Filter by brand
- BRDRC 4
DurvientDurvient 116- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 2
- Volkswagen 17
SIngle to Dual Horn Splitter Harness for Skoda Volkswagen
Important Purchase Notice
This is a non-returnable product. Please verify compatibility with your installer, dealer, or electrician before placing the order.
Order only after confirming the correct connector and use case for your vehicle.
Single to Dual Horn Harness - Complete plug-and-play kit to convert your single horn setup to dual horns without cutting factory wires.
- Complete Kit: 1 male + 2 female connectors pre-assembled with 1.2 meter long wiring harness.
- No Modification: Plug-and-play installation.
- Dual Conversion: Converts single connection to dual outputs.
- Compatible with: Skoda Kylaq, Kushaq, Slavia, Rapid. Volkswagen Polo, Taigun, Virtus, Vento etc.
- Connector Type: 4D0 971 992 male and female connectors.
Door Trim Ciip for VW Polo/Vento/Jetta Skoda Rapid/Fabia Laura/Superb Part no. 7L6 868 243
Door Trim Clip Panel Retainer (Part no. 7L6868243) For VW, Audi, Skoda
- OEM Fit: Direct replacement for 7L6 868 243 on Volkswagen, Skoda, and Audi.
- Durable Nylon Construction: Flexible, wear-resistant for daily use.
- Integrated Sealer: Improves grip and reduces vibration or rattle.
- Easy Install: Push-fit design suitable for 8mm holes - no special tools needed.
- Pack Includes: 10 clips for front/rear door or quarter panel trim.
Dual Color T10/T15 Indicator + DRL LED
Upgrade to dual color T10 LEDs for turn signals (amber) and DRL/parking lights (white). 400LM output, plug-and-play install.
- 2-in-1 Function: Amber turn + white DRL for motorcycles and scooters.
- Better Safety: Presence of DRL increases vehicle visiblity. Best suited for the vehicles without DRLs from factory.
- Plug & Play: Stock T10/T15 Socket allows plug and play installation without any modifications.
- 3014 SMD Chips: Bright 27 white + 27 amber per LED for better visual and visiblity.
- Aluminum Body: Durable and Effective Heat Dissipation.
- Wide Fit: T10, W5W, W10W sockets.
- Includes: 2 LEDs + 2 Tap connectors for DRL connections.
Dual-Color Spotlight Waterproof Auxiliary Light for Cars, Motorbikes, ATVs, and 4x4s – High-Performance Spotlight
Upgrade your vehicle's lighting with the Dual-Color Spotlight Waterproof LED Auxiliary Light. Featuring white and yellow beams, IP68 waterproof rating, and universal compatibility, this high-performance spotlight ensures safety and visibility in all weather conditions.
- Dual-color illumination: Switch between white and yellow beams.
- IP68 waterproof rating for all-weather durability.
- High-performance 2400 Lumen output with bifocal lens design.
- Universal compatibility with 9-15V DC vehicles.
- Easy installation with adjustable mounting bracket.
80mm Angel Eye DRL Halo Ring with Amber Indicators for Cars & Motorcycles – Versatile Driving Fog Light & Turn Signal
Upgrade your vehicle’s lighting with this versatile 80mm Angel Eye DRL Halo Ring. Serving multiple functions including DRL and turn signals, this easy-to-install accessory enhances both style and safety. Compatible with cars and motorcycles.
- Versatile Application: Use as daytime running lights, turn signals, fog lights, high beams, and more.
- Premium Construction: Made from durable transparent acrylic with built-in constant current stabilization.
- Easy Installation: Direct replacement for old or damaged lights, suitable for cars and motorcycles.
- Wide Compatibility: Compatible with vehicles that support 9V ~ 30V DC voltage.
- Stylish Upgrade: Enhance your vehicle’s appearance and functionality with this modern lighting solution.
Propeller Holder for DJI Mini 4 Pro – Sensor Protection, Adjustable Silicone Strap, and Quick-Release Design
Protect your drone's propellers and sensors with this specialized Propeller Holder for DJI Mini 4 Pro. Featuring an adjustable silicone strap and quick-release design, it ensures secure storage and transport.
- Adjustable Fit: Silicone strap accommodates propeller variations.
- Sensor Protection: Shields obstacle avoidance and filler lights.
- Quick-Release: Effortless installation and removal.
- Compact Design: Easy to carry without added bulk.
- Compatibility: Designed exclusively for DJI Mini 4 Pro.
4 x Windshield Ticket Holder
Organize your car windshield with the Transparent Parking Ticket Holder. This acrylic clip securely displays parking tickets, notes, or cards without blocking your view.
- Discreet Design: Fully transparent and low-profile.
- Easy Installation: Adhesive tape (no residue).
- Multi-Use: Holds tickets, cards, or shopping lists.
- Durable Material: Shatter-resistant acrylic plastic.
- Universal Fit: Works on glass, fridges, or doors.
10 Pin MQB Automatic Headlight Switch for Vento Highline Plus
Upgrade to an Automatic Headlight Switch with part no. 5ND941431A for VW and Skoda models. Features integrated light sensor, three lighting modes, and OEM fit for easy plug-and-play installation.
- Automatic Headlight Switch – OEM part no. 5ND941431A with light sensor.
- Three Lighting Modes – Choose from Tunnel, Normal, and Delay for a custom experience.
- Plug-and-Play Design – 10-pin layout for seamless fit with VW and Skoda models.
- Durable Construction – ABS plastic and long 112cm cable for extended reliability.
- Compatible Models – Works with select VW and Skoda vehicles for easy, hands-free headlight control.
150W H4 H19 HS1 4300K Warm White
DJI RC2 Sunshade Protective Cover
Upgrade your DJI RC2 sunshade controller with this 2-in-1 sunshade and joystick protector. Blocks glare, shields controls, and fits Mini 4 Pro, Air 3, and Mavic 4 drones.
- Anti-Glare Design: Clear screen visibility in sunlight.
- Joystick Guards: Prevent dust and scratches.
- RC2 Exclusive: Fits only DJI RC2 (RC with antennas).
- Tool-Free Setup: Attach in seconds.
Solid Performance Canbus ErrorFree P21W BA15S LED Flat Pin Auto Lamp for Cars & Motorcycles
Upgrade your vehicle's lighting with the P21W BA15S 1156 LED Bulb—designed for bright, error-free performance.
- Canbus Error-Free Design: Built-in resistor prevents hyperflashing for seamless operation.
- Energy Efficient: Consumes less than 15W compared to traditional 21W halogen bulbs.
- Bright Illumination: Equipped with 35 premium SMD LED chips for superior lighting performance.
- Plug-and-Play Installation: Matches the size of halogen bulbs for easy, modification-free installation.
- Wide Compatibility: Suitable for brake, reverse, fog, and parking lights in cars, bikes, and trucks.
Silicon Propeller Holder for DJI Air 3S/Air 3
Protect your drone propeller holder for DJI Air 3s, Air 3 with the Soft Silicone Propeller Holder. This lightweight, quick-lock accessory prevents scratches and deformation during storage and transport.
- Precise Fit: Designed exclusively for DJI Air 3.
- Soft Silicone: Protects blades from scratches and collisions.
- Quick-Lock Design: Easy to install and remove.
- Lightweight: Adds minimal weight to your drone.
- Stylish Grey: Complements the DJI Air 3’s design.
Propeller Blades for DJI Mini 3, Lito 1, Lito X1 (not Mini 3 Pro)
Upgrade your drone with high-performance polycarbonate Blades for DJI Mini 3, Lito 1, Lito X1. Made from lightweight polycarbonate, they offer quieter flights, improved efficiency, and exclusive compatibility.
- Aerodynamic Design: 6030F specification for smoother, quieter flights.
- Lightweight: Each blade weighs only 0.9g for minimal drone load.
- Durable Material: Made of premium polycarbonate (PC) for longevity.
- Complete Set: Includes 8 blades, screws, and a screwdriver.
- Exclusive Compatibility: Designed for DJI Lito 1, Lito X1, Mini 3 (not for Mini 3 Pro).
Lens Hood Gimbal Protector for DJI Mini 4 Pro
Protect your drone's lens and gimbal with the DJI Mini 4 Pro Lens Hood Anti-glare Sunshade. This lightweight, precision-designed accessory blocks stray light, enhances aerial photography, and adds 8mm of belly height for extra protection.
- Anti-Glare: Blocks stray light for clearer shots.
- Increased Protection: Adds 8mm belly height for gimbal and lens safety.
- Precision Fit: Designed for DJI Mini 4 Pro without affecting camera rotation.
- Lightweight: Weighs only 14g for portability.
- Quick Installation: One-step setup for hassle-free use.
Motorcycle Clutch Brake Wire Lubricator Oiler Tool
Effortlessly lubricate throttle, clutch, and brake cables with this universal Motorcycle Cable Lubrication Tool. Simple to use and built to last, it’s an essential tool for smooth and reliable cable performance.
- Universal Fit: Suitable for motorcycles, scooters, and bicycles.
- Easy to Use: Inject lubricant effortlessly with the dual screw vise design.
- Durable Construction: Made from high-quality aluminum alloy for long-lasting use.
- Improved Design: Enhanced cable sealing for better performance.
- Compact and Portable: Small enough to fit in your toolbox, ready for any maintenance task.
10 x Yellow T-Tap Connector
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.