Filter by brand
- BRDRC 4
DurvientDurvient 116- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 3
- Volkswagen 18
OBD 1 (Male) to 2 (Female) Splitter Cable
Upgrade your vehicle’s OBD II port with the Low Profile OBD Splitter Cable. This dual-port extension enables multi-device connectivity for diagnostics, tracking, and security systems, all while protecting your factory port.
- Dual-Port Design: Split data and power connections effortlessly.
- Angled Connector: Low-profile design for tight spaces.
- Durable Construction: Copper wiring and rugged plastic housing.
- Universal Fit: Compatible with all 16-pin OBD II vehicles.
- Easy Setup: Plug-and-play installation in seconds.
White T15 W16W for Reverse
Upgrade your vehicle’s lighting with the Canbus Error Free T15 W16W/WY16W LED Bulb. Featuring 360° illumination and no hyperflash, this bulb is perfect for turn signals, reverse lights, and parking lights.
- Canbus Error-Free: Prevents dashboard warnings and hyperflashing.
- 360° Illumination: Ensures visibility from all angles.
- Energy Efficient: 9W power consumption for reduced energy use.
- Plug-and-Play: Matches halogen bulb size for easy installation.
- Durable Cooling: Aluminum heat sink for extended lifespan.
- Wide Compatibility: Compatible with 90% of the vehicles without Error and hyper flashes.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
Set of 4 PY21W BAU15S LED
Upgrade your vehicle’s turn signals with the Bright BAU15S 1156 PY21W LED Turn Signal Lamp. Featuring Canbus error-free technology and 35 SMD LEDs, it delivers bright, reliable illumination for safer signaling.
Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.
- No Hyperflash: Built-in resistors prevent rapid blinking.
- No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality aviation grade aluminum for longevity.
- Wide Compatibility: Fits BAU15S and PY21W sockets.
Soft Silicone Cover for DJI RC2 Remote Controller – Compatible with DJI Air 3S, Air 3, Flip, Mini 4 Pro, Mini 3 Pro, and Mavic 3
Protect your DJI RC2 Smart Controller with the Soft Silicone Cover for DJI RC2. Compatible with DJI Air 3S, Air 3, Flip, Mini 4 Pro, Mini 3 Pro, and Mavic 3, this lightweight and durable silicone sleeve offers a non-slip grip and full protection against dust, dirt, and accidental drops.
- Premium Protection: Shields the DJI RC2 controller from dust, dirt, and accidental drops.
- Non-Slip Grip: Soft silicone texture ensures a comfortable and secure hold.
- Lightweight and Durable: Easy to clean and resistant to deformation.
- Precision Design: Custom fit with exact cutouts for full functionality.
- Universal Compatibility: Designed for DJI Flip, Air 3S, Air 3, Mini 4 Pro, Mini 3 Pro, and Mavic 3.
7" Android Stereo for Volkswagen Skoda Cars (4GB+64GB)
Upgrade your Volkswagen or Skoda with this 7" Android Car Stereo. Features wireless CarPlay, Android Auto, 4GB RAM, and optional 1080P backup camera.
- Android 13: 4GB RAM + 64GB ROM for fast performance.
- Wireless Connectivity: Wired and Wireless CarPlay, Android Auto, BT 5.4.
- OEM Fit: Retains steering controls and factory amp.
- Backup Camera Ready: 1080P AHD input (not included, can be bought here).
Front & Rear Footwell Kit for VW Skoda
Upgrade your Volkswagen or Skoda’s interior with the OEM Front and Rear Footwell Kits. These kits add ambient lighting to your car’s footwells, enhancing visibility and style. Designed for easy DIY installation, they include halogen bulbs (upgradable to T10 LEDs) and pre-wired harnesses for a seamless setup.
- OEM Quality: Genuine part No. 5GG 947 409 ensures reliability.
- Front & Rear Options: Choose between front-only or front+rear lighting.
- Wide Compatibility: Fits Volkswagen Polo, Vento, Ameo, Skoda Rapid, Slavia, and more.
- DIY-Friendly: Includes pre-wired harnesses and OE connectors.
- LED-Upgradable: Swap halogen bulbs for T10 LEDs for brighter lighting. Grab LED from here
- Complete Kits: Comes with lights, harnesses, and fuse taps (only with front footwell).
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
OBD II Extension Cable Angled Connector, 30 CM
The 30 CM OBD II Extension Cable offers effortless connectivity for diagnostic tools and GPS trackers. Its flat ribbon design and 90-degree angle ensure durability and flexibility for tight installations.
- 16-pin male-to-female connector for OBD II devices.
- Flat, ribbon-like cable for easy routing.
- Supports all OBD II protocols, including CAN.
- 90-degree angle reduces wear on ports and tools.
- Compact 30 CM length perfect for tight spaces.
Reverse Camera Delay Timer Module
Fix reverse camera errors on your VW or Skoda with the RCA Delay Timer Module, Relay Camera Filter. This plug-and-play module stabilizes voltage and adds a 10-second delay for seamless compatibility with RCD/MIB systems.
- 10-Second Delay: Keeps camera active post-reverse gear.
- Stable 12V Output: No flickering or blank screens.
- Wide Compatibility: Works with RCD330, MIB, Polo, Vento, Rapid, and more.
- Tool-Free Install: Connects in minutes with standard plugs.
- Durable Design: ABS and copper construction.
Red BA15S P21W Canbus LED
Upgrade your vehicle’s lighting with the Canbus Error Free BA15S LED P21W Bulbs. Available in Amber, Red, and White, these Canbus error-free bulbs are perfect for indicators, brake lights, and rear fog lamps.
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- Color Options: Amber, Red, and White for versatile applications.
- Error-Free Operation: Compatible with Canbus systems.
- 360° Illumination: 44 curved LED chips for maximum brightness.
- Energy Efficient: Consumes only 25W, outperforming halogen bulbs.
- Easy Installation: Plug-and-play design for hassle-free replacement.
DJI RC Premium Lanyard
Keep your DJI controller secure and comfortable with the Premium Neck Strap. Designed for DJI RC, RC2, and RC Pro, this adjustable lanyard reduces hand fatigue and ensures worry-free flying.
- Adjustable Length: Customizable from 125 to 160 cm.
- Secure Hook Buckle: Zinc alloy clasp for reliable attachment.
- Comfortable Design: Soft nylon webbing and PU suede.
- Easy Installation: Includes screws with silicone gaskets.
- Wide Compatibility: Works with DJI RC, RC2, RC Pro, and more.
Front Footwell Kit for VW Skoda
Premium Ultra Compact T10 Canbus LED Bulb – W5W WY5W Halogen Replacement for Automotive Lighting
Upgrade your vehicle’s lighting with the Ultra-Compact T10 Canbus LED Bulbs. These error-free, energy-efficient bulbs are perfect for replacing halogens in cabin lighting, license plates, and parking lights.
- Canbus Error-Free: No flickering or dashboard warnings.
- Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
- Plug-and-Play: Matches halogen size (9x23mm).
- Multi-Use: Ideal for interiors, license plates, and more.
- Energy Saver: Uses 80% less power than halogens.
20A Micro2 Fuse (Pack of 10)
Replacement Micro2 Fuse Kit: Perfect for protecting your vehicle's electrical system, this kit includes fuses compatible with cars, trucks, motorcycles, and more. Easy to use and color-coded for quick recognition, it ensures safe operation in case of overloads or short circuits.
- Multiple Amp Ratings: Available in 5A, 7.5A, 10A, 15A, 20A, 25A, and 30A
- Wide Compatibility: Fits cars, vans, trucks, motorcycles, boats, and more
- Durable Build: High-quality plastic cover for thermal and electrical protection
- Simple Installation: Standard blade fuses for easy replacement and backup
- Color-Coded: For quick identification of the correct fuse rating
Laura (Manual AC) Stereo Frame Fascia
Upgrade your Skoda’s stereo system with the Double Din Facia RCD Stereo Frame. Designed for Skoda Yeti, Laura, and Octavia models, this facia ensures a seamless fit for RCD330, RCD340, RCD360, and RCD880 head units.
- Compatibility: Upgrades RCD510/Swing/Bolero to modern multimedia systems.
- Perfect Fit: Seamlessly integrates with your dashboard.
- Durable ABS Plastic: Resists wear and maintains a sleek look.
- Tool-Free Installation: No modifications required.
- Sleek Design: Black/silver finish enhances your car’s interior.
2 x Footwell Lamp Bracket
Enhance your Volkswagen, Skoda, or Audi’s interior with the OEM Footwell Light Holder for VAG models. Designed for seamless installation in various locations, this holder fits perfectly, providing secure placement for your vehicle’s lighting needs.
- OEM bracket for easy footwell light installation in VAG vehicles
- Compatible with VAG light assemblies: 3B0 972 712, 3TD 947 565
- Fits under driver, co-driver seats, and boot for versatile lighting
- Durable ABS plastic construction, designed for long-lasting use
- Ideal for Volkswagen, Skoda, and Audi models
160W D1S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.