Filter by brand
- BRDRC 4
DurvientDurvient 104- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 4
- TE Connectivity 3
- Volkswagen 15
Bright P21W BA15S 1156 LED Bulb – Flat Pin 180° for Brakes, Reverse, Indicators
In stock
Upgrade your vehicle’s lighting with the P21W BA15S 1156 LED Bulb. Featuring 144 SMD LEDs and error-free operation, it’s ideal for brakes, reverse lights, and indicators.
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- 21-25W Efficiency: Brighter than halogen, prevents dashboard errors.
- Error-Free Design: Built-in resistor prevents hyper-flashing.
- Dual Colors: White for reverse lights, Amber for brakes/indicators.
- Plug-and-Play: Direct replacement for halogen bulbs.
Cruise Control Wiring Harness for Volkswagen Skoda Cars (PQ25)
In stock
PQ25 Cruise Control Harness – Complete wiring solution for retrofitting cruise control to VW Polo, Vento, Ameo, Jetta, and Skoda Fabia, Rapid. Requires compatible combination switch (6RA 953 513G) and BCM 6R0 937 087 or higher.
- Vehicle Platform: PQ25 (VW, Skoda)
- Required BCM: 6R0 937 087 or higher
- Compatible Switch: 6R0 953 521C/6RA 953 513G/6RA 953 513G
- Functions: SET, ACCELERATE, DECELERATE, RESUME
- Coding Required: VCDS / Diagnostic interface 38772
WARNING: We are supplying only the required part. Installation support or technical guidance is not included. Any information provided in this post is intended solely for reference purposes. It is the customer’s responsibility to verify compatibility, required tools, installation procedure, and correct fitment before proceeding.
9W Red T15 W16W for Tail/Parking Light
In stock
Upgrade your vehicle’s lighting with the T15 W16W/WY16W Canbus Error-Free LED Bulb. Featuring 48 advanced 2016 SMD LEDs, it delivers bright, energy-efficient illumination for turn signals, reverse lights, and parking lights.
- 48x 2016 SMD LEDs: Brighter and more efficient than traditional LEDs.
- Canbus Error-Free: No hyperflashing or dashboard warnings.
- 360° Illumination: Ensures visibility from all angles.
- Plug-and-Play: Direct replacement for T15 W16W/WY16W halogen bulbs.
- Durable Cooling: Thick aluminum heat sink for extended lifespan.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
Easy to Use T-Tap Connector Quick Splice Electrical Terminals for Automotive, Marine, and Home Wiring
In stock
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
10 x Yellow T-Tap Connector
In stock
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
H7/H18 Canbus Decoder
In stock
Resolve LED headlight errors and flickering with the Intelligent LED Headlight Canbus Decoder. Compatible with H7/H18, H8, H11, HB3, and H4/H19 bulbs, this plug-and-play decoder ensures error-free performance for your vehicle’s lighting system.
- Error-Free Operation: Eliminates dashboard warnings and flickering.
- Wide Compatibility: Supports H7/H18, H8, H11, HB3, H4/H19/HS1, and cross-compatible bulb types.
- High Power Handling: Up to 60W and 5A current.
- Plug-and-Play: No tools or modifications needed.
- Durable Build: High-quality plastic and copper components.
Waterproof Heat Shrink Solder Sleeve Connector for Cable Insulation Wire Connector (Different Sizes)
In stock
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
RS3 Fog Projector (Only Tri Color with White Laser)
In stock
Enhance nighttime driving safety with the RS3 3-Inch Bi-LED Dual Laser Fog Projector. Featuring dual lasers, a 6000K Daylight White beam, and IP65 waterproofing, it’s built for unmatched visibility and durability.
- Multi-Color Options: Chose from ONLY white or Tri-Color options to fit your requirement.
- Dual Laser Spotlights: Precision beams for long-range visibility.
- Indian Road Legal: Right-hand or Flat Cut-out drive beam pattern compliant with regulations.
- Universal Fit: Fits cars and bikes with 3-inch fog lamp assemblies.
- IP65 Rated: Waterproof and dustproof for all weather.
Auto Dimming IRVM for Skoda Rapid (No Rain/Light Sensor)
In stock
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
R23 160W H7 H18 4300K Warm White
In stock
Silver – Virtus, Slavia, Taigun, Kushaq, Golf, Octavia
In stock
3 x Micro Fuse Tap
In stock
Power your car accessories safely with the Micro Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.
- Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
- High Capacity: Handles up to 32V and 30A for robust performance.
- Plug-and-Play: Includes a complimentary fuse for quick installation.
- Non-Invasive Design: No cutting or splicing required.
- Compatibility: Works with Mini (ATM/APM) blade fuses.
Dual Color T10/T15 Indicator + DRL LED
In stock
Upgrade to dual color T10 LEDs for turn signals (amber) and DRL/parking lights (white). 400LM output, plug-and-play install.
- 2-in-1 Function: Amber turn + white DRL for motorcycles and scooters.
- Better Safety: Presence of DRL increases vehicle visiblity. Best suited for the vehicles without DRLs from factory.
- Plug & Play: Stock T10/T15 Socket allows plug and play installation without any modifications.
- 3014 SMD Chips: Bright 27 white + 27 amber per LED for better visual and visiblity.
- Aluminum Body: Durable and Effective Heat Dissipation.
- Wide Fit: T10, W5W, W10W sockets.
- Includes: 2 LEDs + 2 Tap connectors for DRL connections.
150W HB4 9006 4300K Warm White
In stock
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
OEM VAG Horn Connectors – Male/Female 4D0 971 992 with 6-inch Wires for Volkswagen, Skoda, Audi
In stock
OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
- OEM Fit: Direct replacement 4D0 971 992 connectors
- Dual Options: Available as male or female connectors
- Pre-Wired: 6-inch harness for easy installation
- High Power: 100W capacity for all horn types
Foldable Landing Gear for DJI Air 3S/Air 3
In stock
Protect your DJI Air 3S and Air 3 drone with the DJI Air 3S Landing Gear Leg Extension. This lightweight ABS accessory increases belly height by 21mm for safe take-offs/landings on uneven terrain, with quick installation and a foldable design.
- 21mm Increased Belly Height: Safeguards gimbal and propellers.
- Foldable Design: Easy to store and transport.
- Quick Installation: No tools required – attach in under 10 seconds.
- Lightweight ABS: Adds only 37g to the drone’s weight.
- Compatibility: Designed for DJI Air 3S and Air 3.
