Automotive - Durvient®

Super Bright H21W H6W BAY9S BAX9S LED Auto Light Rear Fog Lamp Bulb

Rated 4.50 out of 5

Upgrade your rear fog lights with the H21W H6W BAY9S/BAX9S LED Bulb. Featuring eight 3030 LEDs and a 360° beam, it ensures bright, error-free illumination for foggy conditions.

360° Illumination: 10 LEDs for uniform brightness.
Canbus-Compatible: No error codes in most vehicles.
Durable Build: Shockproof and vibration-resistant.
Easy Install: Direct replacement for halogen bulbs.
Wide Fitment: Compatible with BAX9S and BAY9S sockets.

OEM Front & Rear Footwell Kits for Volkswagen and Skoda – 5GG 947 409

Rated 4.50 out of 5

Set

Select options

Upgrade your Volkswagen or Skoda’s interior with the OEM Front and Rear Footwell Kits. These kits add ambient lighting to your car’s footwells, enhancing visibility and style. Designed for easy DIY installation, they include halogen bulbs (upgradable to T10 LEDs) and pre-wired harnesses for a seamless setup.

OEM Quality: Genuine part No. 5GG 947 409 ensures reliability.
Front & Rear Options: Choose between front-only or front+rear lighting.
Wide Compatibility: Fits Volkswagen Polo, Vento, Ameo, Skoda Rapid, Slavia, Kushaq, and more.
DIY-Friendly: Includes pre-wired harnesses and OE connectors.
LED-Upgradable: Swap halogen bulbs for T10 LEDs for brighter lighting. Grab LED from here
Complete Kits: Comes with lights, harnesses, and fuse taps (only with front footwell).

D Series LED Plug & Play HID to LED Conversion Kit – D1S D2S D3S D4S D5S D8S – 15000LM 6000K

Rated 4.50 out of 5

Set of 2

Select options

The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.

High Brightness: 15000LM/Pair for superior illumination
Easy Installation: Plug & Play, no modifications needed
Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
Durable: Lifespan over 50,000 hours, IP68 waterproof
Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets

Important: Works with stock HID Ballast only. Ensure ballast is in working condition.

Konnwei BK100 Bluetooth Battery Tester

Rated 4.00 out of 5

Non-Splice Posi-Tap Connector Blue | 16-18 AWG Wire Gauge | EX-130R-604

Rated 4.00 out of 5

Select options

Simplify your electrical connections with the Non-Splice Posi-Tap Connector EX-130R-604. Designed for 16-18 AWG (0.75 ~ 1.5 sq mm) wires, this tool-free, hot-swappable connector ensures secure, non-destructive wiring for automotive and electrical projects.

Non-Splice Design: Tap into wires without cutting or crimping.
Tool-Free Installation: No crimping, soldering, or tape required.
Hot Swappable: Easily connect or disconnect wires as needed.
Wide Compatibility: Works with 16-18 AWG wires.
Durable Build: Made from high-quality ABS material.

Konnwei KW210 12V Battery Tester

Rated 4.00 out of 5

160W H8/H9/H11/H16 Tri Color Smart Bluetooth Controlled LED

Rated 5.00 out of 5

2 LEDs

Add to cart

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

160W H7 Tri Color Smart Bluetooth Controlled LED

Rated 5.00 out of 5

2 LEDs

Add to cart

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

160W H4 Tri Color Smart Bluetooth Controlled LED

Rated 5.00 out of 5

2 LEDs

Add to cart

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

160W H4 Tri Color Smart Bluetooth Controlled LED

Rated 5.00 out of 5

2 LEDs

Add to cart

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

150W D5S D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D5S HID to LED Conversion Notice

This product is a D-Series LED replacement for D5S HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W D4S/D4R D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D4S/D4R HID to LED Conversion Notice

This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W D3S/D3R D8S D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D3S/D3R, D8S HID to LED Conversion Notice

This product is a D-Series LED replacement for D3S/R, D8S HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W D2S/D2R D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D2S/D2R HID to LED Conversion Notice

This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W D1S D Series HID to LED Kit 4300K Warm White

Pair

Add to cart

⚠️ D1S HID to LED Conversion Notice

This product is a D-Series LED replacement for D1S HID bulbs and is not plug-and-play with the factory HID ballast.

It does NOT include the standard D-Series block connector that plugs into the ballast.
The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
These wires must be connected to the vehicle’s headlight power supply before the ballast.
The factory HID ballast must be bypassed or disconnected for proper operation.

150W HID to LED D-Series Headlight Kit – Warm White 4300K

Pair

Select options

150W D-Series HID to LED conversion – CSP 4070 LEDs in 4300K Warm White or 6000K Pure White for OEM HID projector housings.

- D-Series fit: Suits D1S/D1H, D2S/D2H, D3S/D3R, D4S/D4R, D5S, D8S housings.
- Direct wire: Red (+) and black (-) wires connect to the headlight power feed; ballast must be bypassed.
- High output: 150W per pair (75W each) with focused beam pattern.
- Cooling: Dual copper tubes and turbo fan for thermal control.

Sort by

Price filter

Newsletter Subscribe

Follow Us

All About Us

Our Policies

Useful Links

Subscribe Newsletter

Secure Payment Options

Sort by

Price filter

FILTER BY COLOR

Filter by brand

Newsletter Subscribe

Follow Us

All About Us

Our Policies

Useful Links

Subscribe Newsletter

Secure Payment Options