Sort by
FILTER BY COLOR
Filter by brand
- BRDRC 4
DurvientDurvient 114
- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 1
- Volkswagen 17
72W H7, H18 6000K Headlight LED
9W Red T15 W16W for Tail/Parking Light
- 48x 2016 SMD LEDs: Brighter and more efficient than traditional LEDs.
- Canbus Error-Free: No hyperflashing or dashboard warnings.
- 360° Illumination: Ensures visibility from all angles.
- Plug-and-Play: Direct replacement for T15 W16W/WY16W halogen bulbs.
- Durable Cooling: Thick aluminum heat sink for extended lifespan.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
5A Micro Fuse (Pack of 10)
- Low-Profile Design: Fits tight spaces in fuse panels.
- Wide Voltage Range: Compatible with 9V-32V systems.
- Durable Construction: Zinc terminals and heat-resistant housing.
- Color-Coded: Quick identification of amp ratings.
- Versatile Use: Cars, trucks, SUVs, and boats.
150W H8, H9, H11, H16 4300K Warm White
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
Red T10 W5W LED
- Canbus Error-Free: No flickering or dashboard warnings.
- Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
- Plug-and-Play: Matches halogen size (9x23mm).
- Multi-Use: Ideal for interiors, license plates, and more.
- Energy Saver: Uses 80% less power than halogens.
HB3/HB4 Canbus Decoder
- Error-Free Operation: Eliminates dashboard warnings and flickering.
- Wide Compatibility: Supports H7, H8, H11, HB3, H4, and cross-compatible bulb types.
- High Power Handling: Up to 60W and 5A current.
- Plug-and-Play: No tools or modifications needed.
- Durable Build: High-quality plastic and copper components.
Set of 2 PY21W BAU15S LED
Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.
- No Hyperflash: Built-in resistors prevent rapid blinking.
- No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality aviation grade aluminum for longevity.
- Wide Compatibility: Fits BAU15S and PY21W sockets.
OEM Footwell Light Holder for Volkswagen, Skoda, Audi | Front & Rear Footwell Bracket Part no. 5HG947307
- OEM bracket for easy footwell light installation in VAG vehicles
- Compatible with VAG light assemblies: 3B0 972 712, 3TD 947 565
- Fits under driver, co-driver seats, and boot for versatile lighting
- Durable ABS plastic construction, designed for long-lasting use
- Ideal for Volkswagen, Skoda, and Audi models
10A Mini Fuse (Pack of 10)
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy to identify and replace.
- Durable Materials: Zinc alloy and non-conductive plastic.
- Wide Compatibility: Fits Volkswagen, Audi, BMW, Mercedes, and more.
- Secure Storage: Includes a labeled storage box.
144 LED White BA15S
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- 21-25W Efficiency: Brighter than halogen, prevents dashboard errors.
- Error-Free Design: Built-in resistor prevents hyper-flashing.
- Dual Colors: White for reverse lights, Amber for brakes/indicators.
- Plug-and-Play: Direct replacement for halogen bulbs.
Front & Rear Footwell Kit for VW Skoda
- OEM Quality: Genuine part No. 5GG 947 409 ensures reliability.
- Front & Rear Options: Choose between front-only or front+rear lighting.
- Wide Compatibility: Fits Volkswagen Polo, Vento, Ameo, Skoda Rapid, Slavia, Kushaq, and more.
- DIY-Friendly: Includes pre-wired harnesses and OE connectors.
- LED-Upgradable: Swap halogen bulbs for T10 LEDs for brighter lighting. Grab LED from here
- Complete Kits: Comes with lights, harnesses, and fuse taps (only with front footwell).
10 x Yellow T-Tap Connector
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
LED Mini Projector Headlight/Fog Lamp H8/H11/H16 – 55W (110W a pair) Plug and Play Upgrade for Cars and Bikes
- Easy plug-and-play installation with no modifications required.
- Sharp LHD projector-style light beam for focused illumination.
- IP65 rated for dust and waterproof performance.
- Compact design compatible with H8/H9/H11, H16 sockets.
- Advanced cooling with aviation-grade turbo fan and thermal system.
3″ Round DRL Projector Shroud
- Integrated DRL: Bright and efficient Angel Eye design.
- Multiple Styles: Choose from Rectangle, Boxy, or Round.
- Durable Build: Resistant to high temperatures and wear.
- Easy Installation: Fits most 3-inch projectors seamlessly.
- Stylish Upgrade: Adds a modern look to your vehicle.
Regular Standard Fuse Tap ATO ATC APR Upto 30A Fuse Tap – Splice Free Accessory Connector In European Cars
- Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
- High Capacity: Handles up to 32V and 30A for robust performance.
- Plug-and-Play: Includes a complimentary fuse for quick installation.
- Non-Invasive Design: No cutting or splicing required.
- Wide Compatibility: Works with Volkswagen, Skoda, Audi, BMW, Mercedes, and more.
Fog Spotlight Fork Mount for Motorcycles 20-38mm (Pack of 2)
- Size Options: Choose 20-38mm or 38-60mm clamps for the perfect round bar fit
- 360° Adjustable: 360° rotatable and adjustable for precise lighting angles,
- Anodized Aluminum: Hard-anodized aluminum alloy resists rust and wear.
- Easy to Install:Easy clamp-on installation with basic tools, no drilling or modification.
- Includes: 2 x brackets, 4 x long screws, 2 x M10 screws, 2 x Spring Washer.











