Shop - Durvient®

150° H21W H6W BAY9S White

Rated 4.50 out of 5

Upgrade your rear fog lights with the H21W H6W BAY9S/BAX9S LED Bulb. Featuring eight 3030 LEDs and a 360° beam, it ensures bright, error-free illumination for foggy conditions.

360° Illumination: 10 LEDs for uniform brightness.
Canbus-Compatible: No error codes in most vehicles.
Durable Build: Shockproof and vibration-resistant.
Easy Install: Direct replacement for halogen bulbs.
Wide Fitment: Compatible with BAX9S and BAY9S sockets.

-30% Sold out

Skoda Octavia II (2009-2014) Stereo Frame Fascia

Upgrade your Skoda’s stereo system with the Double Din Facia RCD Stereo Frame. Designed for Skoda Yeti, Laura, and Octavia models, this facia ensures a seamless fit for RCD330, RCD340, RCD360, and RCD880 head units.

Compatibility: Upgrades RCD510/Swing/Bolero to modern multimedia systems.
Perfect Fit: Seamlessly integrates with your dashboard.
Durable ABS Plastic: Resists wear and maintains a sleek look.
Tool-Free Installation: No modifications required.
Sleek Design: Black/silver finish enhances your car’s interior.

-20% Sold out

Foldable Spider Landing Gear for DJI Mini 4 Pro: Take Off & Land Anywhere with Confidence

Rated 4.33 out of 5

Select options

Enhance your drone’s stability and protection with the Foldable Spider Landing Gear For DJI Mini 4 Pro. Lightweight, portable, and easy to install, it raises your drone by 30mm for safe take-offs and landings on uneven surfaces.

Spider-leg design for enhanced stability on rough terrains.
Ultra-lightweight 21g ABS construction.
30mm height increase to protect vital drone components.
One-step installation with anti-slip silicone pads.
Foldable design for portability and easy storage.

Sold out

Pack of 2 Posi-Taps

Rated 4.00 out of 5

Simplify your electrical connections with the Non-Splice Posi-Tap Connector EX-130R-604. Designed for 16-18 AWG (0.75 ~ 1.5 sq mm) wires, this tool-free, hot-swappable connector ensures secure, non-destructive wiring for automotive and electrical projects.

Non-Splice Design: Tap into wires without cutting or crimping.
Tool-Free Installation: No crimping, soldering, or tape required.
Hot Swappable: Easily connect or disconnect wires as needed.
Wide Compatibility: Works with 16-18 AWG wires.
Durable Build: Made from high-quality ABS material.

-29%

White T15 W16W for Reverse

Rated 4.73 out of 5

Set of 2

Add to cart

Upgrade your vehicle’s lighting with the Canbus Error Free T15 W16W/WY16W LED Bulb. Featuring 360° illumination and no hyperflash, this bulb is perfect for turn signals, reverse lights, and parking lights.

Canbus Error-Free: Prevents dashboard warnings and hyperflashing.
360° Illumination: Ensures visibility from all angles.
Energy Efficient: 9W power consumption for reduced energy use.
Plug-and-Play: Matches halogen bulb size for easy installation.
Durable Cooling: Aluminum heat sink for extended lifespan.
Wide Compatibility: Compatible with 90% of the vehicles without Error and hyper flashes.
Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).

-23%

Fog Spotlight Fork Mount for Motorcycles 20-38mm (Pack of 2)

Rated 5.00 out of 5

Pack of 2

Add to cart

Universal Motorcycle Fog Lamp Mount, Heavy-duty aluminum clamps for fog lights, spotlights, or LED bars.

Size Options: Choose 20-38mm or 38-60mm clamps for the perfect round bar fit
360° Adjustable: 360° rotatable and adjustable for precise lighting angles,
Anodized Aluminum: Hard-anodized aluminum alloy resists rust and wear.
Easy to Install:Easy clamp-on installation with basic tools, no drilling or modification.
Includes: 2 x brackets, 4 x long screws, 2 x M10 screws, 2 x Spring Washer.

-53% Sold out

3 x Standard Fuse Tap

Rated 5.00 out of 5

Power your car accessories safely with the Standard Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.

Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
High Capacity: Handles up to 32V and 30A for robust performance.
Plug-and-Play: Includes a complimentary fuse for quick installation.
Non-Invasive Design: No cutting or splicing required.
Wide Compatibility: Works with Volkswagen, Skoda, Audi, BMW, Mercedes, and more.

-20% Sold out

2 Pin Pigtail Connector for Volkswagen Skoda Audi Part no. 1J0 973 802

The VAG Pigtail Connector 1J0973802 provides secure and reliable electrical connections for Audi, VW, Skoda, and Seat vehicles. This OEM-style connector is perfect for accessories like fuel injectors, horns, and washers.

OEM part number 1J0 973 802 for perfect compatibility.
Secure 2-pin female connector for VAG cars.
Includes 5-inch pre-configured wire harness for easy installation.
Eliminates loose connections and fire hazards.
Supports up to 100W, 12V for optimal performance.

OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.

R2 D-Series D1S D1R D1H headlight foglight led

-21% Sold out

150W D1S D Series HID to LED Kit 4300K Warm White

Rated 5.00 out of 5

⚠️ D1S HID to LED Conversion Notice

This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

-25% Sold out

ISO to MQB Quadlock Cable (With Tech Support)

Rated 5.00 out of 5

Tech support and cable/connector included. Tech support Fee is non-refundable, and is limited to a maximum of 15 minutes of support, available for one-time use only. Support is provided via Call or Chat.

-42%

Soft Silicone Protective Cover DJI RC-N1, N2, N3 – Enhanced Grip and Drop Protection

Cover

Select options

Grab Soft Silicone Cover DJI RC-N1, N2, or N3 remote controller with this soft silicone cover. Designed for non-display controllers, it offers enhanced grip, drop protection, and easy cleaning.

Enhanced Grip: Non-slip silicone texture for secure handling.
Drop Protection: Absorbs shocks to prevent damage.
Precision Fit: Full access to buttons, ports, and switches.
Easy to Clean: Resists dirt, dust, and oil.
Compatibility: DJI RC-N1, N2, N3 (Non-Display Controllers).

-44%

D4S D4R HID to LED Conversion Kit (Plug and Play)

Rated 4.50 out of 5

Set of 2

Add to cart

The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.

High Brightness: 15000LM/Pair for superior illumination
Easy Installation: Plug & Play, no modifications needed
Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
Durable: Lifespan over 50,000 hours, IP68 waterproof
Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets

Important: Works with stock HID Ballast only. Ensure ballast is in working condition.

-40%

150W LED Headlight Foglamp Kit with CSP 4070 LED Chip – Warm White 4300K / Cool Daylight 6000K

Rated 4.89 out of 5

Pair

Select options

150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.

High power: 150W per pair (75W each) for strong, even light.
Color choice: 4300K for poor weather or 6000K for a crisp white look.
Cooling system: Dual copper tubes with turbo fan cooling.
Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
Note: Not a dual color LED – pick your preferred color at checkout.

-20%

Propeller Blades for DJI Mini 3, Lito 1, Lito X1 (not Mini 3 Pro)

8 Blades

Add to cart

Upgrade your drone with high-performance polycarbonate Blades for DJI Mini 3, Lito 1, Lito X1. Made from lightweight polycarbonate, they offer quieter flights, improved efficiency, and exclusive compatibility.

Aerodynamic Design: 6030F specification for smoother, quieter flights.
Lightweight: Each blade weighs only 0.9g for minimal drone load.
Durable Material: Made of premium polycarbonate (PC) for longevity.
Complete Set: Includes 8 blades, screws, and a screwdriver.
Exclusive Compatibility: Designed for DJI Lito 1, Lito X1, Mini 3 (not for Mini 3 Pro).

-13% Sold out

2.5 Inch Rectangle DRL + Indicator Projector Shroud

Upgrade your headlights with the Premium 2.5 Inch Projector Shroud. Featuring integrated Angel Eye DRL, this shroud enhances both style and visibility for Bi-LED and Bi-HID systems.

Integrated DRL: Bright and efficient Angel Eye design.
Multiple Styles: Choose from Rectangle, Boxy, or Round.
Durable Build: Resistant to high temperatures and wear.
Easy Installation: Fits most 2.5-inch projectors seamlessly.
Stylish Upgrade: Adds a modern look to your vehicle.

-18% Hot