Filter by brand
- BRDRC 4
DurvientDurvient 116- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 3
- Volkswagen 18
Door Trim Ciip for VW Polo/Vento/Jetta Skoda Rapid/Fabia Laura/Superb Part no. 7L6 868 243
Door Trim Clip Panel Retainer (Part no. 7L6868243) For VW, Audi, Skoda
- OEM Fit: Direct replacement for 7L6 868 243 on Volkswagen, Skoda, and Audi.
- Durable Nylon Construction: Flexible, wear-resistant for daily use.
- Integrated Sealer: Improves grip and reduces vibration or rattle.
- Easy Install: Push-fit design suitable for 8mm holes - no special tools needed.
- Pack Includes: 10 clips for front/rear door or quarter panel trim.
20A Mini Fuse (Pack of 10)
Protect your vehicle’s electrical system with the Mini Fuse ATM APM Fuse Kit. Designed for European cars, this kit includes color-coded fuses in multiple amperage ratings for easy identification and quick replacement.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy to identify and replace.
- Durable Materials: Zinc alloy and non-conductive plastic.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Mercedes, and more.
- Secure Storage: Includes a labeled storage box.
Propeller Guards for DJI Mini 5 Pro Drone – Quick-Release Protective Frame Set
Propeller Guards for DJI Mini 5 Pro - A complete set of quick-release protective frames designed to shield your drone's propellers from collisions during flight. Easy to install and lightweight.
- Perfect Fit: Designed exclusively for the Mini 5 Pro.
- Impact Protection: Sturdy frame helps prevent propeller and obstacle damage.
- Lightweight Design: Minimal added weight for uninterrupted flight.
- Tool-Free Install: Simple snap-on attachment with secure clips.
Gimbal Protector Lens Hood for DJI Air 3
Protect your DJI Air 3 and Air 3S from unwanted glare with this lightweight, durable, and easy-to-install lens hood. Enhance your aerial photography effortlessly.
- DJI Air 3 Lens Hood.
- Blocks stray light for sharper photos.
- Lightweight (12g) and easy to carry.
- Made from durable ABS plastic.
- Hassle-free one-step installation.
50 x Blue T-Tap Connectors
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
Orange Prop Holder Mini 4 Pro
Protect your drone's propellers and sensors with this specialized Propeller Holder for DJI Mini 4 Pro. Featuring an adjustable silicone strap and quick-release design, it ensures secure storage and transport.
- Adjustable Fit: Silicone strap accommodates propeller variations.
- Sensor Protection: Shields obstacle avoidance and filler lights.
- Quick-Release: Effortless installation and removal.
- Compact Design: Easy to carry without added bulk.
- Compatibility: Designed exclusively for DJI Mini 4 Pro.
OEM VW/Skoda Front & Rear Footwell Lighting Kits (Part no 5TD 947 409, 2GD 947 409) DIY Fit for Taigun, Virtus, Kushaq, T-Roc & More
Upgrade your VW/Skoda’s interior with OEM Footwell Lighting Kits (Part #5TD 947 409, 2GD 947 409). Pre-installed LEDs, plug-and-play harnesses, and universal fit for Taigun, T-Roc, Virtus, Kushaq, and more.
- Genuine VAG Parts: 5TD 947 409 / 2GD 947 409.
- Pre-Installed LEDs: No bulb upgrades needed.
- Kit Options: Chose from either front or rear kit (2 x footwell) or Front + rear (4 x footwell) kits options
- DIY Installation: No coding required for fusebox installation, BCM installation requires coding (coding service not included)
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
160W D5S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D5S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
H4/HS1 Dual Lens Mini Projector with Laser Spotlight
Reverse Camera for Small Boot Latch For Vento/Rapid (big connector, retrofitted)
16-12 AWG In-Line Fuse Holder with Regular Fuse
Protect your electrical circuits with the Waterproof In-Line Fuse Holder. Featuring a 16 AWG wire and a 15A ATC/ATO blade fuse, this durable fuse holder is perfect for cars, boats, and industrial applications.
- Waterproof Design: Tight-fitting lid prevents water and dust ingress.
- 16 AWG Wire: Heavy-duty red wire for reliable connections.
- 15A Fuse Included: Protects circuits from overloading.
- Wide Compatibility: Works with ATC/ATO blade fuses (1A-15A).
- Easy Installation: Simple loop design for quick setup.
DJI Mini 5 Pro Propeller Blades (Pack of 4)
Low-noise blades for DJI Mini 5 Pro Propellers - 6028F blades for smooth, stable flight.
-
- Made for Mini 5 Pro: Sized and balanced for the Mini 5 Pro drone.
- Low noise: Blade profile helps reduce flight noise.
- Durable plastic: Tough yet flexible material resists cracks.
- Quick-release: Tool-free install and removal.
- Full set: 4 blades, enough for one drone.
H4 Mini Projector With Sharp Cut-Out 35W H4, HS1, H19 6000K White, 300% Brighter for Cars & Motorcycles
The H4 Mini Projector LED Headlight offers sharp cut-out beam control, bright 6000K light, and a long lifespan. Compatible with cars and motorcycles, it’s a reliable upgrade for superior visibility.
- 300% Brighter Than Halogen Bulbs: 35W power with CSP chips ensures exceptional brightness.
- Sharp Beam Cut-Off: Avoids glare for oncoming drivers.
- Efficient Heat Dissipation: Aviation-grade aluminum housing and cooling fan extend lifespan.
- Easy Installation: Plug-and-play design for H4/HS1/H19 sockets.
- Durable and Waterproof: IP65 rating ensures performance in all weather conditions.
Step-by-Step installation guide available here: Teambhp, courtesy: Atharva M.
150W H1 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.