Shop - Durvient®

150W D2S/D2R D Series HID to LED Kit 4300K Warm White

Rated 5.00 out of 5

⚠️ D2S/D2R HID to LED Conversion Notice

This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

7 inch oem style android stereo for volkswagen and skoda cars without camera

-20% Sold out

7" Android Stereo for Volkswagen Skoda Cars (4GB+64GB)

Rated 4.86 out of 5

Upgrade your Volkswagen or Skoda with this 7" Android Car Stereo. Features wireless CarPlay, Android Auto, 4GB RAM, and optional 1080P backup camera.

Android 13: 4GB RAM + 64GB ROM for fast performance.
Wireless Connectivity: Wired and Wireless CarPlay, Android Auto, BT 5.4.
OEM Fit: Retains steering controls and factory amp.
Backup Camera Ready: 1080P AHD input (not included, can be bought here).

-18%

Polo/Vento/Rapid Anti-Glare ORVM Mirror Glass (Type1 2010-2014)

Rated 5.00 out of 5

Set

Add to cart

For Type 1 Polo/Vento/Rapid/Fabia with Side Indicators on the Fender and wider ORVM

-31%

160W H4 Tri Color Smart Bluetooth Controlled LED

Rated 5.00 out of 5

2 LEDs

Add to cart

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

canbus-error-free-3030-chip-cross-pin-bau15s-py21w-orange-led.webp

-30%

Amber BA15S P21W Canbus LED

Rated 4.93 out of 5

Set of 2

Add to cart

Upgrade your vehicle’s lighting with the Canbus Error Free BA15S LED P21W Bulbs. Available in Amber, Red, and White, these Canbus error-free bulbs are perfect for indicators, brake lights, and rear fog lamps.

Important Fitment & Return Notice

This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.

If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED

Please check your existing bulb type and socket before ordering.

This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.

Color Options: Amber, Red, and White for versatile applications.
Error-Free Operation: Compatible with Canbus systems.
360° Illumination: 44 curved LED chips for maximum brightness.
Energy Efficient: Consumes only 25W, outperforming halogen bulbs.
Easy Installation: Plug-and-play design for hassle-free replacement.

R2 D-Series D1S D1R D1H headlight foglight led

-21% Sold out

150W D1S D Series HID to LED Kit 4300K Warm White

Rated 5.00 out of 5

⚠️ D1S HID to LED Conversion Notice

This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

-30%

2 x 36mm Festoon LED

Rated 4.80 out of 5

Set of 2

Add to cart

Upgrade your vehicle’s lighting with the Canbus Error Free Festoon LED Light, also known as C5W, C10W bulbs. Featuring Canbus error-free technology and SMD LED chips, it delivers bright, energy-efficient illumination for cabin, license plate, and parking lights.

Error-Free Design: Built-in Canbus resistors prevent dashboard errors.
Energy Efficient: Consumes less than 3W per bulb.
Multiple Sizes: Available in 31mm, 31-36mm combo, 36mm, 38mm, and 41mm.
Plug-and-Play: Direct halogen replacement.
Durable Build: High-quality SMD LED chips for longevity.

-34%

Warm White T10 W5W LED

Rated 4.87 out of 5

Set of 2

Add to cart

Upgrade your vehicle’s lighting with the Ultra-Compact T10 Canbus LED Bulbs. These error-free, energy-efficient bulbs are perfect for replacing halogens in cabin lighting, license plates, and parking lights.

Canbus Error-Free: No flickering or dashboard warnings.
Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
Plug-and-Play: Matches halogen size (9x23mm).
Multi-Use: Ideal for interiors, license plates, and more.
Energy Saver: Uses 80% less power than halogens.

-23% Sold out

2.5 Inch Round DRL Projector Shroud

Upgrade your headlights with the Premium 2.5 Inch Projector Shroud. Featuring integrated Angel Eye DRL, this shroud enhances both style and visibility for Bi-LED and Bi-HID systems.

Integrated DRL: Bright and efficient Angel Eye design.
Multiple Styles: Choose from Rectangle, Boxy, or Round.
Durable Build: Resistant to high temperatures and wear.
Easy Installation: Fits most 2.5-inch projectors seamlessly.
Stylish Upgrade: Adds a modern look to your vehicle.

-11% Sold out

Set of 2 PY21W BAU15S LED

Rated 4.69 out of 5

Upgrade your vehicle’s turn signals with the Bright BAU15S 1156 PY21W LED Turn Signal Lamp. Featuring Canbus error-free technology and 35 SMD LEDs, it delivers bright, reliable illumination for safer signaling.

Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.

No Hyperflash: Built-in resistors prevent rapid blinking.
No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
Plug-and-Play: Direct halogen replacement.
Durable Build: High-quality aviation grade aluminum for longevity.
Wide Compatibility: Fits BAU15S and PY21W sockets.

Male Connector Part no. 3B0 972 712

Rated 5.00 out of 5

₹299.00 Pc

Add to cart

Part no. 3B0-972-712 or 3B0972712 or 3B0 972 712 Male Connector

-14%

OEM 2-Pin Connector Part No. 191 972 712 and 191 972 702 For Audi, VW, Skoda

Rated 5.00 out of 5

Pc

Select options

VW 2 Pin connector part numbers 191 972 712 and 191 972 702. Restore your VAG vehicle’s electrical systems with the OEM 2-Pin 2.5mm Connector. Designed for Audi, VW, Skoda, and Seat, this durable plug ensures reliable connections for sensors, lights, and more.

OEM Fit: Replaces part numbers 191972712 and 191972702.
Tin-Plated Copper: Resists oxidation for stable conductivity.
Easy Installation: Crimp or solder-free setup.
Wide Application: Sensors, lights, speakers, injectors.
14V/10A Rating: Safe for critical electrical systems.

Sold out

30A Micro2 Fuse (Pack of 10)

Rated 5.00 out of 5

Replacement Micro2 Fuse Kit: Perfect for protecting your vehicle's electrical system, this kit includes fuses compatible with cars, trucks, motorcycles, and more. Easy to use and color-coded for quick recognition, it ensures safe operation in case of overloads or short circuits.

Multiple Amp Ratings: Available in 5A, 7.5A, 10A, 15A, 20A, 25A, and 30A
Wide Compatibility: Fits cars, vans, trucks, motorcycles, boats, and more
Durable Build: High-quality plastic cover for thermal and electrical protection
Simple Installation: Standard blade fuses for easy replacement and backup
Color-Coded: For quick identification of the correct fuse rating

-21% Sold out

PY21W BAU15S Cross Pin Indicator LED

Rated 5.00 out of 5

Enhance your vehicle’s turn signals with the PY21W BAU15S 1156 Cross Pin LED Bulb. Featuring 144 SMD LEDs and Canbus error-free technology, it delivers bright, reliable signaling while saving energy. Perfect for cars, bikes, and trucks.

Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.

Canbus Error-Free: No hyper-flashing or dashboard errors.
144 SMD LEDs: Superior brightness and longevity.
Energy Efficient: 21-25W power consumption.
Plug-and-Play: Direct halogen replacement.

-30%

Propeller Holder for DJI Mini 4 Pro – Sensor Protection, Adjustable Silicone Strap, and Quick-Release Design

Pc

Select options

Protect your drone's propellers and sensors with this specialized Propeller Holder for DJI Mini 4 Pro. Featuring an adjustable silicone strap and quick-release design, it ensures secure storage and transport.

Adjustable Fit: Silicone strap accommodates propeller variations.
Sensor Protection: Shields obstacle avoidance and filler lights.
Quick-Release: Effortless installation and removal.
Compact Design: Easy to carry without added bulk.
Compatibility: Designed exclusively for DJI Mini 4 Pro.

-17%