Sort by
Price filter
FILTER BY COLOR
Filter by brand
W21W T20 DRL White
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
BAU15S 150° Switchback LED Indicator + DRL
160W H4 Tri Color Smart Bluetooth Controlled LED
- High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
- Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
- Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
- Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
- Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.
P21W BA15S DRL White
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
150° H21W H6W BAY9S White
- 360° Illumination: 10 LEDs for uniform brightness.
- Canbus-Compatible: No error codes in most vehicles.
- Durable Build: Shockproof and vibration-resistant.
- Easy Install: Direct replacement for halogen bulbs.
- Wide Fitment: Compatible with BAX9S and BAY9S sockets.
Bright P21W BA15S 1156 LED Bulb – Flat Pin 180° for Brakes, Reverse, Indicators
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- 21-25W Efficiency: Brighter than halogen, prevents dashboard errors.
- Error-Free Design: Built-in resistor prevents hyper-flashing.
- Dual Colors: White for reverse lights, Amber for brakes/indicators.
- Plug-and-Play: Direct replacement for halogen bulbs.
Super Bright 10 LED T10 White
- 360° Illumination: 10 LEDs for uniform brightness.
- Canbus-Compatible: No error codes in most vehicles.
- Durable Build: Shockproof and vibration-resistant.
- Easy Install: Direct replacement for halogen bulbs.
- Wide Fitment: Compatible with T10, W5W, W10W Sockets.
Set of 4 PY21W BAU15S LED
Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.
- No Hyperflash: Built-in resistors prevent rapid blinking.
- No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality aviation grade aluminum for longevity.
- Wide Compatibility: Fits BAU15S and PY21W sockets.
9W Red T15 W16W for Tail/Parking Light
- 48x 2016 SMD LEDs: Brighter and more efficient than traditional LEDs.
- Canbus Error-Free: No hyperflashing or dashboard warnings.
- 360° Illumination: Ensures visibility from all angles.
- Plug-and-Play: Direct replacement for T15 W16W/WY16W halogen bulbs.
- Durable Cooling: Thick aluminum heat sink for extended lifespan.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
1 Pc x BA15S White LED for Car Backup Lamp
- Single LED: Ideal for cars with one reverse light.
- Canbus Error-Free: No error codes or hyper-flashing.
- Bright White Light: 144 SMD LEDs for superior brightness.
- Plug-and-Play: Direct replacement for P21W BA15S 1156 bulbs.
- Wide Compatibility: Works with Volkswagen, Skoda, Hyundai, and more.
144 LED White BA15S
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- 21-25W Efficiency: Brighter than halogen, prevents dashboard errors.
- Error-Free Design: Built-in resistor prevents hyper-flashing.
- Dual Colors: White for reverse lights, Amber for brakes/indicators.
- Plug-and-Play: Direct replacement for halogen bulbs.
Intelligent LED Headlight Canbus Decoder Error-Free, Anti-Flicker for H7/H8/H11/HB3/H4 Headlights
- Error-Free Operation: Eliminates dashboard warnings and flickering.
- Wide Compatibility: Supports H7, H8, H11, HB3, H4, and cross-compatible bulb types.
- High Power Handling: Up to 60W and 5A current.
- Plug-and-Play: No tools or modifications needed.
- Durable Build: High-quality plastic and copper components.
Dual Color T10/T15 Indicator + DRL LED
- 2-in-1 Function: Amber turn + white DRL for motorcycles and scooters.
- Better Safety: Presence of DRL increases vehicle visiblity. Best suited for the vehicles without DRLs from factory.
- Plug & Play: Stock T10/T15 Socket allows plug and play installation without any modifications.
- 3014 SMD Chips: Bright 27 white + 27 amber per LED for better visual and visiblity.
- Aluminum Body: Durable and Effective Heat Dissipation.
- Wide Fit: T10, W5W, W10W sockets.
- Includes: 2 LEDs + 2 Tap connectors for DRL connections.











