Filter by brand
- BRDRC 4
DurvientDurvient 104- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 4
- TE Connectivity 3
- Volkswagen 15
Anti Glare IRVM (Mount no. 29) with Reverse Camera & DIsplay for Tata Mahindra Citroen
Compatibility table
| Car manufacturer | Car models |
|---|---|
| Tata | Altroz, Aria, Bolt, Harrier, Hexa, Indica, Indigo, Manza, Nano, Nexon, Nexon EV, Punch, Safari, Safari (2nd Gen), Tiago, Tiago EV, Tigor, Tigor EV, Zest |
| Citroen | C3, C5, C3 Aircross |
| Mahindra | Mahindra Thar (Facelifted), Bolero Neo, Scorpio, KUV100, TUV, Nuvosport, Quanto, Xylo (3rd Gen) |
Auto Dimming IRVM for Mahindra Thar Roxx (5Door)
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Auto Dimming IRVM for Skoda Slavia, Kushaq, Kylaq (No Rain/Light Sensor)
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
D3S HID Ballast for Audi Skoda Volkswagen Part No. 8K0 941 597
- Material: aluminum alloy; Input Voltage: 12V; Output Voltage: 85V; Output Power: 35W; Lifetime expectancy: 2000H; Compatibility: D3S/D3R D4S/D4R; Fits: left or right headlight
- OEM Part Number : 8K0941597, 8K0941597E; Interchange Part Number : 8K0941597E, BAM92-143700, W003T20171, W003T22071
- Fits Audi, BMW, Mercedes, Volkswagen, Skoda, Lamborgini with D3S/D4S HID/Xenon Headlight
- Easy Installation : Direct Replacement, no coding/programming required
- Note: please check if the number of your previous xenon ballast is exactly the same as the number(s) stated in the listing, or through the amazonconfirmedfit to make sure weather it fit for your previous hid ballast
Automatic DRL Controller Module
Upgrade your car’s lighting with the Smart Automatic LED DRL Controller. This plug-and-play relay automatically manages DRLs, offering features like dimming and voltage sensing for enhanced safety and efficiency.
- Automatic Activation: Turns on DRLs when battery voltage exceeds 13V.
- Delayed Deactivation: DRLs turn off 2-2.5 minutes after engine shutdown.
- Optional Dimming: Connect to headlights for reduced brightness at night.
- Plug-and-Play: Easy installation with no cutting or splicing.
- Safety Protection: Includes an inline fuse for added security.
Auto Dimming IRVM for Skoda Rapid with Rain/Light Sensor
1 x Magnetic Puddle Lamp
Magnetic Car Door Light – Add style with 7-color LED puddle lights. IR sensor turns on/off automatically. Rechargeable battery lasts up to 60 days. Easy magnetic or adhesive installation.
- 7 Colors: White, blue, ice blue, red, green, yellow, pink.
- IR Sensor: Auto on/off with door movement
- Light Sensor: Turns off in daylight to conserve battery
- Rechargeable: 400mAh battery, USB-C charging.
- 4 Modes: Constant, gradient, breathing, flashing.
- Easy Install: Magnetic or adhesive mount.
160W D1S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
OEM VAG Horn Connectors – Male/Female 4D0 971 992 with 6-inch Wires for Volkswagen, Skoda, Audi
OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
- OEM Fit: Direct replacement 4D0 971 992 connectors
- Dual Options: Available as male or female connectors
- Pre-Wired: 6-inch harness for easy installation
- High Power: 100W capacity for all horn types
OEM 2-Pin Connector Part No. 3B0972702 & 3B0972712 For Audi, VW, Skoda
VW 2 Pin connector part numbers 3B0972702 and 3B0972712. Restore your VAG vehicle’s electrical systems with the OEM 2-Pin 1.5mm Connector. Designed for Audi, VW, Skoda, and Seat, this durable plug ensures reliable connections for sensors, lights, and more.
- OEM Fit: Replaces part numbers 3B0972702 and 3B0972712.
- Tin-Plated Copper: Resists oxidation for stable conductivity.
- Easy Installation: Crimp or solder-free setup.
- Wide Application: Sensors, lights, speakers, injectors.
- 14V/10A Rating: Safe for critical electrical systems.
Laura (Auto AC) Stereo Frame Fascia
Upgrade your Skoda’s stereo system with the Double Din Facia RCD Stereo Frame. Designed for Skoda Yeti, Laura, and Octavia models, this facia ensures a seamless fit for RCD330, RCD340, RCD360, and RCD880 head units.
- Compatibility: Upgrades RCD510/Swing/Bolero to modern multimedia systems.
- Perfect Fit: Seamlessly integrates with your dashboard.
- Durable ABS Plastic: Resists wear and maintains a sleek look.
- Tool-Free Installation: No modifications required.
- Sleek Design: Black/silver finish enhances your car’s interior.
10 x Yellow T-Tap Connector
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
Amber T15 WY16W for Indicators
Upgrade your vehicle’s lighting with the Canbus Error Free T15 W16W/WY16W LED Bulb. Featuring 360° illumination and no hyperflash, this bulb is perfect for turn signals, reverse lights, and parking lights.
- Canbus Error-Free: Prevents dashboard warnings and hyperflashing.
- 360° Illumination: Ensures visibility from all angles.
- Energy Efficient: 9W power consumption for reduced energy use.
- Plug-and-Play: Matches halogen bulb size for easy installation.
- Durable Cooling: Aluminum heat sink for extended lifespan.
- Wide Compatibility: Compatible with 90% of the vehicles without Error and hyper flashes.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
White T20 W21W LL 7440
Upgrade your vehicle’s lighting with the T20 7440 LED Bulbs. Available in Amber, Red, and White, these error-free bulbs are perfect for indicators, brake lights, and reverse lights.
- Color Options: Amber, Red, and White for various lighting needs.
- Error-Free Operation: Compatible with Canbus systems.
- 360° Illumination: 44 curved LED chips for maximum brightness.
- Energy Efficient: Consumes only 25W, outperforming halogen bulbs.
- Easy Installation: Plug-and-play design for hassle-free replacement.
150W H27, 880, 881 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
130W H1 6000K
130 Watt High-Performance LED Headlight for cars and bikes offer high brightness, 1:1 halogen compatibility, and a Canbus error-free driver for seamless installation. Perfect for all weather conditions!
- High Performance Series High Powered LED Headlight Bulb Fog Lamp Cornering LampBulbs for Cars and Bikes
- 1:1 design compared to halogen. NO Blindspot, NO scattered beam
- Available in 6000K White 120~130W/pair (60~65W per bulb) power consumption Heavy duty 3570 LED Chips
- In line canbus error free LED driver for highend cars. Suitable with 99% of the cars on the road
- Low profile and Plug and Play, no modification needed
