Shop - Durvient®

BAU15S PY21W Cross Pin Orange Indicator LED

Rated 5.00 out of 5

Set of 2

Add to cart

Upgrade your turn signal system with this PY21W BAU15S LED bulb, offering 360° illumination, error-free performance, and no hyperflash.

Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.

Canbus error-free PY21W BAU15S LED Turn Signal Indicator.
360° illumination with vibrant amber light.
Energy-efficient 44 curved 3030 LED chips.
Plug-and-play installation for cars and motorcycles.
Prevents hyperflashing on most cars and ensures a smooth signal operation.

-17%

Mount #7 Astor, XUV300, 3X0, Hector, Hyundai

Rated 4.98 out of 5

Set

Add to cart

Compatibility table

Car manufacturer	Car models
MG Motors	Astor, ZS-EV, Hector
Mahindra	XUV300/Tivoli, Alturas, 3XO
Hyundai	EON, i20 (before 2014, verification needed)

-20% Sold out

Silicon Propeller Holder for DJI Air 3S/Air 3

Rated 5.00 out of 5

Protect your drone propeller holder for DJI Air 3s, Air 3 with the Soft Silicone Propeller Holder. This lightweight, quick-lock accessory prevents scratches and deformation during storage and transport.

Precise Fit: Designed exclusively for DJI Air 3.
Soft Silicone: Protects blades from scratches and collisions.
Quick-Lock Design: Easy to install and remove.
Lightweight: Adds minimal weight to your drone.
Stylish Grey: Complements the DJI Air 3’s design.

-29%

T15 W16W/WY16W Canbus Error-Free LED Bulb – 2016 SMD LEDs, 360° Illumination, Plug-and-Play

Rated 5.00 out of 5

Set of 2

Select options

Upgrade your vehicle’s lighting with the T15 W16W/WY16W Canbus Error-Free LED Bulb. Featuring 48 advanced 2016 SMD LEDs, it delivers bright, energy-efficient illumination for turn signals, reverse lights, and parking lights.

48x 2016 SMD LEDs: Brighter and more efficient than traditional LEDs.
Canbus Error-Free: No hyperflashing or dashboard warnings.
360° Illumination: Ensures visibility from all angles.
Plug-and-Play: Direct replacement for T15 W16W/WY16W halogen bulbs.
Durable Cooling: Thick aluminum heat sink for extended lifespan.
Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).

-23%

Motorcycle Fog Lamp Mount Brackets – Adjustable 20-38mm or 38-60mm Aluminum Clamps for Fog Lights, ATV, UTV (Pack of 2)

Rated 5.00 out of 5

Pack of 2

Select options

Universal Motorcycle Fog Lamp Mount, Heavy-duty aluminum clamps for fog lights, spotlights, or LED bars.

Size Options: Choose 20-38mm or 38-60mm clamps for the perfect round bar fit
360° Adjustable: 360° rotatable and adjustable for precise lighting angles,
Anodized Aluminum: Hard-anodized aluminum alloy resists rust and wear.
Easy to Install:Easy clamp-on installation with basic tools, no drilling or modification.
Includes: 2 x brackets, 4 x long screws, 2 x M10 screws, 2 x Spring Washer.

-20% Sold out

2 Pin Pigtail Connector for Volkswagen Skoda Audi Part no. 1J0 973 802

The VAG Pigtail Connector 1J0973802 provides secure and reliable electrical connections for Audi, VW, Skoda, and Seat vehicles. This OEM-style connector is perfect for accessories like fuel injectors, horns, and washers.

OEM part number 1J0 973 802 for perfect compatibility.
Secure 2-pin female connector for VAG cars.
Includes 5-inch pre-configured wire harness for easy installation.
Eliminates loose connections and fire hazards.
Supports up to 100W, 12V for optimal performance.

OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.

-23%

Canbus Error-Free White DRL LED for Daytime Running Lights – Build to Order (Only DRL, 🚫 No Indicator)

Set of 2

Select options

Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.

Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
Durable & Efficient: Long-lasting construction with minimal power draw.
Easy Installation: Rubber grommet and plug-and-play design for seamless setup.

-29% Sold out

Solid Performance Canbus ErrorFree P21W BA15S LED Flat Pin Auto Lamp for Cars & Motorcycles

Rated 5.00 out of 5

Select options

Upgrade your vehicle's lighting with the P21W BA15S 1156 LED Bulb—designed for bright, error-free performance.

Canbus Error-Free Design: Built-in resistor prevents hyperflashing for seamless operation.
Energy Efficient: Consumes less than 15W compared to traditional 21W halogen bulbs.
Bright Illumination: Equipped with 35 premium SMD LED chips for superior lighting performance.
Plug-and-Play Installation: Matches the size of halogen bulbs for easy, modification-free installation.
Wide Compatibility: Suitable for brake, reverse, fog, and parking lights in cars, bikes, and trucks.

durvient dji mini 5 pro m5p folding landing gear for dji mini 5 pro legs height extension

-41%

Folding Landing Gear for DJI Mini 5 Pro

Add to cart

Foldable Extended Landing Gear for DJI Mini 5 Pro – Raises your drone by 25mm to keep it clean and protected on rough ground. Snaps on without tools and folds for easy storage.

25mm Lift: Keeps camera and sensors away from dirt, sand, and water
Tool-Free: Quick-release snap-on design
Lightweight: Only 24g – minimal impact on flight
Foldable: Compact for travel and storage

-22% Sold out

PQ ISO to Quadlock Cable (With Tech Support)

Rated 4.80 out of 5

Tech support and cable/connector included. Tech support Fee is non-refundable, and is limited to a maximum of 15 minutes of support, available for one-time use only. Support is provided via Call or Chat.

-11% Sold out

Set of 2 PY21W BAU15S LED

Rated 4.69 out of 5

Upgrade your vehicle’s turn signals with the Bright BAU15S 1156 PY21W LED Turn Signal Lamp. Featuring Canbus error-free technology and 35 SMD LEDs, it delivers bright, reliable illumination for safer signaling.

Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.

No Hyperflash: Built-in resistors prevent rapid blinking.
No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
Plug-and-Play: Direct halogen replacement.
Durable Build: High-quality aviation grade aluminum for longevity.
Wide Compatibility: Fits BAU15S and PY21W sockets.

3CN 868 243 door trim clip for slavia kushaq virtus taigun kylaq part no. 3CN868243

-25%

Door Trim Ciip for VW Skoda Part no. 3CN868243

Rated 5.00 out of 5

Pack of 10

Add to cart

Door Trim Clip Panel Retainer (Part no. 3CN868243) For VW, Audi, Skoda

OEM Fit: Direct replacement for 3CN868243 on Volkswagen, Skoda, and Audi.
Durable Nylon Construction: Flexible, wear-resistant for daily use.
Integrated Sealer: Improves grip and reduces vibration or rattle.
Easy Install: Push-fit design suitable for 8mm holes - no special tools needed.
Pack Includes: 10 clips for front/rear door or quarter panel trim.

-31%

Waterproof Heat Shrink Solder Sleeve Connector for Cable Insulation Wire Connector (Different Sizes)

Packs

Select options

The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.

All-in-One Solution: Combines soldering, sealing, and insulation.
IP67 Waterproof: Ensures maximum water and corrosion resistance.
High-Quality Materials: Polyolefin tubing and hot melt adhesive.
Easy to Use: No additional tools required; heat shrink technology.
Wide Compatibility: Available in multiple sizes for various wire gauges (click here).

-50%

Black – Style D (match the key fob design)

Rated 5.00 out of 5

Set

Add to cart

Match your key fob before placing an order

-24% Hot

Lanyard for DJI RC2/RC1/RC Pro Smart Remote Controllers

Rated 4.80 out of 5

Set

Add to cart

Upgrade your drone setup with the DJI Smart RC Neck Strap Lanyard. Featuring adjustable length and universal compatibility, it ensures hands-free convenience and secure controller handling for DJI Mini 4 Pro, Air 3, and Mavic 3.

Adjustable Length: 76 cm to 140 cm for a customized fit.
Premium Build: Silk nylon and stainless steel for durability.
Universal Compatibility: Fits DJI Smart RC, RC2, and RC Pro.
C-Type Ring: Easy storage without disassembly.
Lightweight Design: Reduces neck strain during long flights.