Filter by brand
OEM Dual Tone Horn Set for Volkswagen Skoda Audi
OEM Dual Tone Horn Set - Direct replacement for Audi, Volkswagen, and Skoda vehicles. Features high and low tone discs with pre-attached mounting bracket.
- Complete Set: High + low tone horns included
- Wide Compatibility: Fits Virtus, Slavia, Kylaq, Taigun, Polo, Rapid, Octavia, A3, A4, etc.
- Durable Build: IP67 waterproof, salt spray tested
- Easy Installation: Metal bracket pre-attached
Important: VW branding will appear scratched out due to import restrictions on VAG branded product imports.
Anti-Glare ORVM Mirror Glass for Toyota Crysta, Hilux, Fortuner (16-25)
Plug and Play Automatic Headlight Switch For VW Polo, Vento, Ameo, Skoda Rapid and More
Upgrade your Volkswagen or Skoda with the Automatic Headlight Switch. Featuring a high-precision light sensor and plug-and-play installation, it automates headlight operation for enhanced convenience and safety.
- Plug-and-Play: No wiring modifications required.
- Light Sensor: Automatically adjusts headlights based on ambient light.
- Three Modes: Tunnel (1s), Normal (3s), and Delay (5s).
- Durable Build: High-quality ABS plastic for longevity.
- Compatible Models: VW Polo, Vento, Ameo, Skoda Rapid, and more.
Silver – Style A (match the key fob design)
H4 Mini Projector With Sharp Cut-Out 35W H4, HS1, H19 6000K White, 300% Brighter for Cars & Motorcycles
The H4 Mini Projector LED Headlight offers sharp cut-out beam control, bright 6000K light, and a long lifespan. Compatible with cars and motorcycles, it’s a reliable upgrade for superior visibility.
- 300% Brighter Than Halogen Bulbs: 35W power with CSP chips ensures exceptional brightness.
- Sharp Beam Cut-Off: Avoids glare for oncoming drivers.
- Efficient Heat Dissipation: Aviation-grade aluminum housing and cooling fan extend lifespan.
- Easy Installation: Plug-and-play design for H4/HS1/H19 sockets.
- Durable and Waterproof: IP65 rating ensures performance in all weather conditions.
Step-by-Step installation guide available here: Teambhp, courtesy: Atharva M.
100 x Red Heat Shrinking Sleeves
The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.
- All-in-One Solution: Combines soldering, sealing, and insulation.
- IP67 Waterproof: Ensures maximum water and corrosion resistance.
- High-Quality Materials: Polyolefin tubing and hot melt adhesive.
- Easy to Use: No additional tools required; heat shrink technology.
- Wide Compatibility: Available in multiple sizes for various wire gauges (click here).
White Double Sided Flat T10 W5W W10W LED
H8, H9, H11, H16 Mini Projector
Upgrade your vehicle with the LED Mini Projector Headlight/Fog Light. Featuring a plug-and-play design, crisp beam focus, and superior heat management, it’s perfect for enhancing visibility and safety.
- Easy plug-and-play installation with no modifications required.
- Sharp LHD projector-style light beam for focused illumination.
- IP65 rated for dust and waterproof performance.
- Compact design compatible with H8/H9/H11, H16 sockets.
- Advanced cooling with aviation-grade turbo fan and thermal system.
Polo/Vento/Rapid Anti-Glare ORVM Mirror Glass (Type 2 & 3 2014-2022)
Reverse Camera Delay Timer Module
Fix reverse camera errors on your VW or Skoda with the RCA Delay Timer Module, Relay Camera Filter. This plug-and-play module stabilizes voltage and adds a 10-second delay for seamless compatibility with RCD/MIB systems.
- 10-Second Delay: Keeps camera active post-reverse gear.
- Stable 12V Output: No flickering or blank screens.
- Wide Compatibility: Works with RCD330, MIB, Polo, Vento, Rapid, and more.
- Tool-Free Install: Connects in minutes with standard plugs.
- Durable Design: ABS and copper construction.
160W D3S/D3R D8S D Series HID to LED Kit 4300K Warm White
This product is a D-Series LED replacement for D3S/R, D8S HID bulbs and is not plug-and-play with the factory HID ballast.
- It does NOT include the standard D-Series block connector that plugs into the ballast.
- The LED operates using two direct power wires only:
- Red wire: Positive (+)
- Black wire: Ground / Negative (–)
- These wires must be connected to the vehicle’s headlight power supply before the ballast.
- The factory HID ballast must be bypassed or disconnected for proper operation.
H4/H19 Canbus Decoder
Resolve LED headlight errors and flickering with the Intelligent LED Headlight Canbus Decoder. Compatible with H7, H8, H11, HB3, and H4 bulbs, this plug-and-play decoder ensures error-free performance for your vehicle’s lighting system.
- Error-Free Operation: Eliminates dashboard warnings and flickering.
- Wide Compatibility: Supports H7, H8, H11, HB3, H4, and cross-compatible bulb types.
- High Power Handling: Up to 60W and 5A current.
- Plug-and-Play: No tools or modifications needed.
- Durable Build: High-quality plastic and copper components.
2 x 31mm Festoon LED
Upgrade your vehicle’s lighting with the Canbus Error Free Festoon LED Light, also known as C5W, C10W bulbs. Featuring Canbus error-free technology and SMD LED chips, it delivers bright, energy-efficient illumination for cabin, license plate, and parking lights.
- Error-Free Design: Built-in Canbus resistors prevent dashboard errors.
- Energy Efficient: Consumes less than 3W per bulb.
- Multiple Sizes: Available in 31mm, 31-36mm combo, 36mm, 38mm, and 41mm.
- Plug-and-Play: Direct halogen replacement.
- Durable Build: High-quality SMD LED chips for longevity.
150W H8, H9, H11, H16 4300K Warm White
150W LED headlight upgrade – CSP 4070 LEDs with 4300K Warm White or 6000K Pure White for better night visibility and a focused beam in standard halogen sockets.
- High power: 150W per pair (75W each) for strong, even light.
- Color choice: 4300K for poor weather or 6000K for a crisp white look.
- Cooling system: Dual copper tubes with turbo fan cooling.
- Sockets: H1, H3, H4/H19, HB3, HB4, H7/H18, H8/H9/H11/H16, H27/881.
- Note: Not a dual color LED – pick your preferred color at checkout.
Front & Rear Footwell Kit for VW Skoda
Upgrade your Volkswagen or Skoda’s interior with the OEM Front and Rear Footwell Kits. These kits add ambient lighting to your car’s footwells, enhancing visibility and style. Designed for easy DIY installation, they include halogen bulbs (upgradable to T10 LEDs) and pre-wired harnesses for a seamless setup.
- OEM Quality: Genuine part No. 5GG 947 409 ensures reliability.
- Front & Rear Options: Choose between front-only or front+rear lighting.
- Wide Compatibility: Fits Volkswagen Polo, Vento, Ameo, Skoda Rapid, Slavia, and more.
- DIY-Friendly: Includes pre-wired harnesses and OE connectors.
- LED-Upgradable: Swap halogen bulbs for T10 LEDs for brighter lighting. Grab LED from here
- Complete Kits: Comes with lights, harnesses, and fuse taps (only with front footwell).
OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.
