Automotive - Durvient®

Skip to main content

Showing 145–160 of 392 results

Show 9 12 18 24 36

Sold out

Add to wishlist

Pack of 2 Posi-Taps

Rated 4.00 out of 5

Read more

Simplify your electrical connections with the Non-Splice Posi-Tap Connector EX-130R-604. Designed for 16-18 AWG (0.75 ~ 1.5 sq mm) wires, this tool-free, hot-swappable connector ensures secure, non-destructive wiring for automotive and electrical projects.

Non-Splice Design: Tap into wires without cutting or crimping.
Tool-Free Installation: No crimping, soldering, or tape required.
Hot Swappable: Easily connect or disconnect wires as needed.
Wide Compatibility: Works with 16-18 AWG wires.
Durable Build: Made from high-quality ABS material.

-60%

Add to wishlist

D3S HID Ballast for Audi Skoda Volkswagen Part No. 8K0 941 597

Pc

Material: aluminum alloy; Input Voltage: 12V; Output Voltage: 85V; Output Power: 35W; Lifetime expectancy: 2000H; Compatibility: D3S/D3R D4S/D4R; Fits: left or right headlight
OEM Part Number : 8K0941597, 8K0941597E; Interchange Part Number : 8K0941597E, BAM92-143700, W003T20171, W003T22071
Fits Audi, BMW, Mercedes, Volkswagen, Skoda, Lamborgini with D3S/D4S HID/Xenon Headlight
Easy Installation : Direct Replacement, no coding/programming required
Note: please check if the number of your previous xenon ballast is exactly the same as the number(s) stated in the listing, or through the amazonconfirmedfit to make sure weather it fit for your previous hid ballast

-33%

Add to wishlist

VAG Horn Male Connector

Rated 4.86 out of 5

Pc

OEM VAG Horn Connectors - Genuine male and female 2-pin connectors with 6-inch wiring for seamless horn upgrades and extensions in VW, Audi, Skoda vehicles.

OEM Part – Non‑Returnable: This product is based on OEM part number. Please confirm this part number and compatibility with your vehicle or installer before ordering. Orders placed with the wrong part number are not eligible for return or exchange.

OEM Fit: Direct replacement 4D0 971 992 connectors
Dual Options: Available as male or female connectors
Pre-Wired: 6-inch harness for easy installation
High Power: 100W capacity for all horn types

-20%

Add to wishlist

10 x Red Heat Shrinking Sleeves

Packs

The Waterproof Heat Shrink Solder Sleeve Connector combines soldering, sealing, and insulation for durable, IP67-rated wire protection. Perfect for electronics, automotive, marine, and DIY applications.

All-in-One Solution: Combines soldering, sealing, and insulation.
IP67 Waterproof: Ensures maximum water and corrosion resistance.
High-Quality Materials: Polyolefin tubing and hot melt adhesive.
Easy to Use: No additional tools required; heat shrink technology.
Wide Compatibility: Available in multiple sizes for various wire gauges (click here).

-22%

Add to wishlist

H8/H9/H11/H16 Canbus Decoder

Pair

Resolve LED headlight errors and flickering with the Intelligent LED Headlight Canbus Decoder. Compatible with H7, H8, H11, HB3, and H4 bulbs, this plug-and-play decoder ensures error-free performance for your vehicle’s lighting system.

Error-Free Operation: Eliminates dashboard warnings and flickering.
Wide Compatibility: Supports H7, H8, H11, HB3, H4, and cross-compatible bulb types.
High Power Handling: Up to 60W and 5A current.
Plug-and-Play: No tools or modifications needed.
Durable Build: High-quality plastic and copper components.

-39% Sold out

Add to wishlist

ISO to MQB Quadlock Connector Cable For Plug-and-Play Upgrade for RCD360 Pro, Discover Media & MIB Systems

Rated 5.00 out of 5

Upgrade your Volkswagen’s infotainment system effortlessly with the ISO to MQB Quadlock Connector Cable. This plug-and-play adapter ensures seamless compatibility with RCD360 Pro, Discover Media, and MIB systems.

Plug-and-Play: No wiring modifications needed.
High Compatibility: Supports RCD360 Pro, Discover Media, and MIB.
Durable Build: ABS housing and copper wiring for reliability.
Extendable Canbus: Flexible installation for complex setups.
Lossless Signal: Crisp audio and stable connectivity.

Add to wishlist

5A Mini Fuse (Pack of 10)

₹229.00 Pack of 10

Protect your vehicle’s electrical system with the Mini Fuse ATM APM Fuse Kit. Designed for European cars, this kit includes color-coded fuses in multiple amperage ratings for easy identification and quick replacement.

Wide Amperage Range: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.
Color-Coded Design: Easy to identify and replace.
Durable Materials: Zinc alloy and non-conductive plastic.
Wide Compatibility: Fits Volkswagen, Audi, BMW, Mercedes, and more.
Secure Storage: Includes a labeled storage box.

-46%

Add to wishlist

Professional Automotive Wiring Harness Tape – Flame-Retardant Felt Cloth Tape (19mm x 15M)

Rated 5.00 out of 5

Roll

Upgrade your automotive wiring protection with Automotive Wiring Harness Tape flame-retardant felt cloth tape. Designed for high temps and easy installation, it reduces noise and ensures professional-grade durability.

Heat-Resistant: Withstands up to 105°C for engine bay use.
Strong Adhesive: No residue, secure bonding.
Easy to Tear: No tools needed – tear by hand.
Durable: Resists oil, abrasion, and moisture.
Vibration Control: Minimizes coil whine and rattling.

-25% Sold out

Add to wishlist

B-Shape Rubber Seal for Cars & Home

Rated 4.64 out of 5

Read more

Upgrade your vehicle’s insulation with the B-Type Car Door Rubber Seal. This 5-meter strip reduces noise and seals out dust, water, and wind for a smoother, quieter drive.

Noise Reduction: Blocks road and wind noise effectively.
Weatherproof Design: Protects against dust, moisture, and debris.
3M Adhesive: Easy DIY installation with no tools required.
Universal Fit: Works on doors, trunks, engine bays, and windows.
Durable Rubber: Flexible and long-lasting.

-16%

Add to wishlist

Industrial Grade 10 Watt Resistor Load Resistor For Motorcycle Car Indicator Hyperflash Fix

Pcs

10 Watt Resistor solve canbus errors and stabilize electrical loads. Rated for 10W 10 Ohm wirewound aluminum case resistor. Prevent fast blinking in indicator/turn signals for motorcycles and cars with ease. Designed for industrial and automotive-grade performance, it’s durable, efficient, and highly versatile.

Canbus Error Decoding/Fast Blink Fix: Solves canbus errors and stabilizes electrical loads. Prevents fast blinking in motorcycle and car indicators/turn signals.
High Performance: 10W power rating, 10 Ohm resistance, and 5% tolerance ensure precision and stability.
Superior Durability: Sturdy aluminum casing resists high temperatures, moisture, and vibrations.
Efficient Heat Dissipation: Prevents overheating with its advanced aluminum shell design.
Wide Applications: Compatible with cars, motorcycles, inverters, LED lights, speakers, power supplies, and more.
Easy Installation: Screw-mounted design with compact dimensions for seamless integration.

R11-4575-Tri-Color-H4-1P

-31%

Add to wishlist

160W H4 Tri Color Smart Bluetooth Controlled LED

Rated 5.00 out of 5

2 LEDs

Smart 160W tri-color Smart LED Headlight - App-controlled brightness and color from 3000K to 6000K, with Canbus support and compact fit for popular halogen sockets.

High power: Up to 160W per pair with 4575 CSP chips for strong illumination.
Tri-color output: Switch between 3000K yellow, 4300K warm, and 6000–6500K white in the app.
Smart control: Bluetooth driver lets you fine-tune brightness and beam behavior from your phone.
Cooling and build: Zinc alloy body, four copper tubes, and a silent fan for stable performance.
Canbus ready: EMC and error-free design for most cars, trucks, and motorcycles.

-39%

Add to wishlist

150W H7 H18 4300K Warm White

Rated 4.89 out of 5

Pair

H7, H18 are cross compatible.

mirror adjustment switch for polo vento ameo

-34% Sold out

Add to wishlist

Folding Heated ORVM Switch for Polo Vento Ameo

Read more

OEM Mirror Adjustment Switch - Heated, Folding Compatible, Red Backlit

Direct Replacement: Plug & play for Gen2/Gen3 Polo, Vento, Ameo with folding mirrors.
Heated Mirror Ready: Activates heated mirror feature if enabled in BCM.
Red Backlight: Clearly visible at night.
Easy Fit: No wiring or coding for basic install.
Includes: 1 mirror adjustment switch.

-22% Sold out

Add to wishlist

PQ ISO to Quadlock Cable (With Tech Support)

Rated 4.80 out of 5

Read more

Tech support and cable/connector included. Tech support Fee is non-refundable, and is limited to a maximum of 15 minutes of support, available for one-time use only. Support is provided via Call or Chat.

-20% Sold out

Add to wishlist

Anti Glare IRVM (Mount no. 110) with Reverse Camera & DIsplay for Maruti Alto (cabin light unit)

Read more

Mount #	CAR MANUFACTURERS	CAR MODELS
#110	Maruti Suzuki	Alto

-15%

Add to wishlist

Polo/Vento Auto Switch (External Sensor)

Rated 5.00 out of 5

Qty

📦 Pre-Order Notice

This product is available for pre-order with an estimated delivery time of 20-25 days from your order date.

By placing a pre-order, you'll secure your unit from our upcoming shipment and receive priority processing. Your payment will only be processed when your order is ready to ship.

We'll keep you updated throughout the process via email & whatsapp. Thank you for your patience and understanding!

BE THE FRIST TO KNOW

Newsletter Subscribe

No spamming, thats our promise.

LETS GET SOCIAL

Follow Us

You like social media? Take us along.