Filter by brand
Door Trim Ciip for VW Skoda Part no. 3CN868243
Door Trim Clip Panel Retainer (Part no. 3CN868243) For VW, Audi, Skoda
- OEM Fit: Direct replacement for 3CN868243 on Volkswagen, Skoda, and Audi.
- Durable Nylon Construction: Flexible, wear-resistant for daily use.
- Integrated Sealer: Improves grip and reduces vibration or rattle.
- Easy Install: Push-fit design suitable for 8mm holes - no special tools needed.
- Pack Includes: 10 clips for front/rear door or quarter panel trim.
P21W BA15S DRL White
Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
OEM VAG Horn Connectors – Male/Female 4D0 971 992 with 6-inch Wires for Volkswagen, Skoda, Audi
OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
- OEM Fit: Direct replacement 4D0 971 992 connectors
- Dual Options: Available as male or female connectors
- Pre-Wired: 6-inch harness for easy installation
- High Power: 100W capacity for all horn types
Silver – Virtus, Slavia, Taigun, Kushaq, Golf, Octavia
100 x Red Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
160W D4S/D4R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Backup Revese Camera for Volkswagen Jetta (MK6, 6.5)
Enhance your vehicle’s safety with this Reverse Backup Camera, custom-designed for Volkswagen, Skoda, and Audi models. It offers a wide 170° viewing angle, weatherproof build, and hassle-free installation.
- Wide-Angle View: 170° lens for improved rear visibility and parking ease.
- Weatherproof Build: IP66–68 rated for protection against dust and water.
- Easy Fit: Designed to fit factory slots with no modifications needed.
- Vehicle-Specific Design: Compatible with select VW, Skoda, and Audi models.
- Recommended Add-ons: Use with Reverse Camera Adapter and/or Delay Timer Module for proper integration with RCD/MIB/Regio units.
- Important: For VAG cars with factory-fitted stereos, camera functionality must be activated through coding. Installation alone will not enable the rear-view display. Coding must be arranged by the user.
Front Footwell Kit for VW Skoda
Premium 2.5 Inch Projector Shroud with Angel Eye DRL – Stylish Upgrade for Bi-LED/Bi-HID Headlights
Upgrade your headlights with the Premium 2.5 Inch Projector Shroud. Featuring integrated Angel Eye DRL, this shroud enhances both style and visibility for Bi-LED and Bi-HID systems.
- Integrated DRL: Bright and efficient Angel Eye design.
- Multiple Styles: Choose from Rectangle, Boxy, or Round.
- Durable Build: Resistant to high temperatures and wear.
- Easy Installation: Fits most 2.5-inch projectors seamlessly.
- Stylish Upgrade: Adds a modern look to your vehicle.
1 x Magnetic Puddle Lamp
Magnetic Car Door Light – Add style with 7-color LED puddle lights. IR sensor turns on/off automatically. Rechargeable battery lasts up to 60 days. Easy magnetic or adhesive installation.
- 7 Colors: White, blue, ice blue, red, green, yellow, pink.
- IR Sensor: Auto on/off with door movement
- Light Sensor: Turns off in daylight to conserve battery
- Rechargeable: 400mAh battery, USB-C charging.
- 4 Modes: Constant, gradient, breathing, flashing.
- Easy Install: Magnetic or adhesive mount.
Auto Dimming IRVM for Datsun Go, Go+
Enhance night driving safety with the Auto Dimming IRVM Mirror. This electronic mirror automatically reduces glare, uses dual light sensors, and installs in minutes with the included DIY-friendly components.
- Auto-dimming: Adjusts to changing light conditions for a clearer, glare-free rear view at night.
- Dual sensors: Detect light from both oncoming traffic and vehicles behind you for smooth, automatic dimming.
- Easy installation: Supplied with mirror, wire harness, mounting bracket and clear fitting guidance.
- Mount specific fitment: Compatible with cars listed in the compatibility chart; always confirm your mount type and position before ordering.
- Safety focus: Helps reduce eye strain and maintain better focus on longer night drives.
Important Fitment & Return Information
Auto-dimming mirrors are vehicle-specific and include a fragile glass part. If the wrong mount type is ordered, the mirror can be damaged during return shipping and become unusable. For this reason, this product is listed as Non-Returnable for wrong purchase / wrong mount selection.
This Non-Returnable policy does not affect your warranty rights. If the mirror misbehaves, does not auto-dim as expected, or develops a fault during the warranty period, our team will help you troubleshoot and, where applicable, the standard Durvient warranty policy will apply.
Auto Dimming IRVM for Skoda Slavia, Kushaq, Kylaq with Rain/Light Sensor
Laura (Manual AC) Stereo Frame Fascia
Upgrade your Skoda’s stereo system with the Double Din Facia RCD Stereo Frame. Designed for Skoda Yeti, Laura, and Octavia models, this facia ensures a seamless fit for RCD330, RCD340, RCD360, and RCD880 head units.
- Compatibility: Upgrades RCD510/Swing/Bolero to modern multimedia systems.
- Perfect Fit: Seamlessly integrates with your dashboard.
- Durable ABS Plastic: Resists wear and maintains a sleek look.
- Tool-Free Installation: No modifications required.
- Sleek Design: Black/silver finish enhances your car’s interior.
50 x Green Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
Anti Glare ORVM for Ford Ecosports (2013-2022)
ISO to Quadlock Connector Conversion Cable Canbus Harness for Volkswagen & Skoda RCD 330/340/510
Important
This product is sold with two options: with support and without support. Your choice is final. Support cannot be purchased separately at a later date. Support amount paid is non-refundable.
If you are not fully confident about CANBUS wiring or BCM compatibility, please select the with support plan at the time of purchase.
Upgrade your VW or Skoda stereo with the ISO to Quadlock Connector Conversion Cable. This adapter supports RCD 330/340, RNS 510, and Android head units, offering plug-and-play installation with no wire cutting.
- Seamless Compatibility: Works with RCD 330, RCD 340, RNS 510, and Android units.
- Canbus Harness: Includes two extended cables for BCM connection.
- Wide Fitment: Compatible with VAG PQ platform cars Polo, Vento, Jetta, Ameo, Fabia and Rapid.
- Durable Build: Ensures reliable and secure connections.