Filter by brand
160W App Controlled Bluetooth Smart LED Headlight Bulb Kit for Cars (Tri Color 3000K/4300K/6000K)
Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.
- High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
- Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
- Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
- Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
- Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.
Set of 4 PY21W BAU15S LED
Upgrade your vehicle’s turn signals with the Bright BAU15S 1156 PY21W LED Turn Signal Lamp. Featuring Canbus error-free technology and 35 SMD LEDs, it delivers bright, reliable illumination for safer signaling.
Hyperflash Note: Fast blinking or bulb error with LED indicators is usually due to the BCM/ECU not accepting LED load, not a fault in the LED. Some cars trigger this instantly, others after the indicator has been ON for 1+ minutes as the LED warms up and current drops slightly. This can be resolved by using an LED flasher relay or load resistors. Such hyperflash or warning behaviour caused by vehicle compatibility or missing resistors/relay is not treated as a product defect and is not eligible for return or warranty claim as per our Return, Warranty and FAQ pages.
- No Hyperflash: Built-in resistors prevent rapid blinking.
- No Canbus Error: upto 25W power consumption, making it compatible with 95% of they vehicles
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality aviation grade aluminum for longevity.
- Wide Compatibility: Fits BAU15S and PY21W sockets.
Mount #170 Suzuki Jimny, Swift, Celario
25A Micro Fuse (Pack of 10)
Upgrade your vehicle’s electrical protection with the Micro Fuse APS LP Low Profile Fuse Kit. Compact, durable, and color-coded, these fuses are ideal for modern vehicles and marine systems.
- Low-Profile Design: Fits tight spaces in fuse panels.
- Wide Voltage Range: Compatible with 9V-32V systems.
- Durable Construction: Zinc terminals and heat-resistant housing.
- Color-Coded: Quick identification of amp ratings.
- Versatile Use: Cars, trucks, SUVs, and boats.
H7 LED Bracket Bulb Adapter for Volkswagen, Skoda, Mercedes, Audi, BMW
Upgrade your vehicle’s lighting with the H7 LED Bracket Bulb Adapter. Designed for H7 reflector-based headlights, this durable bracket ensures secure installation of LED/HID bulbs in Volkswagen, Skoda, Audi, and Mercedes models.
- High-Tension Steel: Heat and corrosion-resistant for longevity.
- Plug-and-Play: No modifications to stock headlights.
- Wide Compatibility: Fits VW, Skoda, Audi, BMW, Mercedes.
- Lightweight Design: 5g per bracket for easy handling.
- Secure Fit: Keeps bulbs firmly locked in place.
W5W W16W 26 SMD T10 T15 Canbus LED Bulbs – Heat Sink, Canbus Error Free, Intense Brightness
Upgrade your vehicle’s lighting with the W5W W16W Canbus T10 T15 Canbus LED Bulbs. Featuring 26 double-sided 4014 LED chips, these bulbs deliver intense brightness, energy efficiency, and error-free operation for a variety of automotive lighting needs.
- High-Intensity Illumination: 26 LED chips for superior brightness.
- Error-Free Design: Built-in resistors eliminate Canbus errors.
- Energy Efficient: Consumes only 5 watts per bulb.
- Compact Size: Fits standard automotive light housings.
- Versatile Use: Ideal for parking, cabin, and license plate lights.
- NOTE: Please ensure that the light housing has a minimum clearance of 26mm from the socket to accommodate the fitment of this long LED.
150W D3S/D3R D8S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D3S/R, D8S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
VW (Red) RCD 360 Pro II
We recommend upgrading to our advanced Android head unit instead:
7" Android Car Stereo for Volkswagen / Skoda
.
P21W BA15S LED For Reverse, Indicator, Brake Lamp Canbus Error-Free, No Hyperflash, Straight/Flat Pin Spin Angle (180°) Socket
Upgrade your vehicle’s lighting with the Canbus Error Free BA15S LED P21W Bulbs. Available in Amber, Red, and White, these Canbus error-free bulbs are perfect for indicators, brake lights, and rear fog lamps.
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- Color Options: Amber, Red, and White for versatile applications.
- Error-Free Operation: Compatible with Canbus systems.
- 360° Illumination: 44 curved LED chips for maximum brightness.
- Energy Efficient: Consumes only 25W, outperforming halogen bulbs.
- Easy Installation: Plug-and-play design for hassle-free replacement.
44 LED P21/5W BAY15D 1157 Amber LED
Bright, energy-efficient, and error-free P21/5W BAY15D LED for brakes and parking lights, offering 360-degree illumination for enhanced visibility.
- Canbus Error-Free P21/5W BAY15D LED Bulb
- 44 High-Quality 3030 LED Chips
- Energy Efficient with Plug-and-Play Installation
- Commonly used in Maruti Suzuki, Honda, Kia, Hyundai, etc.
- 360-Degree Brightness for Dual-Function Brake and Tail/Parking
Silver – Style A (match the key fob design)
Black – Style D (match the key fob design)
Reverse Camera Delay Timer Module
Fix reverse camera errors on your VW or Skoda with the RCA Delay Timer Module, Relay Camera Filter. This plug-and-play module stabilizes voltage and adds a 10-second delay for seamless compatibility with RCD/MIB systems.
- 10-Second Delay: Keeps camera active post-reverse gear.
- Stable 12V Output: No flickering or blank screens.
- Wide Compatibility: Works with RCD330, MIB, Polo, Vento, Rapid, and more.
- Tool-Free Install: Connects in minutes with standard plugs.
- Durable Design: ABS and copper construction.
ISO to Quadlock Connector Conversion Cable Canbus Harness for Volkswagen & Skoda RCD 330/340/510
Important
This product is sold with two options: with support and without support. Your choice is final. Support cannot be purchased separately at a later date. Support amount paid is non-refundable.
If you are not fully confident about CANBUS wiring or BCM compatibility, please select the with support plan at the time of purchase.
Upgrade your VW or Skoda stereo with the ISO to Quadlock Connector Conversion Cable. This adapter supports RCD 330/340, RNS 510, and Android head units, offering plug-and-play installation with no wire cutting.
- Seamless Compatibility: Works with RCD 330, RCD 340, RNS 510, and Android units.
- Canbus Harness: Includes two extended cables for BCM connection.
- Wide Fitment: Compatible with VAG PQ platform cars Polo, Vento, Jetta, Ameo, Fabia and Rapid.
- Durable Build: Ensures reliable and secure connections.
