Showing 145–160 of 446 results

Door Trim Ciip for VW Skoda Part no. 3CN868243

Original price was: ₹600.00.Current price is: ₹449.00. Pack of 10

Door Trim Clip Panel Retainer (Part no. 3CN868243) For VW, Audi, Skoda

  • OEM Fit: Direct replacement for 3CN868243 on Volkswagen, Skoda, and Audi.
  • Durable Nylon Construction: Flexible, wear-resistant for daily use.
  • Integrated Sealer: Improves grip and reduces vibration or rattle.
  • Easy Install: Push-fit design suitable for 8mm holes - no special tools needed.
  • Pack Includes: 10 clips for front/rear door or quarter panel trim.

Reverse Camera Delay Timer Module

Original price was: ₹600.00.Current price is: ₹499.00. Module

Fix reverse camera errors on your VW or Skoda with the RCA Delay Timer Module, Relay Camera Filter. This plug-and-play module stabilizes voltage and adds a 10-second delay for seamless compatibility with RCD/MIB systems.

  • 10-Second Delay: Keeps camera active post-reverse gear.
  • Stable 12V Output: No flickering or blank screens.
  • Wide Compatibility: Works with RCD330, MIB, Polo, Vento, Rapid, and more.
  • Tool-Free Install: Connects in minutes with standard plugs.
  • Durable Design: ABS and copper construction.

160W D1S D Series HID to LED Kit 4300K Warm White

Original price was: ₹7,000.00.Current price is: ₹5,499.00. Pair
⚠️ D1S HID to LED Conversion Notice

This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.

  • It does NOT include the standard D-Series block connector that plugs into the ballast.
  • The LED operates using two direct power wires only:
    • Red wire: Positive (+)
    • Black wire: Ground / Negative (–)
  • These wires must be connected to the vehicle’s headlight power supply before the ballast.
  • The factory HID ballast must be bypassed or disconnected for proper operation.

White BA15S P21W Canbus LED

Original price was: ₹1,500.00.Current price is: ₹1,049.00. Set of 2

Upgrade your vehicle’s lighting with the Canbus Error Free BA15S LED P21W Bulbs. Available in Amber, Red, and White, these Canbus error-free bulbs are perfect for indicators, brake lights, and rear fog lamps.

Important Fitment & Return Notice

This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.

If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED

Please check your existing bulb type and socket before ordering.

This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.

  • Color Options: Amber, Red, and White for versatile applications.
  • Error-Free Operation: Compatible with Canbus systems.
  • 360° Illumination: 44 curved LED chips for maximum brightness.
  • Energy Efficient: Consumes only 25W, outperforming halogen bulbs.
  • Easy Installation: Plug-and-play design for hassle-free replacement.

RS3 3-Inch Bi-LED Dual Laser Fog Projector – White/Tri Color, IP65 Waterproof (Cars and Bikes)

Tri-color
White
Select options This product has multiple variants. The options may be chosen on the product page

Enhance nighttime driving safety with the RS3 3-Inch Bi-LED Dual Laser Fog Projector. Featuring dual lasers, a 6000K Daylight White beam, and IP65 waterproofing, it’s built for unmatched visibility and durability.

  • Multi-Color Options: Chose from ONLY white or Tri-Color options to fit your requirement.
  • Dual Laser Spotlights: Precision beams for long-range visibility.
  • Indian Road Legal: Right-hand or Flat Cut-out drive beam pattern compliant with regulations.
  • Universal Fit: Fits cars and bikes with 3-inch fog lamp assemblies.
  • IP65 Rated: Waterproof and dustproof for all weather.

9W Orange/Amber T15 W16W for Indicators Turn Signal, Parking

Original price was: ₹700.00.Current price is: ₹499.00. Set of 2

Upgrade your vehicle’s lighting with the T15 W16W/WY16W Canbus Error-Free LED Bulb. Featuring 48 advanced 2016 SMD LEDs, it delivers bright, energy-efficient illumination for turn signals, reverse lights, and parking lights.

  • 48x 2016 SMD LEDs: Brighter and more efficient than traditional LEDs.
  • Canbus Error-Free: No hyperflashing or dashboard warnings.
  • 360° Illumination: Ensures visibility from all angles.
  • Plug-and-Play: Direct replacement for T15 W16W/WY16W halogen bulbs.
  • Durable Cooling: Thick aluminum heat sink for extended lifespan.
  • Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).

Mount #60 Volkwagen Jetta

Original price was: ₹8,500.00.Current price is: ₹6,999.00. Set

Compatibility table

Car manufacturer Car models
Volkswagen Jetta

Mount #7 Astor, XUV300, 3X0, Hector, Hyundai

Original price was: ₹8,200.00.Current price is: ₹6,799.00. Set

Compatibility table

Car manufacturer Car models
MG Motors Astor, ZS-EV, Hector
Mahindra XUV300/Tivoli, Alturas, 3XO
Hyundai EON, i20 (before 2014, verification needed)

Red T10/T15 LED

Original price was: ₹500.00.Current price is: ₹349.00. Set

Upgrade your vehicle’s lighting with the W5W W16W Canbus T10 T15 Canbus LED Bulbs. Featuring 26 double-sided 4014 LED chips, these bulbs deliver intense brightness, energy efficiency, and error-free operation for a variety of automotive lighting needs.

  • High-Intensity Illumination: 26 LED chips for superior brightness.
  • Error-Free Design: Built-in resistors eliminate Canbus errors.
  • Energy Efficient: Consumes only 5 watts per bulb.
  • Compact Size: Fits standard automotive light housings.
  • Versatile Use: Ideal for parking, cabin, and license plate lights.
  • NOTE: Please ensure that the light housing has a minimum clearance of 26mm from the socket to accommodate the fitment of this long LED.

4726FM Propeller Blades for DJI Mini 4K, Mini 2, 2SE, SE

Original price was: ₹1,500.00.Current price is: ₹849.00. Pack of 8 blades

Upgrade your DJI Mini drone with Quiet Propeller Blades. Designed for DJI Mini 2, Mini SE, Mini 2 SE, and DJI Mini 4K blades , these blades offer quieter flights and enhanced stability.

  • Quieter Operation: Reduces noise for sensitive environments.
  • Official 4726 FM Specs: Optimized for DJI Mini drones.
  • Lightweight Design: 0.6g per blade for stable flight.
  • Easy Installation: Simple setup with clear instructions.
  • Durable Construction: Built for long-lasting performance.
  • Not Compatible with: DJI Mavic Mini (Mini 1)

2.5 Inch Round DRL Projector Shroud

Upgrade your headlights with the Premium 2.5 Inch Projector Shroud. Featuring integrated Angel Eye DRL, this shroud enhances both style and visibility for Bi-LED and Bi-HID systems.

  • Integrated DRL: Bright and efficient Angel Eye design.
  • Multiple Styles: Choose from Rectangle, Boxy, or Round.
  • Durable Build: Resistant to high temperatures and wear.
  • Easy Installation: Fits most 2.5-inch projectors seamlessly.
  • Stylish Upgrade: Adds a modern look to your vehicle.

20A Regular/Standard (Pack of 10)

229.00 Pack of 10

Protect your vehicle’s electrical system with the Regular Standard Fuse Kit. Featuring ATC, ATO, and APR fuses in a range of amperages, this kit is perfect for European cars and general-purpose applications.

  • Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
  • Color-Coded Design: Easy identification of fuse ratings.
  • Durable Build: Zinc alloy terminals and non-conductive plastic.
  • Wide Compatibility: Suitable for cars, trucks, SUVs, and boats.
  • Easy Installation: Standard blade design for quick replacement.

Micro Fuse APS LP Low Profile Fuse Kit – Compact Blade Fuses for Cars, Trucks, and Marine Applications

229.00 Pack of 10
Select options This product has multiple variants. The options may be chosen on the product page

Upgrade your vehicle’s electrical protection with the Micro Fuse APS LP Low Profile Fuse Kit. Compact, durable, and color-coded, these fuses are ideal for modern vehicles and marine systems.

  • Low-Profile Design: Fits tight spaces in fuse panels.
  • Wide Voltage Range: Compatible with 9V-32V systems.
  • Durable Construction: Zinc terminals and heat-resistant housing.
  • Color-Coded: Quick identification of amp ratings.
  • Versatile Use: Cars, trucks, SUVs, and boats.

Foldable Landing Gear for DJI Air 3S/Air 3

Original price was: ₹1,500.00.Current price is: ₹1,199.00. Pc

Protect your DJI Air 3S and Air 3 drone with the DJI Air 3S Landing Gear Leg Extension. This lightweight ABS accessory increases belly height by 21mm for safe take-offs/landings on uneven terrain, with quick installation and a foldable design.

  • 21mm Increased Belly Height: Safeguards gimbal and propellers.
  • Foldable Design: Easy to store and transport.
  • Quick Installation: No tools required – attach in under 10 seconds.
  • Lightweight ABS: Adds only 37g to the drone’s weight.
  • Compatibility: Designed for DJI Air 3S and Air 3.

160W H7 Tri Color Smart Bluetooth Controlled LED

Original price was: ₹7,800.00.Current price is: ₹5,299.00. 2 LEDs

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

  • High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
  • Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
  • Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
  • Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
  • Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

H8/H9/H11/H16 Canbus Decoder

Original price was: ₹900.00.Current price is: ₹699.00. Pair

Resolve LED headlight errors and flickering with the Intelligent LED Headlight Canbus Decoder. Compatible with H7, H8, H11, HB3, and H4 bulbs, this plug-and-play decoder ensures error-free performance for your vehicle’s lighting system.

  • Error-Free Operation: Eliminates dashboard warnings and flickering.
  • Wide Compatibility: Supports H7, H8, H11, HB3, H4, and cross-compatible bulb types.
  • High Power Handling: Up to 60W and 5A current.
  • Plug-and-Play: No tools or modifications needed.
  • Durable Build: High-quality plastic and copper components.