Filter by brand
150W H8, H9, H11, H16 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
130 Watt LED Headlight Fog Lamp with Canbus Error-Free Driver for Cars
130 Watt High-Performance LED Headlight for cars and bikes offer high brightness, 1:1 halogen compatibility, and a Canbus error-free driver for seamless installation. Perfect for all weather conditions!
- High Performance Series High Powered LED Headlight Bulb Fog Lamp Cornering LampBulbs for Cars and Bikes
- 1:1 design compared to halogen. NO Blindspot, NO scattered beam
- Available in 6000K White 120~130W/pair (60~65W per bulb) power consumption Heavy duty 3570 LED Chips
- In line canbus error free LED driver for highend cars. Suitable with 99% of the cars on the road
- Low profile and Plug and Play, no modification needed
Car Door Reflective Stickers – Safety Warning Reflectors for Open Doors
Enhance your vehicle’s safety with the Car Door Reflective Stickers. These high-visibility reflectors warn approaching vehicles when your car doors are open, reducing accident risks in low-light conditions.
- Enhanced Safety: Alerts drivers to open car doors.
- Multicolor Options: Available in Red, White, Yellow, and Green.
- Easy Installation: Peel-and-stick adhesive for quick setup.
- Durable Material: High-quality reflective plastic for longevity.
- Complete Coverage: Pack of 4 stickers for all car doors.
150W D4S/D4R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Motorcycle Clutch Brake Wire Lubricator Oiler Tool
Effortlessly lubricate throttle, clutch, and brake cables with this universal Motorcycle Cable Lubrication Tool. Simple to use and built to last, it’s an essential tool for smooth and reliable cable performance.
- Universal Fit: Suitable for motorcycles, scooters, and bicycles.
- Easy to Use: Inject lubricant effortlessly with the dual screw vise design.
- Durable Construction: Made from high-quality aluminum alloy for long-lasting use.
- Improved Design: Enhanced cable sealing for better performance.
- Compact and Portable: Small enough to fit in your toolbox, ready for any maintenance task.
Anti Glare IRVM (Mount no. 145) with Reverse Camera & DIsplay for Jeep Compass
Upgrade your vehicle’s rearview mirror with the 10.5" Anti-Glare IRVM. Featuring a 4.3" LCD screen and included reverse camera, this mirror enhances safety and visibility for all drivers.
- Anti-Glare Mirror: 10.5" rearview mirror with 4mm thick glass.
- Built-In LCD Screen: Displays reverse camera footage automatically.
- Automatic Brightness: Adjusts based on ambient light conditions.
- Dual Video Inputs: Connect GPS, DVD, or additional cameras.
- Universal Fit: Compatible with most vehicles. Select mount applicable to your car.
25A Regular/Standard Fuse (Pack of 10)
Protect your vehicle’s electrical system with the Regular Standard Fuse Kit. Featuring ATC, ATO, and APR fuses in a range of amperages, this kit is perfect for European cars and general-purpose applications.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy identification of fuse ratings.
- Durable Build: Zinc alloy terminals and non-conductive plastic.
- Wide Compatibility: Suitable for cars, trucks, SUVs, and boats.
- Easy Installation: Standard blade design for quick replacement.
H4 Mini Projector With Sharp Cut-Out 35W H4, HS1, H19 6000K White, 300% Brighter for Cars & Motorcycles
The H4 Mini Projector LED Headlight offers sharp cut-out beam control, bright 6000K light, and a long lifespan. Compatible with cars and motorcycles, it’s a reliable upgrade for superior visibility.
- 300% Brighter Than Halogen Bulbs: 35W power with CSP chips ensures exceptional brightness.
- Sharp Beam Cut-Off: Avoids glare for oncoming drivers.
- Efficient Heat Dissipation: Aviation-grade aluminum housing and cooling fan extend lifespan.
- Easy Installation: Plug-and-play design for H4/HS1/H19 sockets.
- Durable and Waterproof: IP65 rating ensures performance in all weather conditions.
Step-by-Step installation guide available here: Teambhp, courtesy: Atharva M.
100 x Red Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
H4/HS1 Dual Lens Mini Projector with Laser Spotlight
44 LED P21/5W BAY15D 1157 Red LED
Bright, energy-efficient, and error-free P21/5W BAY15D LED for brakes and parking lights, offering 360-degree illumination for enhanced visibility.
- Canbus Error-Free P21/5W BAY15D LED Bulb
- 44 High-Quality 3030 LED Chips
- Energy Efficient with Plug-and-Play Installation
- Commonly used in Maruti Suzuki, Honda, Kia, Hyundai, etc.
- 360-Degree Brightness for Dual-Function Brake and Tail/Parking
Waterproof Heat Shrink Solder Sleeve Connector for Cable Insulation Wire Connector (Different Sizes)
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
SIngle to Dual Horn Splitter Harness for Skoda Volkswagen
Important Purchase Notice
This is a non-returnable product. Please verify compatibility with your installer, dealer, or electrician before placing the order.
Order only after confirming the correct connector and use case for your vehicle.
Single to Dual Horn Harness - Complete plug-and-play kit to convert your single horn setup to dual horns without cutting factory wires.
- Complete Kit: 1 male + 2 female connectors pre-assembled with 1.2 meter long wiring harness.
- No Modification: Plug-and-play installation.
- Dual Conversion: Converts single connection to dual outputs.
- Compatible with: Skoda Kylaq, Kushaq, Slavia, Rapid. Volkswagen Polo, Taigun, Virtus, Vento etc.
- Connector Type: 4D0 971 992 male and female connectors.
25A Micro2 Fuse (Pack of 10)
Replacement Micro2 Fuse Kit: Perfect for protecting your vehicle's electrical system, this kit includes fuses compatible with cars, trucks, motorcycles, and more. Easy to use and color-coded for quick recognition, it ensures safe operation in case of overloads or short circuits.
- Multiple Amp Ratings: Available in 5A, 7.5A, 10A, 15A, 20A, 25A, and 30A
- Wide Compatibility: Fits cars, vans, trucks, motorcycles, boats, and more
- Durable Build: High-quality plastic cover for thermal and electrical protection
- Simple Installation: Standard blade fuses for easy replacement and backup
- Color-Coded: For quick identification of the correct fuse rating