Filter by brand
- BRDRC 4
DurvientDurvient 115- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 1
- Volkswagen 17
50 x Blue T-Tap Connectors
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
Reverse Camera for Small Boot Latch For Vento/Rapid (big connector, retrofitted)
150W D4S/D4R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Green Car Door Reflective Sticker
- Enhanced Safety: Alerts drivers to open car doors.
- Multicolor Options: Available in Red, White, Yellow, and Green.
- Easy Installation: Peel-and-stick adhesive for quick setup.
- Durable Material: High-quality reflective plastic for longevity.
- Complete Coverage: Pack of 4 stickers for all car doors.
16-12 AWG In-Line Fuse Holder with Regular Fuse
- Waterproof Design: Tight-fitting lid prevents water and dust ingress.
- 16 AWG Wire: Heavy-duty red wire for reliable connections.
- 15A Fuse Included: Protects circuits from overloading.
- Wide Compatibility: Works with ATC/ATO blade fuses (1A-15A).
- Easy Installation: Simple loop design for quick setup.
PS24W PSY24W PSX24W Switchback LED Indicator + DRL
Fits perfectly with: Tata Hexa, Jeep Compass, Jeep Meridian, and certain Audi models (please verify your vehicle specifications first).
Not compatible with Hyundai Venue. If you own a Hyundai Venue, please select the PY21W option instead.
Rear Footwell Kit (2x Lamp) for Virtus Kushaq Kylaq Taigun
Black – Virtus, Slavia, Taigun, Kushaq, Golf, Octavia
OBD II Extension Cable Angled Connector, 30 CM
- 16-pin male-to-female connector for OBD II devices.
- Flat, ribbon-like cable for easy routing.
- Supports all OBD II protocols, including CAN.
- 90-degree angle reduces wear on ports and tools.
- Compact 30 CM length perfect for tight spaces.
Set of 2 PY21W BAU15S LED
Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.
- No Hyperflash: Built-in resistors prevent rapid blinking.
- No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality aviation grade aluminum for longevity.
- Wide Compatibility: Fits BAU15S and PY21W sockets.
7" Android Stereo for Volkswagen Skoda Cars (4GB+64GB)
- Android 13: 4GB RAM + 64GB ROM for fast performance.
- Wireless Connectivity: Wired and Wireless CarPlay, Android Auto, BT 5.4.
- OEM Fit: Retains steering controls and factory amp.
- Backup Camera Ready: 1080P AHD input (not included, can be bought here).
Reverse Camera for Octavia MK2, Laura, Yeti, Fabia, A1, A3, A4 (small connector)
Bright 35 LED Cross Pin BAU15S PY21W LED Turn Signal Canbus Error-Free, No Hyperflash
Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.
- No Hyperflash: Built-in resistors prevent rapid blinking.
- No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality aviation grade aluminum for longevity.
- Wide Compatibility: Fits BAU15S and PY21W sockets.
Red RC1 Silicone Cover
- Premium Protection: Shields from dust, dirt, and drops.
- Non-Slip Grip: Ensures a secure hold in all conditions.
- Lightweight Design: Easy to carry and clean.
- Precision Fit: Full access to buttons and ports.
- Compatibility: DJI RC1 (Air 2S, Mini 3, Mini 3 Pro).
