Automotive - Durvient®

160W H4 Tri Color Smart Bluetooth Controlled LED

Rated 5.00 out of 5

2 LEDs

Add to cart

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

150W D5S D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D5S HID to LED Conversion Notice

This product is a D-Series LED replacement for D5S HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W D4S/D4R D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D4S/D4R HID to LED Conversion Notice

This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W D3S/D3R D8S D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D3S/D3R, D8S HID to LED Conversion Notice

This product is a D-Series LED replacement for D3S/R, D8S HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W D2S/D2R D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D2S/D2R HID to LED Conversion Notice

This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W D1S D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D1S HID to LED Conversion Notice

This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W H27, 880, 881 4300K Warm White

Rated 4.89 out of 5

Pair

Add to cart

150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.

High power: 150W per pair (75W each) for strong, even light.
Color choice: 4300K for poor weather or 6000K for a crisp white look.
Cooling system: Dual copper tubes with turbo fan cooling.
Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
Note: Not a dual color LED – pick your preferred color at checkout.

Front & Rear Footwell Kit for VW Skoda

Rated 4.50 out of 5

Set

Add to cart

Upgrade your Volkswagen or Skoda’s interior with the OEM Front and Rear Footwell Kits. These kits add ambient lighting to your car’s footwells, enhancing visibility and style. Designed for easy DIY installation, they include halogen bulbs (upgradable to T10 LEDs) and pre-wired harnesses for a seamless setup.

OEM Quality: Genuine part No. 5GG 947 409 ensures reliability.
Front & Rear Options: Choose between front-only or front+rear lighting.
Wide Compatibility: Fits Volkswagen Polo, Vento, Ameo, Skoda Rapid, Slavia, Kushaq, and more.
DIY-Friendly: Includes pre-wired harnesses and OE connectors.
LED-Upgradable: Swap halogen bulbs for T10 LEDs for brighter lighting. Grab LED from here
Complete Kits: Comes with lights, harnesses, and fuse taps (only with front footwell).

Anti Glare IRVM (Mount no. 145) with Reverse Camera & DIsplay for Jeep Compass

RS3 Fog Projector (Only White)

Rated 5.00 out of 5

RS3 Fog Projector (Only Tri Color with White Laser)

Rated 5.00 out of 5

Pairs

Add to cart

Enhance nighttime driving safety with the RS3 3-Inch Bi-LED Dual Laser Fog Projector. Featuring dual lasers, a 6000K Daylight White beam, and IP65 waterproofing, it’s built for unmatched visibility and durability.

Multi-Color Options: Chose from ONLY white or Tri-Color options to fit your requirement.
Dual Laser Spotlights: Precision beams for long-range visibility.
Indian Road Legal: Right-hand or Flat Cut-out drive beam pattern compliant with regulations.
Universal Fit: Fits cars and bikes with 3-inch fog lamp assemblies.
IP65 Rated: Waterproof and dustproof for all weather.

License Plate Mounted Camera for Vento, Rapid, Jetta, Ameo, Kushaq, Slavia, Virtus, Taigun, Tera, Kylaq

Rated 4.83 out of 5

Set

Add to cart

Specifically designed for Sedans such as Vento, Ameo, Rapid, Jetta, Slavia, Virtus and MQB hatchback Kylaq, Kushaq, Taigun. Note: If your car comes with factory-fitted LED license plate lights, you’ll either need to disable one side or retrofit a halogen version yourself using part numbers 5N0 943 021 B or 1K9 943 021 D.

-30% Sold out