• 4D0971992 part no. 4D0 971 992
1 6

OEM 2-Pin Horn Connector 4D0 971 992 for Volkswagen, Skoda, Audi

Pre-wired 6-inch pigtail harness with weatherproof seals for horn repair and upgrades

4.9 7 reviews 2 sold in the last 24 hours
Rs. 549.00 Rs. 800.00

Inclusive of all taxes. Extra 2% off on UPI (Auto applied)

  • 4D0971992 part no. 4D0 971 992
1 6
Socket/Connector
Quantity

Secure payments

Check delivery & Partial COD Availibility

Enter your PIN code to see the earliest available delivery estimate.

Estimated Delivery Date

Express shipping available on checkout, partial COD may be available to eligible customers.

Delivery dates are based on past performance

Daily Dispatch
Trusted Brand
Technical Support

FREQUENTLY BOUGHT TOGETHER

OEM Dual Tone Horn Set for Audi, Volkswagen & Skoda 38% OFF OEM Dual Tone Horn Set for Audi, Volkswagen & Skoda Rs. 4,000 Rs. 2,499
Total price (0 items)

Product Highlights

  • OEM Factory Standard: Engineered to precise VAG 4D0 971 992 dimensions for secure, vibration-resistant latching.
  • Pre-Wired 6-Inch Pigtail: Ready-to-install stranded copper leads simplify wire splicing, crimping, or soldering.
  • Weatherproof Silicone Sealing: Internal rubber seals protect terminals from moisture, road dirt, and corrosion.
  • Dual Options Available: Choose Female connector (plugs into horn) or Male connector (plugs into factory loom).

Got questions?

FREQUENTLY ASKED QUESTIONS

Quick answers to common questions about fitment, installation, and product use.

What is the difference between the male and female connector options?
The Female connector (4D0 971 992) plugs directly into the horn terminals (ideal for replacing damaged horn sockets or wiring aftermarket horns into OEM horns). The Male connector plugs into the vehicle's factory wiring harness (ideal for extending horn wiring or adapting aftermarket horn units without cutting factory wiring).
Can I use these connectors to install aftermarket horns?
Yes. Using the male connector, you can tap into your vehicle's factory horn socket to feed any aftermarket horn relay or harness without cutting or splicing into original factory wires.
Which vehicles are compatible with these 4D0 971 992 connectors?
These connectors are strictly compatible with Volkswagen, Škoda, and Audi vehicles equipped with standard 2-pin VAG horn connectors, including VW Polo, Vento, Ameo, Jetta, Passat, Touareg, Taigun, Virtus; Škoda Kylaq, Kushaq, Slavia, Octavia, Superb II, Laura, Yeti, Fabia, Rapid; and all Audi models.
Are the connectors pre-wired?
Yes, each connector comes pre-assembled with approximately 6-inch high-conductivity copper pigtail leads with sealed terminal pins, allowing quick soldering or crimping.
Are these connectors weatherproof?
Yes. The connectors feature integrated internal silicone rubber weather seals and secure latch mechanisms to keep out moisture, road dirt, and engine bay contaminants.

Product Details

Description

OEM 2-Pin Horn Connector 4D0 971 992 for Volkswagen, Skoda, Audi

Perform clean electrical repairs and professional horn upgrades with genuine OEM 2-Pin Horn Connectors (Part No. 4D0 971 992). Manufactured to strict factory VAG specifications, these pre-assembled pigtail connectors feature 6-inch stranded copper leads for seamless replacement of damaged factory plugs or for building custom dual-horn extension harnesses.

Male vs. Female Connector Selection

  • Female Connector (4D0 971 992): Plugs directly onto the horn terminals. Ideal for replacing broken factory sockets, replacing corroded horn plugs, or wiring dual trumpet horns.
  • Male Connector: Plugs directly into your vehicle's factory wiring harness loom. Allows you to extend horn wiring or connect aftermarket horn relays without cutting original factory wiring.

Key Features

  • Direct OEM Fitment: Built to exact Volkswagen Group dimensions for a positive, snap-lock engagement with zero play.
  • Weatherproof Moisture Seal: Internal silicone rubber gaskets seal out water, road salt, and engine bay grime to prevent terminal corrosion.
  • Pre-Wired 6-Inch Leads: High-conductivity automotive-grade copper pigtails save installation time and simplify solder or crimp connections.
  • High Current Capacity: Safely handles continuous electrical loads up to 100W at 12V DC for high-performance dual-tone trumpet horns.
In The Box
  • 1 x Pre-Wired 2-Pin VAG Horn Connector Pigtail (Selected Male or Female Option)
Shipping & Returns
  • Not Returnable
Warranty
  • Not Applicable

YOU MAY ALSO LIKE

  • 5 stars: 6 (86%)
  • 4 stars: 1 (14%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
S
Sandip

I purchased the connectors and installed them in my Taigun Comfortline.

They work flawlessly, and no wiring had to be cutâ they perfectly fit VAG cars. The accessories' quality is great, no doubt about it.

I installed them myself because a third-party installer had torn my bumper by half an inch, so I canceled their service and did it myself.

I'm really impressed with the quality of the accessories!"

Sandip review photo
S
Sandip

I purchased the connectors and installed them in my Taigun Comfortline.

They work flawlessly, and no wiring had to be cut — they perfectly fit VAG cars. The accessories' quality is great, no doubt about it.

I installed them myself because a third-party installer had torn my bumper by half an inch, so I canceled their service and did it myself.

I'm really impressed with the quality of the accessories!"

Sandip review photo
j
jakeazazel

Used these (2x female) connectors to install VW HITGT horns on a Hyundai i20 N Line. Along with a Hyundai male connector (sourced elsewhere), a splitter can be easily cooked up to turn the weak stock single horn into something nice and premium sounding. The connectors are made really well, and fit/clip to the horns properly. There is virtually no difference between stock VW wiring and these connectors. They do not look or feel aftermarket at all. Forget water entry, they almost feel airtight. Will buy again if required on other cars.

A
Atith P.

Good product

U
Upendra

Good

D
Devender D.

Same product and proper fitting

G
Gaurav K.

I bought this for my right side/low tone horn connector whose wires were broken from inside. This one is just the perfect replacement for the OEM. Completely snug fit and OEM finish too. Waterproofing also done inside.