Filter by brand
- BRDRC 4
DurvientDurvient 116- Honda 1
- Konnwei 3
- Mitsubishi 1
- Startrc 2
- Sunnylife 5
- TE Connectivity 1
- Volkswagen 17
DJI Air 3S Air 3 Blades
Upgrade your DJI Air 3 Air 3S Propeller Blades with the 8747F Replacement Propeller Blades. These low-noise, quick-release blades are designed for enhanced performance and durability.
- Low-Noise Design: Reduces operational sound for quieter flights.
- Quick-Release Mechanism: Tool-free installation and removal.
- Durable Polycarbonate: Lightweight and resistant to wear.
- High Visibility: Orange tips for better tracking.
- Compatibility: Designed for DJI Air 3 and Air 3S.
6030F Propeller Blades for DJI Mini 4 Pro
Upgrade your DJI Mini 4 Pro Bladeswith durable polycarbonate blades. This complete kit ensures balanced flight, reduced noise, and easy installation.
- Polycarbonate Build: Lightweight and vibration-resistant.
- Full Set: Includes 8 blades, screws, and a screwdriver.
- Exclusive Compatibility: For DJI Mini 4 Pro only.
- Visibility: Orange-tipped blades for easy tracking.
- Critical Note: Replace all four blades together.
Bright 35 LED Cross Pin BAU15S PY21W LED Turn Signal Canbus Error-Free, No Hyperflash
Upgrade your vehicle’s turn signals with the Bright BAU15S 1156 PY21W LED Turn Signal Lamp. Featuring Canbus error-free technology and 35 SMD LEDs, it delivers bright, reliable illumination for safer signaling.
Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.
- No Hyperflash: Built-in resistors prevent rapid blinking.
- No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality aviation grade aluminum for longevity.
- Wide Compatibility: Fits BAU15S and PY21W sockets.
Dual-Color Spotlight Waterproof Auxiliary Light for Cars, Motorbikes, ATVs, and 4x4s – High-Performance Spotlight
Upgrade your vehicle's lighting with the Dual-Color Spotlight Waterproof LED Auxiliary Light. Featuring white and yellow beams, IP68 waterproof rating, and universal compatibility, this high-performance spotlight ensures safety and visibility in all weather conditions.
- Dual-color illumination: Switch between white and yellow beams.
- IP68 waterproof rating for all-weather durability.
- High-performance 2400 Lumen output with bifocal lens design.
- Universal compatibility with 9-15V DC vehicles.
- Easy installation with adjustable mounting bracket.
Sunshade for DJI RC-N1/2/3
Enhance your DJI RC remote experience with the RC Protector Sun Hood for DJI RC-N1/N2/N3. This 2-in-1 accessory reduces glare, protects your screen and joysticks, and is compatible with DJI RC-N1, N2, and N3 controllers.
- Anti-Glare Design: Improves screen visibility in bright sunlight.
- 2-in-1 Functionality: Sunshade and joystick guard in one.
- Durable ABS Material: Lightweight and long-lasting.
- Easy Installation: Includes an Allen key for quick installation.
- Compact Storage: No need to disassemble for storage.
ISO to MQB Quadlock Connector Cable For Plug-and-Play Upgrade for RCD360 Pro, Discover Media & MIB Systems
Upgrade your Volkswagen’s infotainment system effortlessly with the ISO to MQB Quadlock Connector Cable. This plug-and-play adapter ensures seamless compatibility with RCD360 Pro, Discover Media, and MIB systems.
- Plug-and-Play: No wiring modifications needed.
- High Compatibility: Supports RCD360 Pro, Discover Media, and MIB.
- Durable Build: ABS housing and copper wiring for reliability.
- Extendable Canbus: Flexible installation for complex setups.
- Lossless Signal: Crisp audio and stable connectivity.
Amber T15 WY16W for Indicators
Upgrade your vehicle’s lighting with the Canbus Error Free T15 W16W/WY16W LED Bulb. Featuring 360° illumination and no hyperflash, this bulb is perfect for turn signals, reverse lights, and parking lights.
- Canbus Error-Free: Prevents dashboard warnings and hyperflashing.
- 360° Illumination: Ensures visibility from all angles.
- Energy Efficient: 9W power consumption for reduced energy use.
- Plug-and-Play: Matches halogen bulb size for easy installation.
- Durable Cooling: Aluminum heat sink for extended lifespan.
- Wide Compatibility: Compatible with 90% of the vehicles without Error and hyper flashes.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
150W D3S/D3R D8S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D3S/R, D8S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Trunk Handle Camera for Octavia, Tiguan, Q3, Q4…
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
Mount #9 Maruti XL6, Ertiga Dzire, Ignis Toyota Rumion
10 x Red T-Tap Connectors
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
150W D5S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D5S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Folding Heated ORVM Switch for Polo Vento Ameo
OEM Mirror Adjustment Switch - Heated, Folding Compatible, Red Backlit
- Direct Replacement: Plug & play for Gen2/Gen3 Polo, Vento, Ameo with folding mirrors.
- Heated Mirror Ready: Activates heated mirror feature if enabled in BCM.
- Red Backlight: Clearly visible at night.
- Easy Fit: No wiring or coding for basic install.
- Includes: 1 mirror adjustment switch.
H4 Mini Projector With Sharp Cut-Out 35W H4, HS1, H19 6000K White, 300% Brighter for Cars & Motorcycles
The H4 Mini Projector LED Headlight offers sharp cut-out beam control, bright 6000K light, and a long lifespan. Compatible with cars and motorcycles, it’s a reliable upgrade for superior visibility.
- 300% Brighter Than Halogen Bulbs: 35W power with CSP chips ensures exceptional brightness.
- Sharp Beam Cut-Off: Avoids glare for oncoming drivers.
- Efficient Heat Dissipation: Aviation-grade aluminum housing and cooling fan extend lifespan.
- Easy Installation: Plug-and-play design for H4/HS1/H19 sockets.
- Durable and Waterproof: IP65 rating ensures performance in all weather conditions.
Step-by-Step installation guide available here: Teambhp, courtesy: Atharva M.
Propeller Blades for DJI Mini 3, Lito 1, Lito X1 (not Mini 3 Pro)
Upgrade your drone with high-performance polycarbonate Blades for DJI Mini 3, Lito 1, Lito X1. Made from lightweight polycarbonate, they offer quieter flights, improved efficiency, and exclusive compatibility.
- Aerodynamic Design: 6030F specification for smoother, quieter flights.
- Lightweight: Each blade weighs only 0.9g for minimal drone load.
- Durable Material: Made of premium polycarbonate (PC) for longevity.
- Complete Set: Includes 8 blades, screws, and a screwdriver.
- Exclusive Compatibility: Designed for DJI Lito 1, Lito X1, Mini 3 (not for Mini 3 Pro).