Filter by brand
7.5A Regular/Standard Fuse (Pack of 10)
Protect your vehicle’s electrical system with the Regular Standard Fuse Kit. Featuring ATC, ATO, and APR fuses in a range of amperages, this kit is perfect for European cars and general-purpose applications.
- Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
- Color-Coded Design: Easy identification of fuse ratings.
- Durable Build: Zinc alloy terminals and non-conductive plastic.
- Wide Compatibility: Suitable for cars, trucks, SUVs, and boats.
- Easy Installation: Standard blade design for quick replacement.
T15 W16W/WY16W Canbus Error-Free LED Bulb – 2016 SMD LEDs, 360° Illumination, Plug-and-Play
Upgrade your vehicle’s lighting with the T15 W16W/WY16W Canbus Error-Free LED Bulb. Featuring 48 advanced 2016 SMD LEDs, it delivers bright, energy-efficient illumination for turn signals, reverse lights, and parking lights.
- 48x 2016 SMD LEDs: Brighter and more efficient than traditional LEDs.
- Canbus Error-Free: No hyperflashing or dashboard warnings.
- 360° Illumination: Ensures visibility from all angles.
- Plug-and-Play: Direct replacement for T15 W16W/WY16W halogen bulbs.
- Durable Cooling: Thick aluminum heat sink for extended lifespan.
- Note: Certain car does not accept LED in indicators (Mahindra) therefore require 25W resistor (link).
White P21W BA15S Flat Pin LED
Upgrade your vehicle's lighting with the P21W BA15S 1156 LED Bulb—designed for bright, error-free performance.
- Canbus Error-Free Design: Built-in resistor prevents hyperflashing for seamless operation.
- Energy Efficient: Consumes less than 15W compared to traditional 21W halogen bulbs.
- Bright Illumination: Equipped with 35 premium SMD LED chips for superior lighting performance.
- Plug-and-Play Installation: Matches the size of halogen bulbs for easy, modification-free installation.
- Wide Compatibility: Suitable for brake, reverse, fog, and parking lights in cars, bikes, and trucks.
SIngle to Dual Horn Splitter Harness for Skoda Volkswagen
Important Purchase Notice
This is a non-returnable product. Please verify compatibility with your installer, dealer, or electrician before placing the order.
Order only after confirming the correct connector and use case for your vehicle.
Single to Dual Horn Harness - Complete plug-and-play kit to convert your single horn setup to dual horns without cutting factory wires.
- Complete Kit: 1 male + 2 female connectors pre-assembled with 1.2 meter long wiring harness.
- No Modification: Plug-and-play installation.
- Dual Conversion: Converts single connection to dual outputs.
- Compatible with: Skoda Kylaq, Kushaq, Slavia, Rapid. Volkswagen Polo, Taigun, Virtus, Vento etc.
- Connector Type: 4D0 971 992 male and female connectors.
10 x Red Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
150W H8, H9, H11, H16 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
2 x 31mm Festoon LED
Upgrade your vehicle’s lighting with the Canbus Error Free Festoon LED Light, also known as C5W, C10W bulbs. Featuring Canbus error-free technology and SMD LED chips, it delivers bright, energy-efficient illumination for cabin, license plate, and parking lights.
- Error-Free Design: Built-in Canbus resistors prevent dashboard errors.
- Energy Efficient: Consumes less than 3W per bulb.
- Multiple Sizes: Available in 31mm, 31-36mm combo, 36mm, 38mm, and 41mm.
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality SMD LED chips for longevity.
130W H7, H18 6000K
130 Watt High-Performance LED Headlight for cars and bikes offer high brightness, 1:1 halogen compatibility, and a Canbus error-free driver for seamless installation. Perfect for all weather conditions!
- High Performance Series High Powered LED Headlight Bulb Fog Lamp Cornering LampBulbs for Cars and Bikes
- 1:1 design compared to halogen. NO Blindspot, NO scattered beam
- Available in 6000K White 120~130W/pair (60~65W per bulb) power consumption Heavy duty 3570 LED Chips
- In line canbus error free LED driver for highend cars. Suitable with 99% of the cars on the road
- Low profile and Plug and Play, no modification needed
150W D4S/D4R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D4S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
H19 Mini Projector for Cars, Trucks (Pack of 2)
150W D2S/D2R D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D2S/R HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
Premium 3 Inch Projector Shroud with Angel Eye DRL – Stylish Upgrade for Bi-LED/Bi-HID Headlights
Upgrade your headlights with the Premium 3 Inch Projector Shroud. Featuring integrated Angel Eye DRL, this shroud enhances both style and visibility for Bi-LED and Bi-HID systems.
- Integrated DRL: Bright and efficient Angel Eye design.
- Multiple Styles: Choose from Rectangle, Boxy, or Round.
- Durable Build: Resistant to high temperatures and wear.
- Easy Installation: Fits most 3-inch projectors seamlessly.
- Stylish Upgrade: Adds a modern look to your vehicle.
2 x 41mm Festoon LED
Upgrade your vehicle’s lighting with the Canbus Error Free Festoon LED Light, also known as C5W, C10W bulbs. Featuring Canbus error-free technology and SMD LED chips, it delivers bright, energy-efficient illumination for cabin, license plate, and parking lights.
- Error-Free Design: Built-in Canbus resistors prevent dashboard errors.
- Energy Efficient: Consumes less than 3W per bulb.
- Multiple Sizes: Available in 31mm, 31-36mm combo, 36mm, 38mm, and 41mm.
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality SMD LED chips for longevity.
D4S D4R HID to LED Conversion Kit (Plug and Play)
The D Series LED Turbo Lights offer a seamless HID to LED conversion for vehicles with HID Xenon lamps. With high brightness, advanced cooling, and a simple plug & play setup, these lights provide a reliable and efficient upgrade.
- High Brightness: 15000LM/Pair for superior illumination
- Easy Installation: Plug & Play, no modifications needed
- Advanced Cooling: Aluminum + High-Speed Fan (12000RPM)
- Durable: Lifespan over 50,000 hours, IP68 waterproof
- Versatile Compatibility: Supports D1S, D2S, D3S/D8S, D4S, D5S sockets
Important: Works with stock HID Ballast only. Ensure ballast is in working condition.
150W HB3 9005 6000K White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.