Connectors & Tools - Durvient®

Cruise Control Wiring Harness for Volkswagen Skoda Cars (PQ25)

Pc

Add to cart

PQ25 Cruise Control Harness – Complete wiring solution for retrofitting cruise control to VW Polo, Vento, Ameo, Jetta, and Skoda Fabia, Rapid. Requires compatible combination switch (6RA 953 513G) and BCM 6R0 937 087 or higher.

Vehicle Platform: PQ25 (VW, Skoda)
Required BCM: 6R0 937 087 or higher
Compatible Switch: 6R0 953 521C/6RA 953 513G/6RA 953 513G
Functions: SET, ACCELERATE, DECELERATE, RESUME
Coding Required: VCDS / Diagnostic interface 38772

WARNING: We are supplying only the required part. Installation support or technical guidance is not included. Any information provided in this post is intended solely for reference purposes. It is the customer’s responsibility to verify compatibility, required tools, installation procedure, and correct fitment before proceeding.

-29%

100 x Red Heat Shrinking Sleeves

Packs

Add to cart

The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.

All-in-One Solution: Combines soldering, sealing, and insulation.
IP67 Waterproof: Ensures maximum water and corrosion resistance.
High-Quality Materials: Polyolefin tubing and hot melt adhesive.
Easy to Use: No additional tools required; heat shrink technology.
Wide Compatibility: Available in multiple sizes for various wire gauges (click here).

-46%

Professional Automotive Wiring Harness Tape – Flame-Retardant Felt Cloth Tape (19mm x 15M)

Rated 5.00 out of 5

Roll

Select options

Upgrade your automotive wiring protection with Automotive Wiring Harness Tape flame-retardant felt cloth tape. Designed for high temps and easy installation, it reduces noise and ensures professional-grade durability.

Heat-Resistant: Withstands up to 105°C for engine bay use.
Strong Adhesive: No residue, secure bonding.
Easy to Tear: No tools needed – tear by hand.
Durable: Resists oil, abrasion, and moisture.
Vibration Control: Minimizes coil whine and rattling.

TE-1534334-1 BCM J519 T73a T73c pin terminal pack of 8

-38%

TE 1534334-1 Pin for BCM J519 MQB Platform T73 Terminal (Pack of 8)

Pack

Add to cart

TE Connectivity 1534334-1 – Genuine AMP MCP 1.5K female receptacle terminal. Designed for 1.5 mm² wire. Used in VAG BCM J519 73-pin connectors (pins 64, 65, 67–72) for lighting circuits.

Part Number: 1534334-1
Type: Receptacle (Female)
Wire Size: 1.5 mm² (15-17 AWG)
Current Rating: 12–13A
Application: BCM J519 T73a and T73c connectors

-38%

18 Pcs Terminal Removal Tool Kit

Set

Add to cart

Repair wiring harnesses effortlessly with this 18-piece terminal removal tool kit. Stainless steel extractors safely remove pins from connectors for cars, bikes, and appliances.

18 Precision Tools: Single/double-pin and casing extractors.
Universal Fit: 0.8mm–6.2mm size range.
No Damage: Push-pull design preserves terminals.
Durable: Stainless steel + plastic construction.

-34%

10 x Red T-Tap Connectors

Rated 5.00 out of 5

Add to cart

Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.

Self-Stripping: No cutting, soldering, or stripping needed.
Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
Durable: Tinned copper and flame-retardant PVC housing.
Secure Fit: Stainless-steel spring buckle prevents loosening.
Multiple Use Case: Ideal for cars, boats, and home wiring.

-20%

Fog Spotlight Fork Mount for Motorcycles 20-38mm (Pack of 2)

Rated 5.00 out of 5

Pack of 2

Add to cart

Universal Motorcycle Fog Lamp Mount, Heavy-duty aluminum clamps for fog lights, spotlights, or LED bars.

Size Options: Choose 20-38mm or 38-60mm clamps for the perfect round bar fit
360° Adjustable: 360° rotatable and adjustable for precise lighting angles,
Anodized Aluminum: Hard-anodized aluminum alloy resists rust and wear.
Easy to Install:Easy clamp-on installation with basic tools, no drilling or modification.
Includes: 2 x brackets, 4 x long screws, 2 x M10 screws, 2 x Spring Washer.

-22%

50 x Red Heat Shrinking Sleeves

Packs

Add to cart

The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.

All-in-One Solution: Combines soldering, sealing, and insulation.
IP67 Waterproof: Ensures maximum water and corrosion resistance.
High-Quality Materials: Polyolefin tubing and hot melt adhesive.
Easy to Use: No additional tools required; heat shrink technology.
Wide Compatibility: Available in multiple sizes for various wire gauges (click here).

dual horn harness single horn to dual horn splitter for skoda volkswagen

-53%

SIngle to Dual Horn Splitter Harness for Skoda Volkswagen

Rated 4.83 out of 5

Harness

Add to cart

Single to Dual Horn Harness - Complete plug-and-play kit to convert your single horn setup to dual horns without cutting factory wires.

Complete Kit: 1 male + 2 female connectors pre-assembled with 1.2 meter long wiring harness.
No Modification: Plug-and-play installation.
Dual Conversion: Converts single connection to dual outputs.
Compatible with: Skoda Kylaq, Kushaq, Slavia, Rapid. Volkswagen Polo, Taigun, Virtus, Vento etc.
Connector Type: 4D0 971 992 male and female connectors.

Important Purchase Notice

This is a non-returnable product. Please verify compatibility with your installer, dealer, or electrician before placing the order.

Order only after confirming the correct connector and use case for your vehicle.

-47%

3 x Mini Fuse Tap

Rated 4.73 out of 5

Pack

Add to cart

Power your car accessories safely with the Mini ATM/APM Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.

Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
High Capacity: Handles up to 32V and 30A for robust performance.
Plug-and-Play: Includes a complimentary fuse for quick installation.
Non-Invasive Design: No cutting or splicing required.
Compatibility: Works with Mini (ATM/APM) blade fuses.

-34%

10 x Yellow T-Tap Connector

Rated 5.00 out of 5

Add to cart

Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.

Self-Stripping: No cutting, soldering, or stripping needed.
Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
Durable: Tinned copper and flame-retardant PVC housing.
Secure Fit: Stainless-steel spring buckle prevents loosening.
Multiple Use Case: Ideal for cars, boats, and home wiring.

10 x 2.8mm Male Pin

Rated 5.00 out of 5

₹259.00 Pack of 10

Add to cart

Upgrade your automotive wiring with the TE 962883-1 & TE 964274-2 Crimp Terminal Pair. This male and female set ensures secure, OE-standard connections for VW, Audi, BMW, and Honda vehicles.

Dual Variations: Male and female terminals sold separately (10 pieces per pack).
OE Quality: Precision fit for reliable electrical connections.
24A Rating: Handles low-power systems like audio and lighting.
Wide Compatibility: Fits Volkswagen, Audi, BMW, Honda models.
Compact Design: 2.8x0.8mm tab for exact fitment.

-47%

Micro 2 Fuse Tap ATC APT ATR Low Profile Fuse Tap – Adapter for Kia, Hyundai, Mahindra, Ford

Rated 4.85 out of 5

Pack

Select options

Power your car accessories safely with the Micro 2 Fuse Tap. This add-a-circuit adapter supports up to 32V and 20A, ensuring dual fuse protection for your vehicle and devices.

Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
High Capacity: Handles up to 32V and 30A for robust performance.
Plug-and-Play: Includes a complimentary fuse for quick installation.
Non-Invasive Design: No cutting or splicing required.
Compatibility: Works with Micro 2 (ATC/ATO) blade fuses.