Showing 161–176 of 441 results

15A Regular/Standard Fuse (Pack of 10)

229.00 Pack of 10

Protect your vehicle’s electrical system with the Regular Standard Fuse Kit. Featuring ATC, ATO, and APR fuses in a range of amperages, this kit is perfect for European cars and general-purpose applications.

  • Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
  • Color-Coded Design: Easy identification of fuse ratings.
  • Durable Build: Zinc alloy terminals and non-conductive plastic.
  • Wide Compatibility: Suitable for cars, trucks, SUVs, and boats.
  • Easy Installation: Standard blade design for quick replacement.

Red RC-N1/N2/N3 Silicone Cover

Original price was: ₹1,200.00.Current price is: ₹699.00. Cover

Grab Soft Silicone Cover DJI RC-N1, N2, or N3 remote controller with this soft silicone cover. Designed for non-display controllers, it offers enhanced grip, drop protection, and easy cleaning.

  • Enhanced Grip: Non-slip silicone texture for secure handling.
  • Drop Protection: Absorbs shocks to prevent damage.
  • Precision Fit: Full access to buttons, ports, and switches.
  • Easy to Clean: Resists dirt, dust, and oil.
  • Compatibility: DJI RC-N1, N2, N3 (Non-Display Controllers).

150W D3S/D3R D8S D Series HID to LED Kit 4300K Warm White

⚠️ D3S/D3R, D8S HID to LED Conversion Notice

This product is a D-Series LED replacement for D3S/R, D8S HID bulbs and is not plug-and-play with the factory HID ballast.

  • It does NOT include the standard D-Series block connector that plugs into the ballast.
  • The LED operates using two direct power wires only:
    • Red wire: Positive (+)
    • Black wire: Ground / Negative (–)
  • These wires must be connected to the vehicle’s headlight power supply before the ballast.
  • The factory HID ballast must be bypassed or disconnected for proper operation.

ISO to Quadlock Connector Conversion Cable Canbus Harness for Volkswagen & Skoda RCD 330/340/510

Select options This product has multiple variants. The options may be chosen on the product page

Important

This product is sold with two options: with support and without support. Your choice is final. Support cannot be purchased separately at a later date. Support amount paid is non-refundable.

If you are not fully confident about CANBUS wiring or BCM compatibility, please select the with support plan at the time of purchase.

Upgrade your VW or Skoda stereo with the ISO to Quadlock Connector Conversion Cable. This adapter supports RCD 330/340, RNS 510, and Android head units, offering plug-and-play installation with no wire cutting.

  • Seamless Compatibility: Works with RCD 330, RCD 340, RNS 510, and Android units.
  • Canbus Harness: Includes two extended cables for BCM connection.
  • Wide Fitment: Compatible with VAG PQ platform cars Polo, Vento, Jetta, Ameo, Fabia and Rapid.
  • Durable Build: Ensures reliable and secure connections.

White P21W BA15S Flat Pin LED

Original price was: ₹1,200.00.Current price is: ₹849.00. Set of 2

Upgrade your vehicle's lighting with the P21W BA15S 1156 LED Bulb—designed for bright, error-free performance.

  • Canbus Error-Free Design: Built-in resistor prevents hyperflashing for seamless operation.
  • Energy Efficient: Consumes less than 15W compared to traditional 21W halogen bulbs.
  • Bright Illumination: Equipped with 35 premium SMD LED chips for superior lighting performance.
  • Plug-and-Play Installation: Matches the size of halogen bulbs for easy, modification-free installation.
  • Wide Compatibility: Suitable for brake, reverse, fog, and parking lights in cars, bikes, and trucks.

Washable Soft Silicone Cover for DJI RC1 Remote Controller – Compatible with DJI Air 2S, Mini 3, Mini 3 Pro

Black
Grey
Red
Select options This product has multiple variants. The options may be chosen on the product page

Protect your DJI RC1 remote controller with this soft silicone cover for DJI RC1/Smart RC. Designed for DJI Air 2S, Mini 3, and Mini 3 Pro, it offers a snug fit, non-slip grip, and full access to buttons and ports.

  • Premium Protection: Shields from dust, dirt, and drops.
  • Non-Slip Grip: Ensures a secure hold in all conditions.
  • Lightweight Design: Easy to carry and clean.
  • Precision Fit: Full access to buttons and ports.
  • Compatibility: DJI RC1 (Air 2S, Mini 3, Mini 3 Pro).

H4, HS1 Mini Projector for Cars, Trucks (Pack of 2)

Original price was: ₹6,500.00.Current price is: ₹4,499.00. Pc

This option consist of 2 LEDs, this option is suitable for the cars/trucks which uses two headlight assemblies.

6030F Propeller Blades for DJI Mini 4 Pro

Original price was: ₹1,000.00.Current price is: ₹829.00. Set

Upgrade your DJI Mini 4 Pro Bladeswith durable polycarbonate blades. This complete kit ensures balanced flight, reduced noise, and easy installation.

  • Polycarbonate Build: Lightweight and vibration-resistant.
  • Full Set: Includes 8 blades, screws, and a screwdriver.
  • Exclusive Compatibility: For DJI Mini 4 Pro only.
  • Visibility: Orange-tipped blades for easy tracking.
  • Critical Note: Replace all four blades together.

White BA15S P21W Canbus LED

Original price was: ₹1,500.00.Current price is: ₹1,049.00. Set of 2

Upgrade your vehicle’s lighting with the Canbus Error Free BA15S LED P21W Bulbs. Available in Amber, Red, and White, these Canbus error-free bulbs are perfect for indicators, brake lights, and rear fog lamps.

Important Fitment & Return Notice

This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.

If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED

Please check your existing bulb type and socket before ordering.

This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.

  • Color Options: Amber, Red, and White for versatile applications.
  • Error-Free Operation: Compatible with Canbus systems.
  • 360° Illumination: 44 curved LED chips for maximum brightness.
  • Energy Efficient: Consumes only 25W, outperforming halogen bulbs.
  • Easy Installation: Plug-and-play design for hassle-free replacement.

Dual Color Foldable Spider Landing for DJI Mini 4 Pro

Enhance your drone’s stability and protection with the Foldable Spider Landing Gear For DJI Mini 4 Pro. Lightweight, portable, and easy to install, it raises your drone by 30mm for safe take-offs and landings on uneven surfaces.

  • Spider-leg design for enhanced stability on rough terrains.
  • Ultra-lightweight 21g ABS construction.
  • 30mm height increase to protect vital drone components.
  • One-step installation with anti-slip silicone pads.
  • Foldable design for portability and easy storage.

D1S D1R HID to LED Conversion Kit (Plug and Play)

The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.

  • High Brightness: 15000LM/Pair for superior illumination
  • Easy Installation: Plug & Play, no modifications needed
  • Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
  • Durable: Lifespan over 50,000 hours, IP68 waterproof
  • Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets

Important: Works with stock HID Ballast only. Ensure ballast is in working condition.

50 x Green Heat Shrinking Sleeves

Original price was: ₹800.00.Current price is: ₹589.00. Packs

The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.

  • All-in-One Solution: Combines soldering, sealing, and insulation.
  • IP67 Waterproof: Ensures maximum water and corrosion resistance.
  • High-Quality Materials: Polyolefin tubing and hot melt adhesive.
  • Easy to Use: No additional tools required; heat shrink technology.
  • Wide Compatibility: Available in multiple sizes for various wire gauges (click here).

DJI Neo Anti Collision Crash Guard (Black)

Original price was: ₹900.00.Current price is: ₹649.00. Set

Protect your DJI drone with this DJI Neo Propeller Guard Cage. Lightweight, shock-absorbing, and easy to install – ideal for collision-prone flights.

  • Shock-Absorbing TPE: Minimizes collision damage.
  • Snap-On Design: No tools required.
  • 10g Weight: No impact on flight time.
  • Colors: Orange, Red, Black.

160W H8/H9/H11/H16 Tri Color Smart Bluetooth Controlled LED

Original price was: ₹7,800.00.Current price is: ₹5,299.00. 2 LEDs

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

  • High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
  • Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
  • Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
  • Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
  • Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

H4 H19 F90 Laser Mini Projector Headlight LED – Low + High Beam + Laser, 6000K White

Original price was: ₹7,000.00.Current price is: ₹5,499.00. Set of 2
Select options This product has multiple variants. The options may be chosen on the product page

F90 Laser Mini Projector LED with Laser Spotlight - Compact bi-lens projector with flat low-beam cutoff and powerful high beam plus laser spot. Universal H4/HS1/H19 compatibility.

  • Dual Output: 55W low beam, 85W high + laser
  • Complete Optics: Internal reflector and solenoid shutter
  • Crisp White Light: 6000K color temperature
  • Universal Fit: H4, HS1, H19 sockets
  • Damaged Headlight Reflector? Good news, this is a self sufficient projector, does not need headlight reflector.

Wireless Android Auto Apple CarPlay Adapter

Original price was: ₹4,000.00.Current price is: ₹1,699.00. Unit

Easily convert your car's wired CarPlay/Android Auto into the wireless carplay & android auto with this 2-IN-1 Mini USB Dongle Adapter. Plug & play design with automatic connection and compatibility with most car models.

  • 2-IN-1 Functionality: Converts factory-wired CarPlay & Android Auto to wireless.
  • Flushed USB: No more protuding dongle, flushed design allow concealing, reduces accidental damages.
  • Effortless Installation: Simple plug & play design, no additional apps or drivers needed.
  • Wide Compatibility: Works with over 95% of cars equipped with factory-wired CarPlay & Android Auto.
  • Seamless Experience: Automatic wireless connection after initial setup.
  • FOTA Online Updates: Supports firmware updates via FOTA for continuous improvements.