Lens Hood Gimbal Protector for DJI Mini 4 Pro

Protect your drone's lens and gimbal with the DJI Mini 4 Pro Lens Hood Anti-glare Sunshade. This lightweight, precision-designed accessory blocks stray light, enhances aerial photography, and adds 8mm of belly height for extra protection.

Anti-Glare: Blocks stray light for clearer shots.
Increased Protection: Adds 8mm belly height for gimbal and lens safety.
Precision Fit: Designed for DJI Mini 4 Pro without affecting camera rotation.
Lightweight: Weighs only 14g for portability.
Quick Installation: One-step setup for hassle-free use.

160W H8/H9/H11/H16 Tri Color Smart Bluetooth Controlled LED

Rated 5.00 out of 5

2 LEDs

Add to cart

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

Foldable Spider Landing Gear for DJI Mini 4 Pro: Take Off & Land Anywhere with Confidence

Rated 4.33 out of 5

Select options

Enhance your drone’s stability and protection with the Foldable Spider Landing Gear For DJI Mini 4 Pro. Lightweight, portable, and easy to install, it raises your drone by 30mm for safe take-offs and landings on uneven surfaces.

Spider-leg design for enhanced stability on rough terrains.
Ultra-lightweight 21g ABS construction.
30mm height increase to protect vital drone components.
One-step installation with anti-slip silicone pads.
Foldable design for portability and easy storage.

10 Pin MQB Automatic Headlight Switch for Vento Highline Plus

Upgrade to an Automatic Headlight Switch with part no. 5ND941431A for VW and Skoda models. Features integrated light sensor, three lighting modes, and OEM fit for easy plug-and-play installation.

Automatic Headlight Switch – OEM part no. 5ND941431A with light sensor.
Three Lighting Modes – Choose from Tunnel, Normal, and Delay for a custom experience.
Plug-and-Play Design – 10-pin layout for seamless fit with VW and Skoda models.
Durable Construction – ABS plastic and long 112cm cable for extended reliability.
Compatible Models – Works with select VW and Skoda vehicles for easy, hands-free headlight control.

1 Pair x H7 LED Brackets

Rated 4.67 out of 5

Upgrade your vehicle’s lighting with the H7 LED Bracket Bulb Adapter. Designed for H7 reflector-based headlights, this durable bracket ensures secure installation of LED/HID bulbs in Volkswagen, Skoda, Audi, and Mercedes models.

High-Tension Steel: Heat and corrosion-resistant for longevity.
Plug-and-Play: No modifications to stock headlights.
Wide Compatibility: Fits VW, Skoda, Audi, BMW, Mercedes.
Lightweight Design: 5g per bracket for easy handling.
Secure Fit: Keeps bulbs firmly locked in place.

1 x HS1, H4 LED for Motorcycle, Scooter

Pc

Add to cart

Upgrade your motorcycle or scooter’s lighting with the High-Performance Headlight LED for Motorcycle, Scooter. Featuring 6000K white light and 24 CSP 3570 chips, it delivers exceptional brightness and reliability for night rides.

6000K White Light: Bright, clear illumination for enhanced visibility.
24 CSP Chips: Reliable performance for low and high beams.
Plug-and-Play: Easy installation with HS1, H4, H19, and HB2/9003 connectors.
Durable Build: Aviation-grade aluminum with heat dissipation.
Error Prevention: Built-in smart chip prevents bulb-out errors.

3 x Micro Fuse Tap

Rated 4.90 out of 5

Pack

Add to cart

Power your car accessories safely with the Micro Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.

Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
High Capacity: Handles up to 32V and 30A for robust performance.
Plug-and-Play: Includes a complimentary fuse for quick installation.
Non-Invasive Design: No cutting or splicing required.
Compatibility: Works with Mini (ATM/APM) blade fuses.

Polo/Vento Auto Switch (Internal Sensor)

Rated 5.00 out of 5

Qty

Add to cart

📦 Pre-Order Notice

This product is available for pre-order with an estimated delivery time of 20-25 days from your order date.

By placing a pre-order, you'll secure your unit from our upcoming shipment and receive priority processing. Your payment will only be processed when your order is ready to ship.

We'll keep you updated throughout the process via email & whatsapp. Thank you for your patience and understanding!

Compare

Quick view

Add to wishlist

10 x 2.8mm Female Pin

Rated 5.00 out of 5

₹259.00Pack of 10

Add to cart

Upgrade your automotive wiring with the TE 962883-1 & TE 964274-2 Crimp Terminal Pair. This male and female set ensures secure, OE-standard connections for VW, Audi, BMW, and Honda vehicles.

Dual Variations: Male and female terminals sold separately (10 pieces per pack).
OE Quality: Precision fit for reliable electrical connections.
24A Rating: Handles low-power systems like audio and lighting.
Wide Compatibility: Fits Volkswagen, Audi, BMW, Honda models.
Compact Design: 2.8x0.8mm tab for exact fitment.

Orange Prop Holder Mini 4 Pro

Protect your drone's propellers and sensors with this specialized Propeller Holder for DJI Mini 4 Pro. Featuring an adjustable silicone strap and quick-release design, it ensures secure storage and transport.

Adjustable Fit: Silicone strap accommodates propeller variations.
Sensor Protection: Shields obstacle avoidance and filler lights.
Quick-Release: Effortless installation and removal.
Compact Design: Easy to carry without added bulk.
Compatibility: Designed exclusively for DJI Mini 4 Pro.

White BA15S P21W Canbus LED

Rated 4.93 out of 5

Set of 2

Add to cart

Upgrade your vehicle’s lighting with the Canbus Error Free BA15S LED P21W Bulbs. Available in Amber, Red, and White, these Canbus error-free bulbs are perfect for indicators, brake lights, and rear fog lamps.

Important Fitment & Return Notice

This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.

If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED

Please check your existing bulb type and socket before ordering.

This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.

Color Options: Amber, Red, and White for versatile applications.
Error-Free Operation: Compatible with Canbus systems.
360° Illumination: 44 curved LED chips for maximum brightness.
Energy Efficient: Consumes only 25W, outperforming halogen bulbs.
Easy Installation: Plug-and-play design for hassle-free replacement.

Trunk Handle Camera for Slavia, Virtus, Taigun, Kushaq, Vento, Rapid…

Rated 4.83 out of 5

Set

Add to cart

Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.

Wide-Angle View: 170° lens for improved rear visibility and parking ease.
Weatherproof Build: IP66–68 rated for protection against dust and water.
Easy Fit: Designed to fit factory slots with no modifications needed.
Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.

100 x Red Heat Shrinking Sleeves

Packs

Add to cart

The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.

All-in-One Solution: Combines soldering, sealing, and insulation.
IP67 Waterproof: Ensures maximum water and corrosion resistance.
High-Quality Materials: Polyolefin tubing and hot melt adhesive.
Easy to Use: No additional tools required; heat shrink technology.
Wide Compatibility: Available in multiple sizes for various wire gauges (click here).

Set of 2 PY21W BAU15S LED

Rated 4.69 out of 5

Upgrade your vehicle’s turn signals with the Bright BAU15S 1156 PY21W LED Turn Signal Lamp. Featuring Canbus error-free technology and 35 SMD LEDs, it delivers bright, reliable illumination for safer signaling.

Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.

No Hyperflash: Built-in resistors prevent rapid blinking.
No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
Plug-and-Play: Direct halogen replacement.
Durable Build: High-quality aviation grade aluminum for longevity.
Wide Compatibility: Fits BAU15S and PY21W sockets.

Anti Glare IRVM (Mount no. 8) with Reverse Camera & DIsplay for Honda City Gen (1, 2), Amaze (All gens)

Set

Add to cart

Compatibility table

Car manufacturer	Car models
Honda	City (Gen 1, 2), Amaze (till 2023), Brio, BR-V

6030F Propeller Blades for DJI Mini 4 Pro

Rated 4.00 out of 5

Set

Add to cart

Upgrade your DJI Mini 4 Pro Bladeswith durable polycarbonate blades. This complete kit ensures balanced flight, reduced noise, and easy installation.

Polycarbonate Build: Lightweight and vibration-resistant.
Full Set: Includes 8 blades, screws, and a screwdriver.
Exclusive Compatibility: For DJI Mini 4 Pro only.
Visibility: Orange-tipped blades for easy tracking.
Critical Note: Replace all four blades together.

Sort by

Price filter

Compatibility table

Newsletter Subscribe

Follow Us

All About Us

Our Policies

Useful Links

Subscribe Newsletter

Secure Payment Options

"Extra saving" when checking out using UPI.

Sort by

Price filter

FILTER BY COLOR

Filter by brand

Automotive

DJI Accessories

Compatibility table

Newsletter Subscribe

Follow Us

All About Us

Our Policies

Useful Links

Subscribe Newsletter

Secure Payment Options

"Extra saving" when checking out using UPI.