Filter by brand
10 x Red Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
C5W C10W Canbus Error Free Festoon LED Auto Lighting (31mm to 41mm sizes)
Upgrade your vehicle’s lighting with the Canbus Error Free Festoon LED Light, also known as C5W, C10W bulbs. Featuring Canbus error-free technology and SMD LED chips, it delivers bright, energy-efficient illumination for cabin, license plate, and parking lights.
- Error-Free Design: Built-in Canbus resistors prevent dashboard errors.
- Energy Efficient: Consumes less than 3W per bulb.
- Multiple Sizes: Available in 31mm, 31-36mm combo, 36mm, 38mm, and 41mm.
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality SMD LED chips for longevity.
Male Connector Part no. 3B0 972 712
PQ to MQB Quadlock to Quadlock Converter (Without Tech Support)
Upgrade your Volkswagen or Skoda infotainment system with the PQ to MQB Quadlock Conversion Cable. This plug-and-play adapter ensures seamless integration from RCD330/340 units to MIB/Discover Media systems.
- Plug-and-Play: No rewiring or coding required.
- Full Compatibility: Retains steering controls and audio functions.
- Durable Design: Shielded cables for reliable signal transfer.
- Universal Fit: Works with VW/Skoda RCD330/340 systems.
- Easy Retrofit: Ideal for MIB/Discover Media upgrades.
Silver – Polo, Vento, Ameo, Rapid, Yeti, Superb, Laura, Yeti, Fabia, Jetta
OEM VAG Horn Connectors – Male/Female 4D0 971 992 with 6-inch Wires for Volkswagen, Skoda, Audi
OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
- OEM Fit: Direct replacement 4D0 971 992 connectors
- Dual Options: Available as male or female connectors
- Pre-Wired: 6-inch harness for easy installation
- High Power: 100W capacity for all horn types
10 x Blue T-Tap Connectors
Simplify wire connections with T-Tap Connector. Available in three sizes, these self-stripping terminals offer quick, secure, and durable solutions for automotive, marine, and DIY projects.
- Self-Stripping: No cutting, soldering, or stripping needed.
- Three Sizes: Red (22-18 AWG), Blue (18-14 AWG), Yellow (12-10 AWG).
- Durable: Tinned copper and flame-retardant PVC housing.
- Secure Fit: Stainless-steel spring buckle prevents loosening.
- Multiple Use Case: Ideal for cars, boats, and home wiring.
Premium Ultra Compact T10 Canbus LED Bulb – W5W WY5W Halogen Replacement for Automotive Lighting
Upgrade your vehicle’s lighting with the Ultra-Compact T10 Canbus LED Bulbs. These error-free, energy-efficient bulbs are perfect for replacing halogens in cabin lighting, license plates, and parking lights.
- Canbus Error-Free: No flickering or dashboard warnings.
- Ultra-Bright: 360LM per bulb with 3014 SMD LEDs.
- Plug-and-Play: Matches halogen size (9x23mm).
- Multi-Use: Ideal for interiors, license plates, and more.
- Energy Saver: Uses 80% less power than halogens.
Reverse Camera Delay Timer Module
Fix reverse camera errors on your VW or Skoda with the RCA Delay Timer Module, Relay Camera Filter. This plug-and-play module stabilizes voltage and adds a 10-second delay for seamless compatibility with RCD/MIB systems.
- 10-Second Delay: Keeps camera active post-reverse gear.
- Stable 12V Output: No flickering or blank screens.
- Wide Compatibility: Works with RCD330, MIB, Polo, Vento, Rapid, and more.
- Tool-Free Install: Connects in minutes with standard plugs.
- Durable Design: ABS and copper construction.
150W H3 6000K White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
W21W T20 DRL White
Upgrade your vehicle’s daytime running lights with the Canbus Error-Free DRL LED. Featuring 30 bright LEDs, a built-in 50W resistor, and customizable bulb socket matching your car, this LED ensures error-free operation and enhanced visibility.
- Custom Build-to-Order Design: Select from all the socket options available, whether P21W or PSX24W.
- Error-Free Operation: Built-in 50W resistor ensures Canbus compatibility.
- High Brightness LEDs: 30 LEDs provide optimal visibility and low heat.
- Durable & Efficient: Long-lasting construction with minimal power draw.
- Easy Installation: Rubber grommet and plug-and-play design for seamless setup.
144 LED White BA15S
Upgrade your vehicle’s lighting with the P21W BA15S 1156 LED Bulb. Featuring 144 SMD LEDs and error-free operation, it’s ideal for brakes, reverse lights, and indicators.
Important Fitment & Return Notice
This BA15S LED uses a 180° straight pin base. It is commonly used in brake lights and reverse lights. Only a few cars use this type in the indicator position, usually where the indicator lens or top cover is orange.
If your car uses a cross‑pin / offset base for the indicator (PY21W / BAU15S), please use this product instead: PY21W BAU15S Turn Signal LED
Please check your existing bulb type and socket before ordering.
This is a non‑returnable product. Returns will not be accepted for wrong bulb type, wrong socket (cross‑pin vs straight‑pin), or incorrect application.
- 21-25W Efficiency: Brighter than halogen, prevents dashboard errors.
- Error-Free Design: Built-in resistor prevents hyper-flashing.
- Dual Colors: White for reverse lights, Amber for brakes/indicators.
- Plug-and-Play: Direct replacement for halogen bulbs.
10 Pin MQB Automatic Headlight Switch for Vento Highline Plus
Upgrade to an Automatic Headlight Switch with part no. 5ND941431A for VW and Skoda models. Features integrated light sensor, three lighting modes, and OEM fit for easy plug-and-play installation.
- Automatic Headlight Switch – OEM part no. 5ND941431A with light sensor.
- Three Lighting Modes – Choose from Tunnel, Normal, and Delay for a custom experience.
- Plug-and-Play Design – 10-pin layout for seamless fit with VW and Skoda models.
- Durable Construction – ABS plastic and long 112cm cable for extended reliability.
- Compatible Models – Works with select VW and Skoda vehicles for easy, hands-free headlight control.
56W H7, H18 CSP3570
Upgrade your vehicle’s lighting with the 56W LED Headlight Fog Lamp. Featuring Canbus error-free technology and a 1:1 halogen design, these headlights deliver superior brightness and easy installation.
- High Brightness: 4,500 lumens for clear visibility.
- Canbus Error-Free: Compatible with 95% of vehicles.
- Plug-and-Play: No modifications required.
- Durable Build: Waterproof and weather-resistant.
- Wide Compatibility: Fits H4, H7, HB3, HB4, and more.
OEM Front & Rear Footwell Kits for Volkswagen and Skoda – 5GG 947 409
Upgrade your Volkswagen or Skoda’s interior with the OEM Front and Rear Footwell Kits. These kits add ambient lighting to your car’s footwells, enhancing visibility and style. Designed for easy DIY installation, they include halogen bulbs (upgradable to T10 LEDs) and pre-wired harnesses for a seamless setup.
- OEM Quality: Genuine part No. 5GG 947 409 ensures reliability.
- Front & Rear Options: Choose between front-only or front+rear lighting.
- Wide Compatibility: Fits Volkswagen Polo, Vento, Ameo, Skoda Rapid, Slavia, and more.
- DIY-Friendly: Includes pre-wired harnesses and OE connectors.
- LED-Upgradable: Swap halogen bulbs for T10 LEDs for brighter lighting. Grab LED from here
- Complete Kits: Comes with lights, harnesses, and fuse taps (only with front footwell).
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
160W H4 Tri Color Smart Bluetooth Controlled LED
Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.
- High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
- Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
- Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
- Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
- Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.