Filter by brand
Auto Dimming IRVM for Tata Harrier, Safar (Pre 2023 Facelift)
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
VWAG 1.8mm Crimp Terminal PIn Part no. 000979009E
TE Connectivity 965906-1 – Genuine MQS female receptacle terminal. Designed for 18-20 AWG (0.5-0.75 mm²) wire. Used in VAG BCM J519 73-pin and 46-pin connectors. Pack of 10.
- Part Number: 965906-1 / 000979009E
- Type: Receptacle (Female)
- Wire Size: 18-20 AWG (0.5-0.75 mm²)
- Current Rating: 7.5A
- Application: BCM J519 T73a, T73b, T73c, T46b connectors
T20 WY21W Switchback LED Indicator + DRL
Anti-Glare Rear View Mirror ORVM Wide-Angle Heated Mirror Lens – For Volkswagen, Skoda, Honda, Toyota and More
Upgrade your car’s mirrors with Anti-Glare Rear View Mirror ORVM Lenses for wider views, reduced glare, and optional heating. Fits 20+ models, check size guide before purchase.
- Wide-Angle: 30% broader view vs. stock mirrors.
- Anti-Glare Blue Tint: Safer night driving, equally pleasing to see through in day time.
- Universal Fit: Volkswagen, Skoda, Honda, Toyota, Ford etc (if your car isn't here, feel free to reach out to us)
- Heated (DIY): Most mirrors have heating element, some does not.
- Note: If the product includes a heating element, please note that support for its activation, setup, or functionality is not provided. We recommend self-exploration for enabling this feature, if available.
ISO to MQB Quadlock Cable (With Tech Support)
3" Tri Color Fog Projector
Upgrade your car or bike's fog lights with the M617 3-Inch Bi-LED Tri-Color Fog Projector Kit. Delivering high brightness, a perfect beam pattern, and universal fitment, this projector is designed for fog lights, auxiliary lights, or bike headlights.
- Tri-Color Lighting: Easily switch between 3000K, 4300K, and 5500K for optimal visibility.
- Universal Fit: Compatible with car fog lights, high beams, and bike headlights.
- High Brightness: Up to 20,000 lumens for maximum visibility and safety on the road.
- Durable and Reliable: Waterproof with IP65 rating and advanced heat dissipation system.
- Easy Installation: Includes universal mounting brackets for hassle-free installation.
Auto Dimming IRVM Mirror Electronic Rear View Mirror, Electrochromatic for All Cars
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Orange/Amber Double Sided Flat T10 W5W W10W LED
160W D2S/D2R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
VAG Horn Male Connector
OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
- OEM Fit: Direct replacement 4D0 971 992 connectors
- Dual Options: Available as male or female connectors
- Pre-Wired: 6-inch harness for easy installation
- High Power: 100W capacity for all horn types
OEM VAG Horn Connectors – Male/Female 4D0 971 992 with 6-inch Wires for Volkswagen, Skoda, Audi
OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
- OEM Fit: Direct replacement 4D0 971 992 connectors
- Dual Options: Available as male or female connectors
- Pre-Wired: 6-inch harness for easy installation
- High Power: 100W capacity for all horn types
150W H8, H9, H11, H16 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
2 x 10 Watt 10 Ohms Resistor
10 Watt Resistor solve canbus errors and stabilize electrical loads. Rated for 10W 10 Ohm wirewound aluminum case resistor. Prevent fast blinking in indicator/turn signals for motorcycles and cars with ease. Designed for industrial and automotive-grade performance, it’s durable, efficient, and highly versatile.
- Canbus Error Decoding/Fast Blink Fix: Solves canbus errors and stabilizes electrical loads. Prevents fast blinking in motorcycle and car indicators/turn signals.
- High Performance: 10W power rating, 10 Ohm resistance, and 5% tolerance ensure precision and stability.
- Superior Durability: Sturdy aluminum casing resists high temperatures, moisture, and vibrations.
- Efficient Heat Dissipation: Prevents overheating with its advanced aluminum shell design.
- Wide Applications: Compatible with cars, motorcycles, inverters, LED lights, speakers, power supplies, and more.
- Easy Installation: Screw-mounted design with compact dimensions for seamless integration.
160W D3S/D3R D8S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D3S/R, D8S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Reverse Camera with Boot Latch Button for Skoda Laura (Octavia MK2), Fabia, Yeti
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
1 x Micro Fuse Tap
Power your car accessories safely with the Micro Fuse Tap. This add-a-circuit adapter supports up to 32V and 30A, ensuring dual fuse protection for your vehicle and devices.
- Dual Fuse Protection: Safeguards both vehicle and accessory circuits.
- High Capacity: Handles up to 32V and 30A for robust performance.
- Plug-and-Play: Includes a complimentary fuse for quick installation.
- Non-Invasive Design: No cutting or splicing required.
- Compatibility: Works with Mini (ATM/APM) blade fuses.
