Filter by brand
- BRDRC 4
DurvientDurvient 104- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 4
- TE Connectivity 3
- Volkswagen 15
SIngle to Dual Horn Splitter Harness for Skoda Volkswagen
In stock
Single to Dual Horn Harness - Complete plug-and-play kit to convert your single horn setup to dual horns without cutting factory wires.
- Complete Kit: 1 male + 2 female connectors pre-assembled with 1.2 meter long wiring harness.
- No Modification: Plug-and-play installation.
- Dual Conversion: Converts single connection to dual outputs.
- Compatible with: Skoda Kylaq, Kushaq, Slavia, Rapid. Volkswagen Polo, Taigun, Virtus, Vento etc.
- Connector Type: 4D0 971 992 male and female connectors.
Important Purchase Notice
This is a non-returnable product. Please verify compatibility with your installer, dealer, or electrician before placing the order.
Order only after confirming the correct connector and use case for your vehicle.
1 x Micro Fuse Tap
In stock
Power your car accessories safely with the Micro Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.
- Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
- High Capacity: Handles up to 32V and 30A for robust performance.
- Plug-and-Play: Includes a complimentary fuse for quick installation.
- Non-Invasive Design: No cutting or splicing required.
- Compatibility: Works with Mini (ATM/APM) blade fuses.
Reverse Camera Delay Timer Module
In stock
Fix reverse camera errors on your VW or Skoda with the RCA Delay Timer Module, Relay Camera Filter. This plug-and-play module stabilizes voltage and adds a 10-second delay for seamless compatibility with RCD/MIB systems.
- 10-Second Delay: Keeps camera active post-reverse gear.
- Stable 12V Output: No flickering or blank screens.
- Wide Compatibility: Works with RCD330, MIB, Polo, Vento, Rapid, and more.
- Tool-Free Install: Connects in minutes with standard plugs.
- Durable Design: ABS and copper construction.
Reverse Camera with Boot Latch Button for Volkswagen Ameo (Boot Latch size 111mm)
In stock
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
1 x 10 Watt 10 Ohms Resistor
In stock
10 Watt Resistor solve canbus errors and stabilize electrical loads. Rated for 10W 10 Ohm wirewound aluminum case resistor. Prevent fast blinking in indicator/turn signals for motorcycles and cars with ease. Designed for industrial and automotive-grade performance, it’s durable, efficient, and highly versatile.
- Canbus Error Decoding/Fast Blink Fix: Solves canbus errors and stabilizes electrical loads. Prevents fast blinking in motorcycle and car indicators/turn signals.
- High Performance: 10W power rating, 10 Ohm resistance, and 5% tolerance ensure precision and stability.
- Superior Durability: Sturdy aluminum casing resists high temperatures, moisture, and vibrations.
- Efficient Heat Dissipation: Prevents overheating with its advanced aluminum shell design.
- Wide Applications: Compatible with cars, motorcycles, inverters, LED lights, speakers, power supplies, and more.
- Easy Installation: Screw-mounted design with compact dimensions for seamless integration.
100 x Red Heat Shrinking Sleeves
In stock
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
Auto Dimming IRVM for Renault Duster, Triber, Kiger, Kwid, Lodgy
In stock
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
W21W T20 DRL White
In stock
Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
Reverse Backup Camera for Volkswagen, Skoda, Audi Cars – CVBS 720p, Waterproof
In stock
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
R23 160W H7 H18 4300K Warm White
In stock
H4, HS1 Mini Projector for Cars, Trucks (Pack of 2)
In stock
Versatile H7 LED Adapter Skoda Slavia Kushaq – Perfect Fit for Skoda, Ford, Citroen More
In stock
Easily upgrade your headlights with this durable ABS Mount h7 led adapter for Skoda Slavia, Kushaq headlights. Designed for Skoda Slavia, Kushaq, and Ford Citroen, it ensures a secure fit without modifications. Please verify compatibility before purchasing.
- Universal Fit: Compatible with Skoda Slavia, Kushaq, Ford Citroen, and other vehicles with matching headlight mounting.
- Durable Construction: Made from high-grade ABS plastic, ensuring heat and corrosion resistance.
- Secure Installation: Locks H7 LED bulbs firmly into your car’s stock headlight housing.
- No Modifications Needed: Install LED HID bulbs without damaging the original socket.
- Important Compatibility Check: Verify headlight socket before purchasing.
160W D1S D Series HID to LED Kit 4300K Warm White
In stock
This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
4726FM Propeller Blades for DJI Mini 4K, Mini 2, 2SE, SE
In stock
Upgrade your DJI Mini drone with Quiet Propeller Blades. Designed for DJI Mini 2, Mini SE, Mini 2 SE, and DJI Mini 4K blades , these blades offer quieter flights and enhanced stability.
- Quieter Operation: Reduces noise for sensitive environments.
- Official 4726 FM Specs: Optimized for DJI Mini drones.
- Lightweight Design: 0.6g per blade for stable flight.
- Easy Installation: Simple setup with clear instructions.
- Durable Construction: Built for long-lasting performance.
- Not Compatible with: DJI Mavic Mini (Mini 1)
Amber/Orange T10/T15 LED
In stock
Upgrade your vehicle’s lighting with the W5W W16W Canbus T10 T15 Canbus LED Bulbs. Featuring 26 double-sided 4014 LED chips, these bulbs deliver intense brightness, energy efficiency, and error-free operation for a variety of automotive lighting needs.
- High-Intensity Illumination: 26 LED chips for superior brightness.
- Error-Free Design: Built-in resistors eliminate Canbus errors.
- Energy Efficient: Consumes only 5 watts per bulb.
- Compact Size: Fits standard automotive light housings.
- Versatile Use: Ideal for parking, cabin, and license plate lights.
- NOTE: Please ensure that the light housing has a minimum clearance of 26mm from the socket to accommodate the fitment of this long LED.
Auto Dimming IRVM for Mahindra Thar (New), Bolero, Bolero Neo, Scorpio Classic
In stock
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
