Filter by brand
- BRDRC 4
DurvientDurvient 115- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 3
- Volkswagen 18
Black RC1 Silicone Cover
Protect your DJI RC1 remote controller with this soft silicone cover for DJI RC1/Smart RC. Designed for DJI Air 2S, Mini 3, and Mini 3 Pro, it offers a snug fit, non-slip grip, and full access to buttons and ports.
- Premium Protection: Shields from dust, dirt, and drops.
- Non-Slip Grip: Ensures a secure hold in all conditions.
- Lightweight Design: Easy to carry and clean.
- Precision Fit: Full access to buttons and ports.
- Compatibility: DJI RC1 (Air 2S, Mini 3, Mini 3 Pro).
OBD II Extension Cable Angled Connector, 30 CM
The 30 CM OBD II Extension Cable offers effortless connectivity for diagnostic tools and GPS trackers. Its flat ribbon design and 90-degree angle ensure durability and flexibility for tight installations.
- 16-pin male-to-female connector for OBD II devices.
- Flat, ribbon-like cable for easy routing.
- Supports all OBD II protocols, including CAN.
- 90-degree angle reduces wear on ports and tools.
- Compact 30 CM length perfect for tight spaces.
Amber P21W BA15S Flat Pin LED
Upgrade your vehicle's lighting with the P21W BA15S 1156 LED Bulb—designed for bright, error-free performance.
- Canbus Error-Free Design: Built-in resistor prevents hyperflashing for seamless operation.
- Energy Efficient: Consumes less than 15W compared to traditional 21W halogen bulbs.
- Bright Illumination: Equipped with 35 premium SMD LED chips for superior lighting performance.
- Plug-and-Play Installation: Matches the size of halogen bulbs for easy, modification-free installation.
- Wide Compatibility: Suitable for brake, reverse, fog, and parking lights in cars, bikes, and trucks.
150W H1 6000K White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
Cruise Control Wiring Harness for Volkswagen Skoda Cars (PQ25)
PQ25 Cruise Control Harness – Complete wiring solution for retrofitting cruise control to VW Polo, Vento, Ameo, Jetta, and Skoda Fabia, Rapid. Requires compatible combination switch (6RA 953 513G) and BCM 6R0 937 087 or higher.
- Vehicle Platform: PQ25 (VW, Skoda)
- Required BCM: 6R0 937 087 or higher
- Compatible Switch: 6R0 953 521C/6RA 953 513G/6RA 953 513G
- Functions: SET, ACCELERATE, DECELERATE, RESUME
- Coding Required: VCDS / Diagnostic interface 38772
WARNING: We are supplying only the required part. Installation support or technical guidance is not included. Any information provided in this post is intended solely for reference purposes. It is the customer’s responsibility to verify compatibility, required tools, installation procedure, and correct fitment before proceeding.
D5S HID to LED Conversion Kit (Plug and Play)
The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.
- High Brightness: 15000LM/Pair for superior illumination
- Easy Installation: Plug & Play, no modifications needed
- Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
- Durable: Lifespan over 50,000 hours, IP68 waterproof
- Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets
Important: Works with stock HID Ballast only. Ensure ballast is in working condition.
D2S D2R HID to LED Conversion Kit (Plug and Play)
The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.
- High Brightness: 15000LM/Pair for superior illumination
- Easy Installation: Plug & Play, no modifications needed
- Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
- Durable: Lifespan over 50,000 hours, IP68 waterproof
- Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets
Important: Works with stock HID Ballast only. Ensure ballast is in working condition.
Motorcycle Fog Lamp Mount Brackets – Adjustable 20-38mm or 38-60mm Aluminum Clamps for Fog Lights, ATV, UTV (Pack of 2)
Universal Motorcycle Fog Lamp Mount, Heavy-duty aluminum clamps for fog lights, spotlights, or LED bars.
- Size Options: Choose 20-38mm or 38-60mm clamps for the perfect round bar fit
- 360° Adjustable: 360° rotatable and adjustable for precise lighting angles,
- Anodized Aluminum: Hard-anodized aluminum alloy resists rust and wear.
- Easy to Install:Easy clamp-on installation with basic tools, no drilling or modification.
- Includes: 2 x brackets, 4 x long screws, 2 x M10 screws, 2 x Spring Washer.
Lanyard for DJI RC-N1/N2/N3
Enjoy hands-free drone control with the Adjustable Lanyard Neck Strap for DJI RC-N1, N2, and N3 controllers. Lightweight and secure, it’s perfect for extended flights.
- Quick Installation: Attaches in seconds with a secure metal clasp.
- Adjustable Length: Customizable from 90cm to 130cm.
- Lightweight Design: Weighs only 20g for minimal interference.
- Universal Compatibility: Works with DJI RC-N1, N2, and N3 controllers.
- Comfortable Material: Soft silk nylon for extended wear.
10 x Green Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
10A Regular/Standard Fuse (Pack of 10)
Protect your vehicle’s electrical system with the Regular Standard Fuse Kit. Featuring ATC, ATO, and APR fuses in a range of amperages, this kit is perfect for European cars and general-purpose applications.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy identification of fuse ratings.
- Durable Build: Zinc alloy terminals and non-conductive plastic.
- Wide Compatibility: Suitable for cars, trucks, SUVs, and boats.
- Easy Installation: Standard blade design for quick replacement.
3 x Micro Fuse Tap
Power your car accessories safely with the Micro Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.
- Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
- High Capacity: Handles up to 32V and 30A for robust performance.
- Plug-and-Play: Includes a complimentary fuse for quick installation.
- Non-Invasive Design: No cutting or splicing required.
- Compatibility: Works with Mini (ATM/APM) blade fuses.
1 x HS1, H4 LED for Motorcycle, Scooter
Upgrade your motorcycle or scooter’s lighting with the High-Performance Headlight LED for Motorcycle, Scooter. Featuring 6000K white light and 24 CSP 3570 chips, it delivers exceptional brightness and reliability for night rides.
- 6000K White Light: Bright, clear illumination for enhanced visibility.
- 24 CSP Chips: Reliable performance for low and high beams.
- Plug-and-Play: Easy installation with HS1, H4, H19, and HB2/9003 connectors.
- Durable Build: Aviation-grade aluminum with heat dissipation.
- Error Prevention: Built-in smart chip prevents bulb-out errors.
Black – Polo, Vento, Ameo, Rapid, Yeti, Superb, Laura, Yeti, Fabia, Jetta
50 x Red Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).