Filter by brand
- BRDRC 4
DurvientDurvient 116- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 2
- Volkswagen 17
VW Skoda Footwell Boot Light Assembly
Upgrade your Audi, Volkswagen, or Skoda with the OEM Light Assembly (3TD 947 565). This plug-and-play kit offers easy installation, OEM compatibility, and versatile use for front, rear, or boot lighting.
- OEM Fitment: Matches VAG part numbers 3TD947565, 6L0947415, 7L0 947 415, 5GG 947 409, 5ND 947 415, 1KD 947 415
- Wide Compatibility: Fits Virtus, Taigun, Slavia, Octavia, and more.
- 5-Minute Install: No wiring modifications needed.
- LED-Ready: Pair with T10 bulbs for modern lighting.
- Durable Build: OEM-quality materials for long-term use.
160W D3S/D3R D8S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D3S/R, D8S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
White T10 W5W LED
Upgrade your vehicle’s lighting with the Ultra-Compact T10 Canbus LED Bulbs. These error-free, energy-efficient bulbs are perfect for replacing halogens in cabin lighting, license plates, and parking lights.
- Canbus Error-Free: No flickering or dashboard warnings.
- Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
- Plug-and-Play: Matches halogen size (9x23mm).
- Multi-Use: Ideal for interiors, license plates, and more.
- Energy Saver: Uses 80% less power than halogens.
Grey Prop Holder Mini 4 Pro
Protect your drone's propellers and sensors with this specialized Propeller Holder for DJI Mini 4 Pro. Featuring an adjustable silicone strap and quick-release design, it ensures secure storage and transport.
- Adjustable Fit: Silicone strap accommodates propeller variations.
- Sensor Protection: Shields obstacle avoidance and filler lights.
- Quick-Release: Effortless installation and removal.
- Compact Design: Easy to carry without added bulk.
- Compatibility: Designed exclusively for DJI Mini 4 Pro.
50 x Blue Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
50 x Green Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
Green Car Door Reflective Sticker
Enhance your vehicle’s safety with the Car Door Reflective Stickers. These high-visibility reflectors warn approaching vehicles when your car doors are open, reducing accident risks in low-light conditions.
- Enhanced Safety: Alerts drivers to open car doors.
- Multicolor Options: Available in Red, White, Yellow, and Green.
- Easy Installation: Peel-and-stick adhesive for quick setup.
- Durable Material: High-quality reflective plastic for longevity.
- Complete Coverage: Pack of 4 stickers for all car doors.
OBD 1 (Male) to 2 (Female) Splitter Cable
Upgrade your vehicle’s OBD II port with the Low Profile OBD Splitter Cable. This dual-port extension enables multi-device connectivity for diagnostics, tracking, and security systems, all while protecting your factory port.
- Dual-Port Design: Split data and power connections effortlessly.
- Angled Connector: Low-profile design for tight spaces.
- Durable Construction: Copper wiring and rugged plastic housing.
- Universal Fit: Compatible with all 16-pin OBD II vehicles.
- Easy Setup: Plug-and-play installation in seconds.
Foldable Spider Landing Gear for DJI Mini 4 Pro: Take Off & Land Anywhere with Confidence
Enhance your drone’s stability and protection with the Foldable Spider Landing Gear For DJI Mini 4 Pro. Lightweight, portable, and easy to install, it raises your drone by 30mm for safe take-offs and landings on uneven surfaces.
- Spider-leg design for enhanced stability on rough terrains.
- Ultra-lightweight 21g ABS construction.
- 30mm height increase to protect vital drone components.
- One-step installation with anti-slip silicone pads.
- Foldable design for portability and easy storage.
LED Mini Projector Headlight/Fog Lamp H8/H11/H16 – 55W (110W a pair) Plug and Play Upgrade for Cars and Bikes
Upgrade your vehicle with the LED Mini Projector Headlight/Fog Light. Featuring a plug-and-play design, crisp beam focus, and superior heat management, it’s perfect for enhancing visibility and safety.
- Easy plug-and-play installation with no modifications required.
- Sharp LHD projector-style light beam for focused illumination.
- IP65 rated for dust and waterproof performance.
- Compact design compatible with H8/H9/H11, H16 sockets.
- Advanced cooling with aviation-grade turbo fan and thermal system.
B-Shape Rubber Seal for Cars & Home
Upgrade your vehicle’s insulation with the B-Type Car Door Rubber Seal. This 5-meter strip reduces noise and seals out dust, water, and wind for a smoother, quieter drive.
- Noise Reduction: Blocks road and wind noise effectively.
- Weatherproof Design: Protects against dust, moisture, and debris.
- 3M Adhesive: Easy DIY installation with no tools required.
- Universal Fit: Works on doors, trunks, engine bays, and windows.
- Durable Rubber: Flexible and long-lasting.
150W HB3 9005 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
Front & Rear Footwell Kit for VW Skoda
Upgrade your Volkswagen or Skoda’s interior with the OEM Front and Rear Footwell Kits. These kits add ambient lighting to your car’s footwells, enhancing visibility and style. Designed for easy DIY installation, they include halogen bulbs (upgradable to T10 LEDs) and pre-wired harnesses for a seamless setup.
- OEM Quality: Genuine part No. 5GG 947 409 ensures reliability.
- Front & Rear Options: Choose between front-only or front+rear lighting.
- Wide Compatibility: Fits Volkswagen Polo, Vento, Ameo, Skoda Rapid, Slavia, and more.
- DIY-Friendly: Includes pre-wired harnesses and OE connectors.
- LED-Upgradable: Swap halogen bulbs for T10 LEDs for brighter lighting. Grab LED from here
- Complete Kits: Comes with lights, harnesses, and fuse taps (only with front footwell).
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
Waterproof Heat Shrink Solder Sleeve Connector for Cable Insulation Wire Connector (Different Sizes)
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
Orange/Amber Double Sided Flat T10 W5W W10W LED
