Filter by brand
- BRDRC 4
DurvientDurvient 105- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 3
- Volkswagen 18
D3S HID Ballast for Audi Skoda Volkswagen Part No. 8K0 941 597
- Material: aluminum alloy; Input Voltage: 12V; Output Voltage: 85V; Output Power: 35W; Lifetime expectancy: 2000H; Compatibility: D3S/D3R D4S/D4R; Fits: left or right headlight
- OEM Part Number : 8K0941597, 8K0941597E; Interchange Part Number : 8K0941597E, BAM92-143700, W003T20171, W003T22071
- Fits Audi, BMW, Mercedes, Volkswagen, Skoda, Lamborgini with D3S/D4S HID/Xenon Headlight
- Easy Installation : Direct Replacement, no coding/programming required
- Note: please check if the number of your previous xenon ballast is exactly the same as the number(s) stated in the listing, or through the amazonconfirmedfit to make sure weather it fit for your previous hid ballast
Plug and Play Automatic Headlight Switch For VW Polo, Vento, Ameo, Skoda Rapid and More
Upgrade your Volkswagen or Skoda with the Automatic Headlight Switch. Featuring a high-precision light sensor and plug-and-play installation, it automates headlight operation for enhanced convenience and safety.
- Plug-and-Play: No wiring modifications required.
- Light Sensor: Automatically adjusts headlights based on ambient light.
- Three Modes: Tunnel (1s), Normal (3s), and Delay (5s).
- Durable Build: High-quality ABS plastic for longevity.
- Compatible Models: VW Polo, Vento, Ameo, Skoda Rapid, and more.
1 x 2.8mm Male & Female Connector 191972712 and 191972702
Black – Polo, Vento, Ameo, Rapid, Yeti, Superb, Laura, Yeti, Fabia, Jetta
60W H4, HS1, H19 CSP3570
Upgrade your vehicle’s lighting with the 56W LED Headlight Fog Lamp. Featuring Canbus error-free technology and a 1:1 halogen design, these headlights deliver superior brightness and easy installation.
- High Brightness: 4,500 lumens for clear visibility.
- Canbus Error-Free: Compatible with 95% of vehicles.
- Plug-and-Play: No modifications required.
- Durable Build: Waterproof and weather-resistant.
- Wide Compatibility: Fits H4, H7, HB3, HB4, and more.
160W D1S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Auto Dimming IRVM for Hyundai Verna, Creta, Creta N-Line, Alcazar
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
H7 LED Bracket Bulb Adapter for Volkswagen, Skoda, Mercedes, Audi, BMW
Upgrade your vehicle’s lighting with the H7 LED Bracket Bulb Adapter. Designed for H7 reflector-based headlights, this durable bracket ensures secure installation of LED/HID bulbs in Volkswagen, Skoda, Audi, and Mercedes models.
- High-Tension Steel: Heat and corrosion-resistant for longevity.
- Plug-and-Play: No modifications to stock headlights.
- Wide Compatibility: Fits VW, Skoda, Audi, BMW, Mercedes.
- Lightweight Design: 5g per bracket for easy handling.
- Secure Fit: Keeps bulbs firmly locked in place.
PQ ISO to Quadlock Cable (With Tech Support)
Car Door Reflective Stickers – Safety Warning Reflectors for Open Doors
Enhance your vehicle’s safety with the Car Door Reflective Stickers. These high-visibility reflectors warn approaching vehicles when your car doors are open, reducing accident risks in low-light conditions.
- Enhanced Safety: Alerts drivers to open car doors.
- Multicolor Options: Available in Red, White, Yellow, and Green.
- Easy Installation: Peel-and-stick adhesive for quick setup.
- Durable Material: High-quality reflective plastic for longevity.
- Complete Coverage: Pack of 4 stickers for all car doors.
160W H7 Tri Color Smart Bluetooth Controlled LED
Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.
- High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
- Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
- Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
- Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
- Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.
P21W BA15S LED For Reverse, Indicator, Brake Lamp Canbus Error-Free, No Hyperflash, Straight/Flat Pin Spin Angle (180°) Socket
Upgrade your vehicle’s lighting with the Canbus Error Free BA15S LED P21W Bulbs. Available in Amber, Red, and White, these Canbus error-free bulbs are perfect for indicators, brake lights, and rear fog lamps.
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- Color Options: Amber, Red, and White for versatile applications.
- Error-Free Operation: Compatible with Canbus systems.
- 360° Illumination: 44 curved LED chips for maximum brightness.
- Energy Efficient: Consumes only 25W, outperforming halogen bulbs.
- Easy Installation: Plug-and-play design for hassle-free replacement.
Grey Joystick for RC2, RC1/Smart RC
Upgrade your DJI controller with the Remote Control Rocker Joystick for DJI RC, RC2, RC Pro. These CNC precision aluminum thumbsticks offer enhanced control, durability, and comfort for DJI Mini 3, Mini 4 Pro, Air 3, and Mavic 3 controllers.
- Precision CNC Design: High-quality aluminum for superior control.
- Anti-Skid Knurling: Secure grip for precise navigation.
- Rustproof Durability: CNC anodized aluminum for long-lasting use.
- Perfect Fit: Compatible with DJI Smart RC1 and RC2 controllers.
- Lightweight and Portable: Easy to carry without compromising quality.
BAU15S 150° Switchback LED Indicator + DRL
OEM 2-Pin Connector Part No. 191 972 712 and 191 972 702 For Audi, VW, Skoda
VW 2 Pin connector part numbers 191 972 712 and 191 972 702. Restore your VAG vehicle’s electrical systems with the OEM 2-Pin 2.5mm Connector. Designed for Audi, VW, Skoda, and Seat, this durable plug ensures reliable connections for sensors, lights, and more.
- OEM Fit: Replaces part numbers 191972712 and 191972702.
- Tin-Plated Copper: Resists oxidation for stable conductivity.
- Easy Installation: Crimp or solder-free setup.
- Wide Application: Sensors, lights, speakers, injectors.
- 14V/10A Rating: Safe for critical electrical systems.
160W D2S/D2R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.