Filter by brand
- BRDRC 4
DurvientDurvient 116- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 2
- Volkswagen 17
Trunk Handle Camera for Octavia, Tiguan, Q3, Q4…
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
56W H7, H18 CSP3570
Upgrade your vehicle’s lighting with the 56W LED Headlight Fog Lamp. Featuring Canbus error-free technology and a 1:1 halogen design, these headlights deliver superior brightness and easy installation.
- High Brightness: 4,500 lumens for clear visibility.
- Canbus Error-Free: Compatible with 95% of vehicles.
- Plug-and-Play: No modifications required.
- Durable Build: Waterproof and weather-resistant.
- Wide Compatibility: Fits H4, H7, HB3, HB4, and more.
144 LED White BA15S
Upgrade your vehicle’s lighting with the P21W BA15S 1156 LED Bulb. Featuring 144 SMD LEDs and error-free operation, it’s ideal for brakes, reverse lights, and indicators.
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- 21-25W Efficiency: Brighter than halogen, prevents dashboard errors.
- Error-Free Design: Built-in resistor prevents hyper-flashing.
- Dual Colors: White for reverse lights, Amber for brakes/indicators.
- Plug-and-Play: Direct replacement for halogen bulbs.
2 x 31mm Festoon LED
Upgrade your vehicle’s lighting with the Canbus Error Free Festoon LED Light, also known as C5W, C10W bulbs. Featuring Canbus error-free technology and SMD LED chips, it delivers bright, energy-efficient illumination for cabin, license plate, and parking lights.
- Error-Free Design: Built-in Canbus resistors prevent dashboard errors.
- Energy Efficient: Consumes less than 3W per bulb.
- Multiple Sizes: Available in 31mm, 31-36mm combo, 36mm, 38mm, and 41mm.
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality SMD LED chips for longevity.
Non-Splice Posi-Tap Connector Blue | 16-18 AWG Wire Gauge | EX-130R-604
Simplify your electrical connections with the Non-Splice Posi-Tap Connector EX-130R-604. Designed for 16-18 AWG (0.75 ~ 1.5 sq mm) wires, this tool-free, hot-swappable connector ensures secure, non-destructive wiring for automotive and electrical projects.
- Non-Splice Design: Tap into wires without cutting or crimping.
- Tool-Free Installation: No crimping, soldering, or tape required.
- Hot Swappable: Easily connect or disconnect wires as needed.
- Wide Compatibility: Works with 16-18 AWG wires.
- Durable Build: Made from high-quality ABS material.
Bright P21W BA15S 1156 LED Bulb – Flat Pin 180° for Brakes, Reverse, Indicators
Upgrade your vehicle’s lighting with the P21W BA15S 1156 LED Bulb. Featuring 144 SMD LEDs and error-free operation, it’s ideal for brakes, reverse lights, and indicators.
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- 21-25W Efficiency: Brighter than halogen, prevents dashboard errors.
- Error-Free Design: Built-in resistor prevents hyper-flashing.
- Dual Colors: White for reverse lights, Amber for brakes/indicators.
- Plug-and-Play: Direct replacement for halogen bulbs.
H4 Mini Projector With Sharp Cut-Out 35W H4, HS1, H19 6000K White, 300% Brighter for Cars & Motorcycles
The H4 Mini Projector LED Headlight offers sharp cut-out beam control, bright 6000K light, and a long lifespan. Compatible with cars and motorcycles, it’s a reliable upgrade for superior visibility.
- 300% Brighter Than Halogen Bulbs: 35W power with CSP chips ensures exceptional brightness.
- Sharp Beam Cut-Off: Avoids glare for oncoming drivers.
- Efficient Heat Dissipation: Aviation-grade aluminum housing and cooling fan extend lifespan.
- Easy Installation: Plug-and-play design for H4/HS1/H19 sockets.
- Durable and Waterproof: IP65 rating ensures performance in all weather conditions.
Step-by-Step installation guide available here: Teambhp, courtesy: Atharva M.
H4 H19 F90 Laser Mini Projector Headlight LED – Low + High Beam + Laser, 6000K White
F90 Laser Mini Projector LED with Laser Spotlight - Compact bi-lens projector with flat low-beam cutoff and powerful high beam plus laser spot. Universal H4/HS1/H19 compatibility.
- Dual Output: 55W low beam, 85W high + laser
- Complete Optics: Internal reflector and solenoid shutter
- Crisp White Light: 6000K color temperature
- Universal Fit: H4, HS1, H19 sockets
- Damaged Headlight Reflector? Good news, this is a self sufficient projector, does not need headlight reflector.
50 x Blue Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
3 Inch Headlight Projector for OE Projector Replacement
S75 3 Inch Bracket Mount Projector - OEM Projector Replacement
- Bracket mount: Secure, direct replacement for factory projectors
- Ultra-bright 75W LED + laser: Crisp high/low beam output
- Dual beam: Integrated high and low function
- 6000K white: Daylight bright and safe
- Fits OEM projector mount: No custom bracket needed if replacing factory unit
Red T10 W5W LED
Upgrade your vehicle’s lighting with the Ultra-Compact T10 Canbus LED Bulbs. These error-free, energy-efficient bulbs are perfect for replacing halogens in cabin lighting, license plates, and parking lights.
- Canbus Error-Free: No flickering or dashboard warnings.
- Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
- Plug-and-Play: Matches halogen size (9x23mm).
- Multi-Use: Ideal for interiors, license plates, and more.
- Energy Saver: Uses 80% less power than halogens.
160W D2S/D2R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.