Filter by brand
- BRDRC 4
DurvientDurvient 104- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 4
- TE Connectivity 3
- Volkswagen 15
160W D5S D Series HID to LED Kit 4300K Warm White
In stock
This product is a D-Series LED replacement for D5S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
150W H3 4300K Warm White
In stock
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
160W H4 Tri Color Smart Bluetooth Controlled LED
In stock
Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.
- High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
- Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
- Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
- Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
- Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.
Automatic DRL Controller Module
In stock
Upgrade your car’s lighting with the Smart Automatic LED DRL Controller. This plug-and-play relay automatically manages DRLs, offering features like dimming and voltage sensing for enhanced safety and efficiency.
- Automatic Activation: Turns on DRLs when battery voltage exceeds 13V.
- Delayed Deactivation: DRLs turn off 2-2.5 minutes after engine shutdown.
- Optional Dimming: Connect to headlights for reduced brightness at night.
- Plug-and-Play: Easy installation with no cutting or splicing.
- Safety Protection: Includes an inline fuse for added security.
White T10/T15 LED
In stock
Upgrade your vehicle’s lighting with the W5W W16W Canbus T10 T15 Canbus LED Bulbs. Featuring 26 double-sided 4014 LED chips, these bulbs deliver intense brightness, energy efficiency, and error-free operation for a variety of automotive lighting needs.
- High-Intensity Illumination: 26 LED chips for superior brightness.
- Error-Free Design: Built-in resistors eliminate Canbus errors.
- Energy Efficient: Consumes only 5 watts per bulb.
- Compact Size: Fits standard automotive light housings.
- Versatile Use: Ideal for parking, cabin, and license plate lights.
- NOTE: Please ensure that the light housing has a minimum clearance of 26mm from the socket to accommodate the fitment of this long LED.
7.5A Regular/Standard Fuse (Pack of 10)
In stock
Protect your vehicle’s electrical system with the Regular Standard Fuse Kit. Featuring ATC, ATO, and APR fuses in a range of amperages, this kit is perfect for European cars and general-purpose applications.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy identification of fuse ratings.
- Durable Build: Zinc alloy terminals and non-conductive plastic.
- Wide Compatibility: Suitable for cars, trucks, SUVs, and boats.
- Easy Installation: Standard blade design for quick replacement.
W21W T20 DRL White
In stock
Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
Easy to Install Error-Free Dual Color Switchback LED DRL Indicator – White & Amber Turn Signal BAU15S PSX24W T20
In stock
Upgrade your vehicle's lighting with the Error-Free Dual Color Switchback LED DRL Indicator. Combines bright white DRL lights and amber turn signals with built-in resistors for canbus error-free operation. Enhance safety, style, and convenience with automatic white-to-yellow switchback functionality.
- Dual Functionality: White DRL switches to amber turn signal automatically.
- Built-in Resistor: Prevents hyper-flashing and ensures compatibility.
- Plug-and-Play Installation: Easy to install with minimal modifications.
- High-Intensity LEDs: Equipped with 42 SMD LEDs (21 white, 21 amber) for superior brightness.
- Versatile Compatibility: Fits PY21W, WY21W, PS24W, PSY24W connectors, and more.
Auto Dimming IRVM for Maruti Jimny, Celerio
In stock
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Cruise Control Wiring Harness for Volkswagen Skoda Cars (PQ25)
In stock
PQ25 Cruise Control Harness – Complete wiring solution for retrofitting cruise control to VW Polo, Vento, Ameo, Jetta, and Skoda Fabia, Rapid. Requires compatible combination switch (6RA 953 513G) and BCM 6R0 937 087 or higher.
- Vehicle Platform: PQ25 (VW, Skoda)
- Required BCM: 6R0 937 087 or higher
- Compatible Switch: 6R0 953 521C/6RA 953 513G/6RA 953 513G
- Functions: SET, ACCELERATE, DECELERATE, RESUME
- Coding Required: VCDS / Diagnostic interface 38772
WARNING: We are supplying only the required part. Installation support or technical guidance is not included. Any information provided in this post is intended solely for reference purposes. It is the customer’s responsibility to verify compatibility, required tools, installation procedure, and correct fitment before proceeding.
2 x Footwell Lamp Bracket
In stock
Enhance your Volkswagen, Skoda, or Audi’s interior with the OEM Footwell Light Holder for VAG models. Designed for seamless installation in various locations, this holder fits perfectly, providing secure placement for your vehicle’s lighting needs.
- OEM bracket for easy footwell light installation in VAG vehicles
- Compatible with VAG light assemblies: 3B0 972 712, 3TD 947 565
- Fits under driver, co-driver seats, and boot for versatile lighting
- Durable ABS plastic construction, designed for long-lasting use
- Ideal for Volkswagen, Skoda, and Audi models
160W H4 Tri Color Smart Bluetooth Controlled LED
In stock
Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.
- High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
- Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
- Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
- Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
- Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.
Auto Dimming IRVM for Mahindra XUV300, 3XO, Alturas
In stock
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Auto Dimming IRVM for Honda City (Gen 5, 6), Elevate with ADAS
In stock
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
H19 Canbus Decoder
In stock
Resolve LED headlight errors and flickering with the Intelligent LED Headlight Canbus Decoder. Compatible with H7/H18, H8, H11, HB3, and H4/H19 bulbs, this plug-and-play decoder ensures error-free performance for your vehicle’s lighting system.
- Error-Free Operation: Eliminates dashboard warnings and flickering.
- Wide Compatibility: Supports H7/H18, H8, H11, HB3, H4/H19/HS1, and cross-compatible bulb types.
- High Power Handling: Up to 60W and 5A current.
- Plug-and-Play: No tools or modifications needed.
- Durable Build: High-quality plastic and copper components.
OEM 2-Pin Connector Part No. 191 972 712 and 191 972 702 For Audi, VW, Skoda
In stock
VW 2 Pin connector part numbers 191 972 712 and 191 972 702. Restore your VAG vehicle’s electrical systems with the OEM 2-Pin 2.5mm Connector. Designed for Audi, VW, Skoda, and Seat, this durable plug ensures reliable connections for sensors, lights, and more.
- OEM Fit: Replaces part numbers 191972712 and 191972702.
- Tin-Plated Copper: Resists oxidation for stable conductivity.
- Easy Installation: Crimp or solder-free setup.
- Wide Application: Sensors, lights, speakers, injectors.
- 14V/10A Rating: Safe for critical electrical systems.
