
In stock
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Intelligent LED Headlight Canbus Decoder Error-Free, Anti-Flicker for H7/H8/H11/HB3/H4/H18/H19 Headlights
In stock
Resolve LED headlight errors and flickering with the Intelligent LED Headlight Canbus Decoder. Compatible with H7/H18, H8, H11, HB3, and H4/H19 bulbs, this plug-and-play decoder ensures error-free performance for your vehicle’s lighting system.
- Error-Free Operation: Eliminates dashboard warnings and flickering.
- Wide Compatibility: Supports H7/H18, H8, H11, HB3, H4/H19/HS1, and cross-compatible bulb types.
- High Power Handling: Up to 60W and 5A current.
- Plug-and-Play: No tools or modifications needed.
- Durable Build: High-quality plastic and copper components.
TE 962883-1 & TE 964274-2 Crimp Terminal Pair (Male & Female) – 2.8×0.8mm Automotive Connectors for VW, BMW, Audi, Honda
In stock
Upgrade your automotive wiring with the TE 962883-1 & TE 964274-2 Crimp Terminal Pair. This male and female set ensures secure, OE-standard connections for VW, Audi, BMW, and Honda vehicles.
- Dual Variations: Male and female terminals sold separately (10 pieces per pack).
- OE Quality: Precision fit for reliable electrical connections.
- 24A Rating: Handles low-power systems like audio and lighting.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Honda models.
- Compact Design: 2.8x0.8mm tab for exact fitment.
2 x Footwell Lamp Bracket
In stock
Enhance your Volkswagen, Skoda, or Audi’s interior with the OEM Footwell Light Holder for VAG models. Designed for seamless installation in various locations, this holder fits perfectly, providing secure placement for your vehicle’s lighting needs.
- OEM bracket for easy footwell light installation in VAG vehicles
- Compatible with VAG light assemblies: 3B0 972 712, 3TD 947 565
- Fits under driver, co-driver seats, and boot for versatile lighting
- Durable ABS plastic construction, designed for long-lasting use
- Ideal for Volkswagen, Skoda, and Audi models
H19 Dual Lens Mini Projector with Laser Spotlight
In stock
Mini Fuse Tap ATM APM Upto 30A Fuse Tap – Splice Free Accessory Connector In European Cars
In stock
Power your car accessories safely with the Mini ATM/APM Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.
- Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
- High Capacity: Handles up to 32V and 30A for robust performance.
- Plug-and-Play: Includes a complimentary fuse for quick installation.
- Non-Invasive Design: No cutting or splicing required.
- Compatibility: Works with Mini (ATM/APM) blade fuses.
